diff options
author | Marc Jones <marc.jones@amd.com> | 2008-11-03 21:39:03 +0000 |
---|---|---|
committer | Marc Jones <marc.jones@amd.com> | 2008-11-03 21:39:03 +0000 |
commit | c87ddd91c7b4f50d5d2dd4e8b0370b50d62a7367 (patch) | |
tree | d8477a114ab146565ca4ae443f04ee12a52422b0 /src/cpu/amd | |
parent | fbeba2313f104b0dd329fc30bfc5e6182b85cda0 (diff) | |
download | coreboot-c87ddd91c7b4f50d5d2dd4e8b0370b50d62a7367.tar.xz |
Update K8 FID/VID setup. Add support for 100MHz FIDs (revG).
Signed-off-by: Marc Jones <marc.jones@amd.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3726 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/cpu/amd')
-rw-r--r-- | src/cpu/amd/model_fxx/fidvid.c | 188 |
1 files changed, 135 insertions, 53 deletions
diff --git a/src/cpu/amd/model_fxx/fidvid.c b/src/cpu/amd/model_fxx/fidvid.c index 22ade3a4fd..2ed47dff3a 100644 --- a/src/cpu/amd/model_fxx/fidvid.c +++ b/src/cpu/amd/model_fxx/fidvid.c @@ -97,36 +97,43 @@ static unsigned set_fidvid_without_init(unsigned fidvid) } #endif -static unsigned set_fidvid(unsigned apicid, unsigned fidvid, int showmessage) +static u32 set_fidvid(unsigned apicid, unsigned fidvid, int showmessage) { - /* for (cur, new) there is one <1600MHz x8 to find out next_fid */ - static const uint8_t next_fid_a[] = { - /* x4 x5 x6 x7 x8 x9 x10 x11 x12 x13 x14 x15 */ -/* x4 */ 0, 9, 9, 8, 9, 9, 9, 9, 9, 9, 9, 9, -/* x5 */ 9, 0, 11, 11, 9, 9, 10, 11, 11, 11, 11, 11, -/* x6 */ 11, 11, 0, 13, 11, 11, 11, 11, 12, 13, 13, 13, -/* x7 */ 13, 13, 13, 0, 13, 13, 13, 13, 13, 13, 14, 15, -/* x8 */ 4, 9, 9, 9, 0, 9, 9, 9, 9, 9, 9, 9, -/* x9 */ 4, 5, 10, 10, 8, 0, 0, 0, 0, 0, 0, 0, -/*x10 */ 9, 5, 11, 11, 9, 0, 0, 0, 0, 0, 0, 0, -/*x11 */ 10, 5, 6, 12, 10, 0, 0, 0, 0, 0, 0, 0, -/*x12 */ 11, 11, 6, 13, 11, 0, 0, 0, 0, 0, 0, 0, -/*x13 */ 12, 12, 6, 7, 12, 0, 0, 0, 0, 0, 0, 0, -/*x14 */ 13, 13, 13, 7, 13, 0, 0, 0, 0, 0, 0, 0, -/*x15 */ 14, 14, 14, 7, 14, 0, 0, 0, 0, 0, 0, 0, -/* 0:x4, 2:x5....BASE=4, MIN=4, MAX=25, INC=2 result = (xX-BASE)*INC */ + +/* CurrentFID--> 4x(00h) 5x(02h) 6x(04h) 7x(06h) ... + * -------------------------------------- + * TargetFID | Next_FID, Next_FID, Next_FID, Next_FID ... + * | | Next_FID, Next_FID, Next_FID, Next_FID ... + * \|/ | Next_FID, Next_FID, Next_FID, Next_FID ... + */ + static const u8 next_fid_200[] = { +/* x4 x5 x6 x7 x8 x9 x10 x11 x12 x13 x14 x15 x16 */ +/* x4 */ 0, -1, -1, -1, 0, 0, 9, 10, 11, 12, 13, 14, 15, /* 800 */ +/* x5 */ -1, 0, -1, -1, -1, 5, 5, 5, 11, 12, 13, 14, 15, /* 1000 */ +/* x6 */ -1, -1, 0, -1, -1, -1, -1, 6, 6, 6, 13, 14, 15, /* 1200 */ +/* x7 */ -1, -1, -1, 0, -1, -1, -1, -1, -1, 7, 7, 7, 15, /* 1400 */ +/* lower table to upper table boarder (table 70 and 71 in BKDG) */ +/* x8 */ 8, -1, -1, -1, 0, 8, 9, 10, 11, 12, 13, 14, 15, /* 1600 */ +/* x9 */ 9, 9, -1, -1, 9, 0, 9, 10, 11, 12, 13, 14, 15, /* 1800 */ +/*x10 */ 9, 10, -1, -1, 9, 10, 0, 10, 11, 12, 13, 14, 15, /* 2000 */ +/*x11 */ 9, 11, 11, -1, 9, 10, 11, 0, 11, 12, 13, 14, 15, /* 2200 */ +/*x12 */ 9, 11, 12, -1, 9, 10, 11, 12, 0, 12, 13, 14, 15, /* 2400 */ +/*x13 */ 9, 11, 13, 13, 9, 10, 11, 12, 13, 0, 13, 14, 15, /* 2600 */ +/*x14 */ 9, 11, 13, 14, 9, 10, 11, 12, 13, 14, 0, 14, 15, /* 2800 */ +/*x15 */ 9, 11, 13, 15, 9, 10, 11, 12, 13, 14, 15, 0, 15, /* 3000 */ +/*x15 */ 9, 11, 13, 15, 9, 10, 11, 12, 13, 14, 15, 16, 0, /* 3200 */ }; msr_t msr; - uint32_t vid; - uint32_t fid; + uint32_t vid_new; + uint32_t fid_new; uint32_t vid_max; uint32_t fid_max; uint32_t vid_cur; uint32_t fid_cur; unsigned apicidx; - int steps; + int step_limit; int loop; apicidx = lapicid(); @@ -140,21 +147,22 @@ static unsigned set_fidvid(unsigned apicid, unsigned fidvid, int showmessage) return fidvid; } - fid = (fidvid >> 8) & 0x3f; - vid = (fidvid >> 16) & 0x3f; + fid_new = (fidvid >> 8) & 0x3f; + vid_new = (fidvid >> 16) & 0x3f; msr = rdmsr(0xc0010042); vid_cur = msr.hi & 0x3f; fid_cur = msr.lo & 0x3f; - if ((vid_cur==vid) && (fid_cur==fid)) + if ((vid_cur == vid_new) && (fid_cur == fid_new)) return fidvid; - vid_max = (msr.hi>>(48-32)) & 0x3f; - fid_max = ((msr.lo>>16) & 0x3f); /* max fid */ + vid_max = (msr.hi >> (48-32)) & 0x3f; + fid_max = ((msr.lo >> 16) & 0x3f); /* max fid */ + #if FX_SUPPORT - if (fid_max>=((25-4)*2)) { /* FX max fid is 5G */ + if (fid_max >= ((25 - 4) * 2)) { /* FX max fid is 5G */ fid_max = ((msr.lo >> 8) & 0x3f) + 5 * 2; /* max FID is min fid + 1G */ if (fid_max >= ((25-4) * 2)) { fid_max = (10-4) * 2; /* hard set to 2G */ @@ -163,10 +171,20 @@ static unsigned set_fidvid(unsigned apicid, unsigned fidvid, int showmessage) #endif /* set vid to max */ + /* TODO - make this more correct. Not a big deal for setting max... + * BKDG figure 11 + * if TargetFID > InitialFID + * TargetVID = FinalVID - RVO + * else + * if CurrentVID > FinalVID + * TargetVID = FinalVID - RVO + * else + * TargetVID = CurrentVIDD - RVO + */ msr.hi = 1; msr.lo = (vid_max << 8) | (fid_cur); #if SB_VFSMAF == 1 - msr.lo |= (1<<16); /* init changes */ + msr.lo |= (1 << 16); /* init changes */ #endif wrmsr(0xc0010041, msr); #if SB_VFSMAF == 0 @@ -174,38 +192,92 @@ static unsigned set_fidvid(unsigned apicid, unsigned fidvid, int showmessage) #endif - for (loop=0;loop<100000;loop++){ + for (loop=0; loop < 100000; loop++){ msr = rdmsr(0xc0010042); - if (!(msr.lo & (1<<31))) + if (!(msr.lo & (1 << 31))) break; } vid_cur = msr.hi & 0x3f; - steps = 8; //?? - while ((fid_cur != fid) && (steps-- > 0)) { - uint32_t fid_temp; - if ((fid_cur > (8-4)*2) && (fid> (8-4)*2)) { - if (fid_cur<fid) { + /* BKDG figure 12 and 13 + * if current fid is odd + * current fid -1 (next lower and even fid)(odd fid for rev G) + * if current fid in high-freq table + * while current fid < target fid + * transition to next higher fid in table + * else if target fid > VCO portal of current fid + * transition to highest portal fid in higher fid table + * while current fid < target fid + * transition to next higher fid in table + * else + * transition to target fid + */ + + printk_debug("Current fid_cur: 0x%x, fid_max: 0x%x\n", fid_cur, fid_max); + printk_debug("Requested fid_new: 0x%x\n", fid_new); + + step_limit = 8; /* max 8 steps just in case... */ + while ((fid_cur != fid_new) && (step_limit--)) { + u32 fid_temp; + int step; + + if (fid_cur < fid_new) + /* Force Fid steps even. step == 0 means 100MHz step */ + step = ((fid_new/2) - (fid_cur/2)) * 2; + else + step = ((fid_cur/2) - (fid_new/2)) * 