- Moved hlt() to it's own header.

- Reworked pnp superio device support.  Now complete superio support is less than 100 lines.
- Added support for hard coding resource assignments in Config.lb
- Minor bug fixes to romcc
- Initial support for catching the x86 processor BIST error codes.  I've only seen
  this trigger once in production during a very suspcious reset but...
- added raminit_test to test the code paths in raminit.c for the Opteron
- Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED
  so we can tell what we have really done.
- Added generic AGP/IOMMU setting code to x86
- Added an implementation of memmove and removed reserved identifiers from memcpy
- Added minimal support for booting on pre b3 stepping K8 cores
- Moved the checksum on amd8111 boards because our default location was on top of
  extended RTC registers
- On the Hdama added support for enabling i2c hub so we can get at the temperature
  sensors.  Not that i2c bus was implemented well enough to make that useful.
- Redid the Opteron port so we should only need one reset and most of memory initialization
  is done in cpu_fixup.  This is much, much faster.
- Attempted to make the VGA IO region assigment work.  The code seems to work now...
- Redid the error handling in amdk8/raminit.c to distinguish between a bad value
  and a smbus error, and moved memory clearing out to cpufixup.
- Removed CONFIG_KEYBOARD as it was useless.  See pc87360/superio.c for how to
  setup a legacy keyboard properly.
- Reworked the register values for standard hardware, moving the defintions from
  chip.h into the headers of the initialization routines.  This is much saner
  and is actually implemented.
- Made the hdama port an under clockers BIOS.  I debuged so many interesting problems.
- On amd8111_lpc added setup of architectural/legacy hardware
- Enabled PCI error reporting as much as possible.
- Enhanded build_opt_tbl to generate a header of the cmos option locations so
  that romcc compiled code can query the cmos options.
- In romcc gracefully handle function names that degenerate into function pointers
- Bumped the version to 1.1.6 as we are getting closer to 2.0

  TODO finish optimizing the HT links of non dual boards
  TODO make all Opteron board work again
  TODO convert all superio devices to use the new helpers
  TODO convert the via/epia to freebios2 conventions
  TODO cpu fixup/setup by cpu type


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

2 files changed, 45 insertions, 11 deletions

diff --git a/src/config/Config.lb b/src/config/Config.lb
index 4a99d07ffa..636e5537c6 100644
--- a/src/config/Config.lb
+++ b/src/config/Config.lb
@@ -7,7 +7,7 @@ makedefine LIBGCC_FILE_NAME := $(shell $(CC) -print-libgcc-file-name)
 makedefine GCC_INC_DIR := $(shell $(CC) -print-search-dirs | sed -ne "s/install: \(.*\)/\1include/gp")
 
 makedefine CPPFLAGS := -I$(TOP)/src/include -I$(TOP)/src/arch/$(ARCH)/include -I$(GCC_INC_DIR) $(CPUFLAGS)
-makedefine ROMCCPPFLAGS := -D__ROMCC__=0 -D__ROMCC_MINOR__=37
+makedefine ROMCCPPFLAGS := -D__ROMCC__=0 -D__ROMCC_MINOR__=38
 makedefine CFLAGS := $(CPU_OPT) $(CPPFLAGS) -Os -nostdinc -nostdlib -fno-builtin  -Wall
 
 makedefine HOSTCFLAGS:= -Os -Wall
@@ -116,12 +116,12 @@ end
 
 makerule ./romcc   
 	depends	"$(TOP)/util/romcc/romcc.c" 
-	action	"$(HOSTCC) -g $(HOSTCFLAGS) -DVERSION='\"0.37\"' -DRELEASE_DATE='\"21 October 2003\"' $< -o $@"
+	action	"$(HOSTCC) -g $(HOSTCFLAGS) -DVERSION='\"0.38\"' -DRELEASE_DATE='\"18 December 2003\"' $< -o $@"
 end
 
 makerule build_opt_tbl   
-	depends	"$(TOP)/util/options/build_opt_tbl.c $(TOP)/src/include/pc80/mc146818rtc.h $(TOP)/src/include/boot/linuxbios_tables.h" 
-	action	"$(HOSTCC) $(HOSTCFLAGS) $< -o $@"
+	depends	"$(TOP)/util/options/build_opt_tbl.c $(TOP)/src/include/pc80/mc146818rtc.h $(TOP)/src/include/boot/linuxbios_tables.h Makefile.settings Makefile"
+	action	"$(HOSTCC) $(HOSTCFLAGS) $(CPUFLAGS) $< -o $@" 
 end
 
 #makerule /$(TARGET_DIR)/option_table.c
@@ -131,7 +131,12 @@ end
 
 makerule option_table.c
 	depends	"build_opt_tbl $(MAINBOARD)/cmos.layout" 
-	action	"./build_opt_tbl -b  --config $(MAINBOARD)/cmos.layout"
+	action	"./build_opt_tbl -b  --config $(MAINBOARD)/cmos.layout --header option_table.h"
+end
+
+makerule option_table.h
+	depends	"build_opt_tbl $(MAINBOARD)/cmos.layout" 
+	action	"./build_opt_tbl -b  --config $(MAINBOARD)/cmos.layout --header option_table.h"
 end
 
 if HAVE_OPTION_TABLE
diff --git a/src/config/Options.lb b/src/config/Options.lb
index 936f9c3727..a175f358e8 100644
--- a/src/config/Options.lb
+++ b/src/config/Options.lb
@@ -117,7 +117,7 @@ define OBJCOPY
 	comment "Objcopy command"
 end
 define LINUXBIOS_VERSION
-	default "1.1.5"
+	default "1.1.6"
 	export always
 	comment "LinuxBIOS version"
 end
@@ -318,6 +318,12 @@ define CONFIG_UNCOMPRESSED
 	export always
 	comment "Set for uncompressed image"
 end
+define CONFIG_LB_MEM_TOPK
+	format "%d"
+	default 1024
+	export always
+	comment "Kilobytes of memory to initialized before executing code from RAM"
+end
 define HAVE_OPTION_TABLE
 	default 0
 	export always
@@ -331,6 +337,29 @@ define USE_OPTION_TABLE
 end
 
 ###############################################
+# CMOS variable options
+###############################################
+define LB_CKS_RANGE_START
+	default 49
+	format "%d"
+	export always
+	comment "First CMOS byte to use for LinuxBIOS options"
+end
+define LB_CKS_RANGE_END
+	default 125
+	format "%d"
+	export always
+	comment "Last CMOS byte to use for LinuxBIOS options"
+end
+define LB_CKS_LOC
+	default 126
+	format "%d"
+	export always
+	comment "Pair of bytes to use for CMOS checksum"
+end
+
+
+###############################################
 # Build targets
 ###############################################
 
@@ -427,15 +456,15 @@ define MAINBOARD_VENDOR
 	export always
 	comment "Vendor of mainboard"
 end
-define CONFIG_SYS_CLK_FREQ
+define MAINBOARD_POWER_ON_AFTER_POWER_FAIL
 	default none
 	export used
-	comment "System clock frequency in MHz"
+	comment "Default power on after power fail setting"
 end
-define CONFIG_KEYBOARD
-	default 0
+define CONFIG_SYS_CLK_FREQ
+	default none
 	export used
-	comment "Run PC keyboard enable code"
+	comment "System clock frequency in MHz"
 end
 define CONFIG_LEGACY_VGABIOS
 	default 0