diff options
author | Ronald G. Minnich <rminnich@gmail.com> | 2006-05-02 03:07:11 +0000 |
---|---|---|
committer | Ronald G. Minnich <rminnich@gmail.com> | 2006-05-02 03:07:11 +0000 |
commit | d3ba4aaa245b1af50f70443ba01ec0baf883995f (patch) | |
tree | 86ef1da57a3c72ff0c83f8429b74d13a6c1cb7b6 /src/cpu/amd/model_gx2 | |
parent | ae3cbe951b414d9c2d2338f77e00132f7251cf94 (diff) | |
download | coreboot-d3ba4aaa245b1af50f70443ba01ec0baf883995f.tar.xz |
Fall back to pre-broken settings and setup for GX2.
We lost a few things, but this is still worth it.
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2287 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/cpu/amd/model_gx2')
-rw-r--r-- | src/cpu/amd/model_gx2/cpureginit.c | 205 | ||||
-rw-r--r-- | src/cpu/amd/model_gx2/model_gx2_init.c | 5 | ||||
-rw-r--r-- | src/cpu/amd/model_gx2/syspreinit.c | 15 |
3 files changed, 124 insertions, 101 deletions
diff --git a/src/cpu/amd/model_gx2/cpureginit.c b/src/cpu/amd/model_gx2/cpureginit.c index a1f55fe762..f2802b67ca 100644 --- a/src/cpu/amd/model_gx2/cpureginit.c +++ b/src/cpu/amd/model_gx2/cpureginit.c @@ -9,8 +9,7 @@ /* **/ /* ***************************************************************************/ static void -BIST(void) -{ +BIST(void){ int msrnum; msr_t msr; @@ -25,8 +24,8 @@ BIST(void) msrnum = CPU_DM_BIST; wrmsr(msrnum, msr); - outb(POST_CPU_DM_BIST_FAILURE, 0x80); /* 0x29*/ - msr = rdmsr(msrnum); /* read back for pass fail*/ + outb(POST_CPU_DM_BIST_FAILURE , 0x80); /* 0x29*/ + msr = rdmsr(msrnum); /* read back for pass fail*/ msr.lo &= 0x0F3FF0000; if (msr.lo != 0xfeff0000) goto BISTFail; @@ -42,115 +41,108 @@ BIST(void) msrnum = CPU_FP_UROM_BIST; wrmsr(msrnum, msr); - outb(POST_CPU_FPU_BIST_FAILURE, 0x80); /* 0x89*/ - inb(0x80); /* IO delay*/ - msr = rdmsr(msrnum); /* read back for pass fail*/ + outb(POST_CPU_FPU_BIST_FAILURE, 0x80); /* 0x89*/ + inb(0x80); /* IO delay*/ + msr = rdmsr(msrnum); /* read back for pass fail*/ while ((msr.lo&0x884) != 0x884) - msr = rdmsr(msrnum); /* Endless loop if BIST is broken*/ + msr = rdmsr(msrnum); /* Endless loop if BIST is broken*/ if ((msr.lo&0x642) != 0x642) goto BISTFail; - msr.lo = msr.hi = 0; /* clear FPU BIST bits*/ + + msr.lo = msr.hi = 0; /* clear FPU BIST bits*/ msrnum = CPU_FP_UROM_BIST; wrmsr(msrnum, msr); + /* BTB*/ msr.lo = 0x000000303; msr.hi = 0x000000000; msrnum = CPU_PF_BTBRMA_BIST; wrmsr(msrnum, msr); - outb(POST_CPU_BTB_BIST_FAILURE, 0x80); /* 0x8A*/ - msr = rdmsr(msrnum); /* read back for pass fail*/ + outb(POST_CPU_BTB_BIST_FAILURE , 0x80); /* 0x8A*/ + msr = rdmsr(msrnum); /* read back for pass fail*/ if ((msr.lo & 0x3030) != 0x3030) goto BISTFail; return; + BISTFail: print_err("BIST failed!\n"); while(1); } - -void BTM_enable(void) -{ - int msrnum; - msr_t msr; - /* Set Diagnostic Mode */ - msrnum = CPU_GLD_MSR_DIAG; - msr.hi = 0; - msr.lo = DIAG_SEL1_SET | DIAG_SET0_SET; - wrmsr(msrnum, msr); - - /* Set up GLCP to grab BTM data.*/ - msrnum = 0x04C00000C; /* GLCP_DBGOUT MSR*/ - msr.hi = 0x0; - msr.lo = 0x08; /* reset value (SCOPE_SEL = 0) causes FIFO toshift out,*/ - wrmsr(msrnum, msr); /* exchange it to anything else to prevent this*/ - - /* ;Turn off debug clock*/ - msrnum = 0x04C000016; /* DBG_CLK_CTL*/ - msr.lo = 0x00; /* No clock*/ - msr.hi = 0x00; - wrmsr(msrnum, msr); - - /* ;Set debug clock to CPU*/ - msrnum = 0x04C000016; /* DBG_CLK_CTL*/ - msr.lo = 0x01; /* CPU CLOCK*/ - msr.hi = 0x00; - wrmsr(msrnum, msr); - - /* ;Set fifo ctl to BTM bits wide*/ - msrnum = 0x04C00005E; /* FIFO_CTL*/ - msr.lo = 0x003880000; /* Bit [25:24] are size (11=BTM, 10 = 64 bit, - * 01= 32 bit, 00 = 16bit), - * Bit [23:21] are position (100 = CPU downto0)*/ - wrmsr(msrnum, msr); /* */ - /* Bit [19] sets it up in slow data mode.