armv7: Move Exynos from 'cpu' to 'soc'.

The Exynos family and most ARM products are SoC, not just CPU.

We used to put ARM code in src/cpu to avoid polluting the code base for what was
essentially an experiment at the time. Now that it's past the experimental phase
and we're going to see more SoCs (including intel/baytrail) in coreboot.

Change-Id: I5ea1f822664244edf5f77087bc8018d7c535f81c
Reviewed-on: https://chromium-review.googlesource.com/170891
Tested-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit c8bb8fe0b20be37465f93c738d80e7e43033670a)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6739
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>

1 files changed, 0 insertions, 677 deletions

diff --git a/src/cpu/samsung/exynos5250/clock.c b/src/cpu/samsung/exynos5250/clock.c
deleted file mode 100644
index 8a731be2a3..0000000000
--- a/src/cpu/samsung/exynos5250/clock.c
+++ /dev/null
@@ -1,677 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Samsung Electronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <assert.h>
-#include <stdlib.h>
-#include <arch/io.h>
-#include <console/console.h>
-#include "clk.h"
-#include "periph.h"
-#include "timer.h"
-
-/* input clock of PLL: SMDK5250 has 24MHz input clock */
-#define CONFIG_SYS_CLK_FREQ            24000000
-
-static struct arm_clk_ratios arm_clk_ratios[] = {
-	{
-		.arm_freq_mhz = 600,
-
-		.apll_mdiv = 0xc8,
-		.apll_pdiv = 0x4,
-		.apll_sdiv = 0x1,
-
-		.arm2_ratio = 0x0,
-		.apll_ratio = 0x1,
-		.pclk_dbg_ratio = 0x1,
-		.atb_ratio = 0x2,
-		.periph_ratio = 0x7,
-		.acp_ratio = 0x7,
-		.cpud_ratio = 0x1,
-		.arm_ratio = 0x0,
-	}, {
-		.arm_freq_mhz = 800,
-
-		.apll_mdiv = 0x64,
-		.apll_pdiv = 0x3,
-		.apll_sdiv = 0x0,
-
-		.arm2_ratio = 0x0,
-		.apll_ratio = 0x1,
-		.pclk_dbg_ratio = 0x1,
-		.atb_ratio = 0x3,
-		.periph_ratio = 0x7,
-		.acp_ratio = 0x7,
-		.cpud_ratio = 0x2,
-		.arm_ratio = 0x0,
-	}, {
-		.arm_freq_mhz = 1000,
-
-		.apll_mdiv = 0x7d,
-		.apll_pdiv = 0x3,
-		.apll_sdiv = 0x0,
-
-		.arm2_ratio = 0x0,
-		.apll_ratio = 0x1,
-		.pclk_dbg_ratio = 0x1,
-		.atb_ratio = 0x4,
-		.periph_ratio = 0x7,
-		.acp_ratio = 0x7,
-		.cpud_ratio = 0x2,
-		.arm_ratio = 0x0,
-	}, {
-		.arm_freq_mhz = 1200,
-
-		.apll_mdiv = 0x96,
-		.apll_pdiv = 0x3,
-		.apll_sdiv = 0x0,
-
-		.arm2_ratio = 0x0,
-		.apll_ratio = 0x3,
-		.pclk_dbg_ratio = 0x1,
-		.atb_ratio = 0x5,
-		.periph_ratio = 0x7,
-		.acp_ratio = 0x7,
-		.cpud_ratio = 0x3,
-		.arm_ratio = 0x0,
-	}, {
-		.arm_freq_mhz = 1400,
-
-		.apll_mdiv = 0xaf,
-		.apll_pdiv = 0x3,
-		.apll_sdiv = 0x0,
-
-		.arm2_ratio = 0x0,
-		.apll_ratio = 0x3,
-		.pclk_dbg_ratio = 0x1,
-		.atb_ratio = 0x6,
-		.periph_ratio = 0x7,
-		.acp_ratio = 0x7,
-		.cpud_ratio = 0x3,
-		.arm_ratio = 0x0,
-	}, {
-		.arm_freq_mhz = 1700,
-
-		.apll_mdiv = 0x1a9,
-		.apll_pdiv = 0x6,
-		.apll_sdiv = 0x0,
-
-		.arm2_ratio = 0x0,
-		.apll_ratio = 0x3,
-		.pclk_dbg_ratio = 0x1,
-		.atb_ratio = 0x6,
-		.periph_ratio = 0x7,
-		.acp_ratio = 0x7,
-		.cpud_ratio = 0x3,
-		.arm_ratio = 0x0,
-	}
-};
-
-/* src_bit div_bit prediv_bit */
