ARMv7: De-uboot-ify Exynos5250 code

When starting the Exynos5250 port, a lot of unneeded u-boot code
was imported. This is an attempt to get rid of a lot of unneeded
code before the port is used as a basis for further ARM ports.

There is a lot more that can be done, including cleaning up the
5250's Kconfig file.

Change-Id: I2d88676c436eea4b21bcb62f40018af9fabb3016
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Signed-off-by: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/3642
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>

1 files changed, 4 insertions, 12 deletions

diff --git a/src/cpu/samsung/exynos5250/Makefile.inc b/src/cpu/samsung/exynos5250/Makefile.inc
index 6227b2a44a..dcc783dc2e 100644
--- a/src/cpu/samsung/exynos5250/Makefile.inc
+++ b/src/cpu/samsung/exynos5250/Makefile.inc
@@ -9,7 +9,6 @@ bootblock-y += pinmux.c mct.c power.c
 bootblock-$(CONFIG_EARLY_CONSOLE) += clock_init.c
 bootblock-$(CONFIG_EARLY_CONSOLE) += clock.c
 bootblock-$(CONFIG_EARLY_CONSOLE) += monotonic_timer.c
-bootblock-$(CONFIG_EARLY_CONSOLE) += soc.c
 bootblock-$(CONFIG_EARLY_CONSOLE) += uart.c
 bootblock-y += wakeup.c
 bootblock-y += gpio.c
@@ -19,13 +18,12 @@ bootblock-$(CONFIG_EARLY_CONSOLE) += timer.c
 romstage-y += spi.c
 romstage-y += clock.c
 romstage-y += clock_init.c
-romstage-y += pinmux.c  # required by s3c24x0_i2c (exynos5-common) and uart.
+romstage-y += pinmux.c  # required by s3c24x0_i2c and uart.
 romstage-y += dmc_common.c
 romstage-y += dmc_init_ddr3.c
 romstage-y += power.c
 romstage-y += mct.c
 romstage-y += monotonic_timer.c
-romstage-$(CONFIG_EARLY_CONSOLE) += soc.c
 romstage-$(CONFIG_EARLY_CONSOLE) += uart.c
 romstage-y += wakeup.c
 romstage-y += pwm.c	# needed by timer.c
@@ -33,29 +31,23 @@ romstage-y += gpio.c
 romstage-y += timer.c
 romstage-y += i2c.c
 #romstage-y += wdt.c
-#romstage-y += sromc.c
 
 ramstage-y += spi.c
-#ramstage-y += tzpc_init.c
 ramstage-y += clock.c
 ramstage-y += clock_init.c
 ramstage-y += pinmux.c
 ramstage-y += power.c
-ramstage-y += soc.c
 ramstage-$(CONFIG_CONSOLE_SERIAL_UART) += uart.c
 ramstage-y += cpu.c
-ramstage-y += exynos5250-tmu.c
+ramstage-y += tmu.c
 ramstage-y += mct.c
 ramstage-y += monotonic_timer.c
-#ramstage-$(CONFIG_SATA_AHCI) += sata.c
-ramstage-y += cpu_info.c
 ramstage-y += pwm.c	# needed by timer.c
 ramstage-y += timer.c
 ramstage-y += gpio.c
 ramstage-y += i2c.c
-ramstage-y += s5p-dp-reg.c
-ramstage-y += exynos-fb.c
-ramstage-y += exynos-tmu.c
+ramstage-y += dp-reg.c
+ramstage-y += fb.c
 
 exynos5250_add_bl1: $(obj)/coreboot.pre
 	printf "    DD         Adding Samsung Exynos5250 BL1\n"