*/ - - /* ;enable fifo loading - BTM sizing will constrain*/ - /* ; only valid BTM packets to load - this action should always be on*/ - msrnum = 0x04C00006F; /* GLCP ACTION7 - load fifo*/ - msr.lo = 0x00000F000; /* Any nibble all 1's will always trigger*/ - msr.hi = 0x000000000; /* */ - wrmsr(msrnum, msr); - - /* ;start storing diag data in the fifo*/ - msrnum = 0x04C00005F; /* DIAG CTL*/ - msr.lo = 0x080000000; /* enable actions*/ - msr.hi = 0x000000000; - wrmsr(msrnum, msr); - - /* Set up delay on data lines, so that the hold time*/ - /* is 1 ns.*/ - msrnum = 0x04C00000D ; /* GLCP IO DELAY CONTROLS*/ - msr.lo = 0x082b5ad68; - msr.hi = 0x080ad6b57; /* RGB delay = 0x07*/ - wrmsr(msrnum, msr); - - /* Set up DF to output diag information on DF pins.*/ - msrnum = DF_GLD_MSR_MASTER_CONF; - msr.lo = 0x0220; - msr.hi = 0; - wrmsr(msrnum, msr); - - msrnum = 0x04C00000C ; /* GLCP_DBGOUT MSR*/ - msr.hi = 0x0; - msr.lo = 0x0; /* reset value (SCOPE_SEL = 0) causes FIFO to shift out,*/ - wrmsr(msrnum, msr); - /* end of code for BTM */ -} - /* ***************************************************************************/ /* * cpuRegInit*/ /* ***************************************************************************/ void -cpuRegInit (void) -{ +cpuRegInit (void){ int msrnum; msr_t msr; /* Turn on BTM for early debug based on setup. */ /*if (getnvram( TOKEN_BTM_DIAG_MODE) & 3) {*/ { - BTM_enable(); + /* Set Diagnostic Mode */ + msrnum = CPU_GLD_MSR_DIAG; + msr.hi = 0; + msr.lo = DIAG_SEL1_SET | DIAG_SET0_SET; + wrmsr(msrnum, msr); + + /* Set up GLCP to grab BTM data.*/ + msrnum = 0x04C00000C; /* GLCP_DBGOUT MSR*/ + msr.hi = 0x0; + msr.lo = 0x08; /* reset value (SCOPE_SEL = 0) causes FIFO toshift out,*/ + wrmsr(msrnum, msr); /* exchange it to anything else to prevent this*/ + + /* ;Turn off debug clock*/ + msrnum = 0x04C000016; /* DBG_CLK_CTL*/ + msr.lo = 0x00; /* No clock*/ + msr.hi = 0x00; + wrmsr(msrnum, msr); + + /* ;Set debug clock to CPU*/ + msrnum = 0x04C000016; /* DBG_CLK_CTL*/ + msr.lo = 0x01; /* CPU CLOCK*/ + msr.hi = 0x00; + wrmsr(msrnum, msr); + + /* ;Set fifo ctl to BTM bits wide*/ + msrnum = 0x04C00005E; /* FIFO_CTL*/ + msr.lo = 0x003880000; /* Bit [25:24] are size (11=BTM, 10 = 64 bit, 01= 32 bit, 00 = 16bit)*/ + wrmsr(msrnum, msr); /* Bit [23:21] are position (100 = CPU downto0)*/ + /* Bit [19] sets it up in slow data mode.*/ + + /* ;enable fifo loading - BTM sizing will constrain*/ + /* ; only valid BTM packets to load - this action should always be on*/ + + msrnum = 0x04C00006F; /* GLCP ACTION7 - load fifo*/ + msr.lo = 0x00000F000; /* Any nibble all 1's will always trigger*/ + msr.hi = 0x000000000; /* */ + wrmsr(msrnum, msr); + + /* ;start storing diag data in the fifo*/ + msrnum = 0x04C00005F; /* DIAG CTL*/ + msr.lo = 0x080000000; /* enable actions*/ + msr.hi = 0x000000000; + wrmsr(msrnum, msr); + + /* Set up delay on data lines, so that the hold time*/ + /* is 1 ns.*/ + msrnum = 0x04C00000D ; /* GLCP IO DELAY CONTROLS*/ + msr.lo = 0x082b5ad68; + msr.hi = 0x080ad6b57; /* RGB delay = 0x07*/ + wrmsr(msrnum, msr); + + /* Set up DF to output diag information on DF pins.