diff options
author | Ronald G. Minnich <rminnich@gmail.com> | 2007-10-26 14:57:46 +0000 |
---|---|---|
committer | Ronald G. Minnich <rminnich@gmail.com> | 2007-10-26 14:57:46 +0000 |
commit | 65bc460e01c22cf0f347903735d0860756dc0777 (patch) | |
tree | 1f27bee56e7ac3fbfa522623d36d6c11c218f1eb /src/cpu/amd/model_lx | |
parent | 3d02e1e0d813eb4d986d26b5f4e98e5c12d46ea6 (diff) | |
download | coreboot-65bc460e01c22cf0f347903735d0860756dc0777.tar.xz |
This code gets us to a working linux boot on the alix1c. I have not tested
Ethernet yet. The fixes are a board-specific fake spd_read_byte, cleaning up
comments, and just in general customizing for the 1c.
The lxraminit
change fixes a bug (&& used instead of ||), adds some debug prints which were
VERY useful debugging the alix1c, changes fatal error messages from print_debug
to print_emerg, and adds two functions:
banner, which just prints out a string with a banner, and
hcf, which print an emergency message and then pushes null bytes
into the uart forever, just to make sure that no bytes get lost
for any reason.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2899 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/cpu/amd/model_lx')
-rw-r--r-- | src/cpu/amd/model_lx/cpureginit.c | 19 |
1 files changed, 18 insertions, 1 deletions
diff --git a/src/cpu/amd/model_lx/cpureginit.c b/src/cpu/amd/model_lx/cpureginit.c index ef5a8b9d94..930762704e 100644 --- a/src/cpu/amd/model_lx/cpureginit.c +++ b/src/cpu/amd/model_lx/cpureginit.c @@ -205,7 +205,13 @@ void SetDelayControl(void) } } } + print_debug("Try to write GLCP_DELAY_CONTROLS: hi "); + print_debug_hex32(msr.hi); + print_debug(" and lo "); + print_debug_hex32(msr.lo); + print_debug("\r\n"); wrmsr(GLCP_DELAY_CONTROLS, msr); + print_debug("SetDelayControl done\r\n"); return; } @@ -219,6 +225,7 @@ void cpuRegInit(void) /* Castle 2.0 BTM periodic sync period. */ /* [40:37] 1 sync record per 256 bytes */ + print_debug("Castle 2.0 BTM periodic sync period.\r\n"); msrnum = CPU_PF_CONF; msr = rdmsr(msrnum); msr.hi |= (0x8 << 5); @@ -228,6 +235,7 @@ void cpuRegInit(void) * LX performance setting. * Enable Quack for fewer re-RAS on the MC */ + print_debug("Enable Quack for fewer re-RAS on the MC\r\n"); msrnum = GLIU0_ARB; msr = rdmsr(msrnum); msr.hi &= ~ARB_UPPER_DACK_EN_SET; @@ -240,22 +248,28 @@ void cpuRegInit(void) msr.hi |= ARB_UPPER_QUACK_EN_SET; wrmsr(msrnum, msr); - /* GLIU port active enable, limit south pole masters (AES and PCI) to one outstanding transaction. */ + /* GLIU port active enable, limit south pole masters + * (AES and PCI) to one outstanding transaction. + */ + print_debug(" GLIU port active enable\r\n"); msrnum = GLIU1_PORT_ACTIVE; msr = rdmsr(msrnum); msr.lo &= ~0x880; wrmsr(msrnum, msr); /* Set the Delay Control in GLCP */ + print_debug("Set the Delay Control in GLCP\r\n"); SetDelayControl(); /* Enable RSDC */ + print_debug("Enable RSDC\r\n"); msrnum = CPU_AC_SMM_CTL; msr = rdmsr(msrnum); msr.lo |= SMM_INST_EN_SET; wrmsr(msrnum, msr); /* FPU imprecise exceptions bit */ + print_debug("FPU imprecise exceptions bit\r\n"); msrnum = CPU_FPU_MSR_MODE; msr = rdmsr(msrnum); msr.lo |= FPU_IE_SET; @@ -263,12 +277,14 @@ void cpuRegInit(void) /* Power Savers (Do after BIST) */ /* Enable Suspend on HLT & PAUSE instructions */ + print_debug("Enable Suspend on HLT & PAUSE instructions\r\n"); msrnum = CPU_XC_CONFIG; msr = rdmsr(msrnum); msr.lo |= XC_CONFIG_SUSP_ON_HLT | XC_CONFIG_SUSP_ON_PAUSE; wrmsr(msrnum, msr); /* Enable SUSP and allow TSC to run in Suspend (keep speed detection happy) */ + print_debug("Enable SUSP and allow TSC to run in Suspend\r\n"); msrnum = CPU_BC_CONF_0; msr = rdmsr(msrnum); msr.lo |= TSC_SUSP_SET | SUSP_EN_SET; @@ -286,6 +302,7 @@ void cpuRegInit(void) #endif /* Setup throttling delays to proper mode if it is ever enabled. */ + print_debug("Setup throttling delays to proper mode\r\n"); msrnum = GLCP_TH_OD; msr.hi = 0; msr.lo = 0x00000603C; |