2; + + /* If 200Mhz step OR past 3200 max table value */ + if ((step == 2) || (fid_new >= 0x18 || fid_cur >= 0x18)) { + + printk_debug("200MHZ step "); + + /* Step +/- 200MHz at a time */ + if (fid_cur < fid_new) fid_temp = fid_cur + 2; - } else { - fid_temp = fid_cur - 2; - } - } else { - /* there is one < 8, So we need to lookup the table to - * find the fid_cur */ + else + fid_temp = fid_cur - 2; + + + } else if ( step > 2) { /* If more than a 200Mhz step */ int temp; - temp = next_fid_a[(fid_cur/2)*12+(fid/2)]; - if (temp <= 0) break; - fid_temp = (temp-4) * 2; + + /* look it up in the table */ + printk_debug("FidVid table step "); + + temp = next_fid_200[((fid_new/2) * 13) + (fid_cur/2)]; + + if (temp > 0) + fid_temp = (temp-4) * 2; /* Table 108 */ + else if (temp == 0) + fid_temp = fid_new; + else + break; /* table error */ + + } else { /* step < 2 (100MHZ) */ + printk_debug("100MHZ step "); + + /* The table adjust in 200MHz increments. If requested, + * do the 100MHz increment if the CPU supports it.*/ + if (cpuid_edx(0x80000007) & (1 << 6)) { + fid_temp = fid_cur + 1; + } else { + /* 100 MHZ not supported. Get out of the loop */ + printk_debug("is not supported.\n"); + break; + } } - if (fid_temp > fid_max) + + if(fid_temp > fid_max) { + printk_debug("fid_temp 0x%x > fid_max 0x%x\n", fid_temp, fid_max); break; + } - fid_cur = fid_temp; + printk_debug("fidvid: 0x%x\n", fid_temp); /* set target fid */ - msr.hi = (100000/5); - msr.lo = (vid_cur << 8) | fid_cur; + msr.hi = 0x190; /* 2 us for AMD NPT Family 0Fh Processors */ + msr.lo = (vid_cur << 8) | fid_temp; #if SB_VFSMAF == 1 msr.lo |= (1 << 16); /* init changes */ #endif @@ -217,8 +289,8 @@ static unsigned set_fidvid(unsigned apicid, unsigned fidvid, int showmessage) #if K8_SET_FIDVID_DEBUG == 1 if (showmessage) { - print_debug_fv_8("\tapicid in set_fidvid = ", apicid); - print_debug_fv_64("ctrl msr fid, vid ", msr.hi, msr.lo); + print_debug_fv_8("set_fidvid APICID = ", apicid); + print_debug_fv_64("fidvid ctrl msr ", msr.hi, msr.lo); } #endif @@ -231,14 +303,24 @@ static unsigned set_fidvid(unsigned apicid, unsigned fidvid, int showmessage) #if K8_SET_FIDVID_DEBUG == 1 if (showmessage) { - print_debug_fv_64("status msr fid, vid ", msr.hi, msr.lo); + print_debug_fv_64("fidvid status msr ", msr.hi, msr.lo); } #endif } /* set vid to final */ + /* TODO - make this more correct. Not a big deal for setting max... + * BKDG figure 11 + * if TargetFID > InitialFID + * TargetVID = FinalVID - RVO + * else + * if CurrentVID > FinalVID + * TargetVID = FinalVID - RVO + * else + * TargetVID = CurrentVIDD - RVO + */ msr.hi = 1; - msr.lo = (vid << 8) | (fid_cur); + msr.lo = (vid_new << 8) | (fid_cur); #if SB_VFSMAF == 1 msr.lo |= (1 << 16); // init changes #endif @@ -257,10 +339,10 @@ static unsigned set_fidvid(unsigned apicid, unsigned fidvid, int showmessage) fidvid = (vid_cur << 16) | (fid_cur << 8); if (showmessage) { - if (vid!=vid_cur) { + if (vid_new != vid_cur) { print_err("set vid failed for apicid ="); print_err_hex8(apicidx); print_err("\r\n"); } - if (fid!=fid_cur) { + if (fid_new != fid_cur) { print_err("set fid failed for apicid ="); print_err_hex8(apicidx); print_err("\r\n"); } } |