*/ + msrnum = DF_GLD_MSR_MASTER_CONF; + msr.lo = 0x0220; + msr.hi = 0; + wrmsr(msrnum, msr); + + msrnum = 0x04C00000C ; /* GLCP_DBGOUT MSR*/ + msr.hi = 0x0; + msr.lo = 0x0; /* reset value (SCOPE_SEL = 0) causes FIFO to shift out,*/ + wrmsr(msrnum, msr); + /* end of code for BTM */ } /* Enable Suspend on Halt*/ @@ -172,32 +164,49 @@ cpuRegInit (void) msr.lo = 0x00000603C; wrmsr(msrnum, msr); - /* Enable CIS mode C */ + +/* Only do this if we are building for 5535*/ +/* */ +/* FooGlue Setup*/ +/* */ +#if 1 + /* Enable CIS mode B in FooGlue*/ msrnum = MSR_FG + 0x10; msr = rdmsr(msrnum); msr.lo &= ~3; - msr.lo |= 2; + msr.lo |= 2; /* ModeB*/ wrmsr(msrnum, msr); +#endif - /* Disable DOT PLL. Graphics init will enable it if needed.*/ +/* */ +/* Disable DOT PLL. Graphics init will enable it if needed.*/ +/* */ msrnum = GLCP_DOTPLL; msr = rdmsr(msrnum); msr.lo |= DOTPPL_LOWER_PD_SET; wrmsr(msrnum, msr); - /* Enable RSDC and other SMM instructions */ +/* */ +/* Enable RSDC*/ +/* */ msrnum = 0x1301 ; msr = rdmsr(msrnum); msr.lo |= 0x08; wrmsr(msrnum, msr); - /* BIST*/ + +/* */ +/* BIST*/ +/* */ /*if (getnvram( TOKEN_BIST_ENABLE) & == TVALUE_DISABLE) {*/ { - //BIST(); +// BIST(); } - /* Enable BTB*/ + +/* */ +/* Enable BTB*/ +/* */ /* I hate to put this check here but it doesn't really work in cpubug.asm*/ msrnum = MSR_GLCP+0x17; msr = rdmsr(msrnum); @@ -208,7 +217,9 @@ cpuRegInit (void) wrmsr(msrnum, msr); } - /* FPU impercise exceptions bit*/ +/* */ +/* FPU impercise exceptions bit*/ +/* */ /*if (getnvram( TOKEN_FPU_IE_ENABLE) != TVALUE_DISABLE) {*/ { msrnum = CPU_FPU_MSR_MODE; @@ -217,7 +228,9 @@ cpuRegInit (void) wrmsr(msrnum, msr); } - /* Cache Overides*/ +/* */ +/* Cache Overides*/ +/* */ /* Allow NVRam to override DM Setup*/ /*if (getnvram( TOKEN_CACHE_DM_MODE) != 1) {*/ { @@ -237,6 +250,9 @@ cpuRegInit (void) } } + + + /* ***************************************************************************/ /* **/ /* * MTestPinCheckBX*/ @@ -246,8 +262,7 @@ cpuRegInit (void) /* **/ /* ***************************************************************************/ static void -MTestPinCheckBX (void) -{ +MTestPinCheckBX (void){ int msrnum; msr_t msr; diff --git a/src/cpu/amd/model_gx2/model_gx2_init.c b/src/cpu/amd/model_gx2/model_gx2_init.c index d534f530c7..c6ad683ff8 100644 --- a/src/cpu/amd/model_gx2/model_gx2_init.c +++ b/src/cpu/amd/model_gx2/model_gx2_init.c @@ -12,7 +12,6 @@ static void vsm_end_post_smi(void) __asm__ volatile ( "push %ax\n" "mov $0x5000, %ax\n" - /* smint */ ".byte 0x0f, 0x38\n" "pop %ax\n" ); @@ -25,7 +24,9 @@ static void model_gx2_init(device_t dev) /* Turn on caching if we haven't already */ x86_enable_cache(); - /* send SYS_END_OF_POST to VSM */ + /* Enable the local cpu apics */ + //setup_lapic(); + vsm_end_post_smi(); printk_debug("model_gx2_init DONE\n"); diff --git a/src/cpu/amd/model_gx2/syspreinit.c b/src/cpu/amd/model_gx2/syspreinit.c index d411510866..e3ad95235d 100644 --- a/src/cpu/amd/model_gx2/syspreinit.c +++ b/src/cpu/amd/model_gx2/syspreinit.c @@ -1,13 +1,20 @@ +/* ***************************************************************************/ +/* **/ +/* * StartTimer1*/ +/* **/ +/* * Entry: none*/ +/* * Exit: Starts Timer 1 for port 61 use*/ +/* * Destroys: Al,*/ +/* **/ +/* ***************************************************************************/ void -StartTimer1(void) -{ +StartTimer1(void){ outb(0x56, 0x43); outb(0x12, 0x41); } void -SystemPreInit(void) -{ +SystemPreInit(void){ /* they want a jump ... */ __asm__("jmp .+2\ninvd\njmp.+2\n"); |