Drop src/config alltogether

- drop two "newconfig" based files
- drop two obsolete doxygen config files and check
  in our latest Doxyfile.coreboot (that has been 
  used to build coreboot online documentation since
  2005 or so)
- move two i386 specific linker scripts to src/arch/i386

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5105 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 0 insertions, 132 deletions

diff --git a/src/config/coreboot_ram.ld b/src/config/coreboot_ram.ld
deleted file mode 100644
index afdf8a5522..0000000000
--- a/src/config/coreboot_ram.ld
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- *	Memory map:
- *
- *	CONFIG_RAMBASE		
- *				: data segment
- *				: bss segment
- *				: heap
- *				: stack
- */
-/*
- * Bootstrap code for the STPC Consumer
- * Copyright (c) 1999 by Net Insight AB. All Rights Reserved.
- */
-
-/*
- *	Written by Johan Rydberg, based on work by Daniel Kahlin.
- *      Rewritten by Eric Biederman
- *  2005.12 yhlu add coreboot_ram cross the vga font buffer handling
- */
-/*
- *	We use ELF as output format. So that we can
- *	debug the code in some form. 
- */
-INCLUDE ldoptions
-
-ENTRY(_start)
-
-SECTIONS
-{
-	. = CONFIG_RAMBASE;
-	/*
-	 * First we place the code and read only data (typically const declared).
-	 * This get placed in rom.
-	 */
-	.text : {
-		_text = .;
-		*(.text);
-		*(.text.*);
-		. = ALIGN(16);
-		_etext = .;
-	}
-	.rodata : {
-		_rodata = .;
-		. = ALIGN(4);
-		console_drivers = .;
-		*(.rodata.console_drivers)
-		econsole_drivers = . ;
-		. = ALIGN(4);
-		pci_drivers = . ;
-		*(.rodata.pci_driver)
-		epci_drivers = . ;
-		cpu_drivers = . ;
-		*(.rodata.cpu_driver)
-		ecpu_drivers = . ;
-		*(.rodata)
-		*(.rodata.*)
-		/*
-		 * kevinh/Ispiri - Added an align, because the objcopy tool
-		 * incorrectly converts sections that are not long word aligned.
-		 * This breaks the coreboot.rom target.
-		 */
-		 . = ALIGN(4);
-
-		_erodata = .;
-	}	
-	/*
-	 * After the code we place initialized data (typically initialized
-	 * global variables). This gets copied into ram by startup code.
-	 * __data_start and __data_end shows where in ram this should be placed,
-	 * whereas __data_loadstart and __data_loadend shows where in rom to
-	 * copy from.
-	 */
-	.data : {
-		_data = .;
-		*(.data)
-		_edata = .;
-	}
-
-	.sdata : {
-		_SDA_BASE_ = .;
-		*(.sdata)
-	}
-
-	.sdata2 : {
-		_SDA2_BASE_ = .;
-		*(.sdata2)
-	}
-
-	/*
-	 * bss does not contain data, it is just a space that should be zero
-	 * initialized on startup. (typically uninitialized global variables)
-	 * crt0.S fills between _bss and _ebss with zeroes.
-	 */
-	_bss = .;
-	.bss . : {
-		*(.bss)
-		*(.sbss)
-		*(COMMON)
-	}
-	_ebss = .;
-	_end = .;
-	. = ALIGN(CONFIG_STACK_SIZE);
-	_stack = .;
-	.stack . : {
-		/* Reserve a stack for each possible cpu */
-		/* the stack for ap will be put after pgtbl in 1M to CONFIG_RAMTOP range when VGA and ROM_RUN and CONFIG_RAMTOP>1M*/
-		. = ((CONFIG_CONSOLE_VGA || CONFIG_PCI_ROM_RUN)&&(CONFIG_RAMBASE<0x100000)&&(CONFIG_RAMTOP>0x100000) ) ? CONFIG_STACK_SIZE : (CONFIG_MAX_CPUS*CONFIG_STACK_SIZE);
-	}
-	_estack = .;
-        _heap = .;
-        .heap . : {
-                /* Reserve CONFIG_HEAP_SIZE bytes for the heap */
-                . = CONFIG_HEAP_SIZE ;
-                . = ALIGN(4);
-        }
-        _eheap = .;
-	/* The ram segment
- 	 * This is all address of the memory resident copy of coreboot.
-	 */
-	_ram_seg = _text; 
-	_eram_seg = _eheap;
-
-	_bogus = ASSERT( ( _eram_seg < (CONFIG_RAMTOP)) , "please increase CONFIG_RAMTOP");
-
-        _bogus = ASSERT( !((CONFIG_CONSOLE_VGA || CONFIG_PCI_ROM_RUN) && ((_ram_seg<0xa0000) && (_eram_seg>0xa0000))) , "please increase CONFIG_RAMTOP and if still fail, try to set CONFIG_RAMBASE more than 1M");
-
-	/DISCARD/ : {
-		*(.comment)
-		*(.note)
-		*(.note.*)
-	}
-}