-static struct clk_bit_info clk_bit_info[PERIPH_ID_COUNT] = {
-	{0,	4,	0,	-1},
-	{4,	4,	4,	-1},
-	{8,	4,	8,	-1},
-	{12,	4,	12,	-1},
-	{0,	4,	0,	8},
-	{4,	4,	16,	24},
-	{8,	4,	0,	8},
-	{12,	4,	16,	24},
-	{-1,	-1,	-1,	-1},
-	{16,	4,	0,	8}, /* PERIPH_ID_SROMC */
-	{20,	4,	16,	24},
-	{24,	4,	0,	8},
-	{0,	4,	0,	4},
-	{4,	4,	12,	16},
-	{-1,	4,	-1,	-1},
-	{-1,	4,	-1,	-1},
-	{-1,	4,	24,	0},
-	{-1,	4,	24,	0},
-	{-1,	4,	24,	0},
-	{-1,	4,	24,	0},
-	{-1,	4,	24,	0},
-	{-1,	4,	24,	0},
-	{-1,	4,	24,	0},
-	{-1,	4,	24,	0},
-	{24,	4,	0,	-1},
-	{24,	4,	0,	-1},
-	{24,	4,	0,	-1},
-	{24,	4,	0,	-1},
-	{24,	4,	0,	-1},
-	{-1,	-1,	-1,	-1},
-	{-1,	-1,	-1,	-1},
-	{-1,	-1,	-1,	-1}, /* PERIPH_ID_I2S1 */
-	{24,	1,	20,	-1}, /* PERIPH_ID_SATA */
-};
-
-/* Epll Clock division values to achieve different frequency output */
-static struct st_epll_con_val epll_div[] = {
-	{ 192000000, 0, 48, 3, 1, 0 },
-	{ 180000000, 0, 45, 3, 1, 0 },
-	{  73728000, 1, 73, 3, 3, 47710 },
-	{  67737600, 1, 90, 4, 3, 20762 },
-	{  49152000, 0, 49, 3, 3, 9961 },
-	{  45158400, 0, 45, 3, 3, 10381 },
-	{ 180633600, 0, 45, 3, 1, 10381 }
-};
-
-/* exynos5: return pll clock frequency */
-unsigned long get_pll_clk(int pllreg)
-{
-	unsigned long r, m, p, s, k = 0, mask, fout;
-	unsigned int freq;
-
-	switch (pllreg) {
-	case APLL:
-		r = readl(&exynos_clock->apll_con0);
-		break;
-	case BPLL:
-		r = readl(&exynos_clock->bpll_con0);
-		break;
-	case MPLL:
-		r = readl(&exynos_clock->mpll_con0);
-		break;
-	case EPLL:
-		r = readl(&exynos_clock->epll_con0);
-		k = readl(&exynos_clock->epll_con1);
-		break;
-	case VPLL:
-		r = readl(&exynos_clock->vpll_con0);
-		k = readl(&exynos_clock->vpll_con1);
-		break;
-	default:
-		printk(BIOS_DEBUG, "Unsupported PLL (%d)\n", pllreg);
-		return 0;
-	}
-
-	/*
-	 * APLL_CON: MIDV [25:16]
-	 * MPLL_CON: MIDV [25:16]
-	 * EPLL_CON: MIDV [24:16]
-	 * VPLL_CON: MIDV [24:16]
-	 */
-	if (pllreg == APLL || pllreg == BPLL || pllreg == MPLL)
-		mask = 0x3ff;
-	else
-		mask = 0x1ff;
-
-	m = (r >> 16) & mask;
-
-	/* PDIV [13:8] */
-	p = (r >> 8) & 0x3f;
-	/* SDIV [2:0] */
-	s = r & 0x7;
-
-	freq = CONFIG_SYS_CLK_FREQ;
-
-	if (pllreg == EPLL) {
-		k = k & 0xffff;
-		/* FOUT = (MDIV + K / 65536) * FIN / (PDIV * 2^SDIV) */
-		fout = (m + k / 65536) * (freq / (p * (1 << s)));
-	} else if (pllreg == VPLL) {
-		k = k & 0xfff;
-		/* FOUT = (MDIV + K / 1024) * FIN / (PDIV * 2^SDIV) */
-		fout = (m + k / 1024) * (freq / (p * (1 << s)));
-	} else {
-		/* FOUT = MDIV * FIN / (PDIV * 2^SDIV) */
-		fout = m * (freq / (p * (1 << s)));
-	}
-
-	return fout;
-}
-
-unsigned long clock_get_periph_rate(enum periph_id peripheral)
-{
-	struct clk_bit_info *bit_info = &clk_bit_info[peripheral];
-	unsigned long sclk, sub_clk;
-	unsigned int src, div, sub_div;
-
-	switch (peripheral) {
-	case PERIPH_ID_UART0:
-	case PERIPH_ID_UART1:
-	case PERIPH_ID_UART2:
-	case PERIPH_ID_UART3:
-		src = readl(&exynos_clock->src_peric0);
-		div = readl(&exynos_clock->div_peric0);
-		break;
-	case PERIPH_ID_PWM0:
-	case PERIPH_ID_PWM1:
-	case PERIPH_ID_PWM2:
-	case PERIPH_ID_PWM3:
-	case PERIPH_ID_PWM4:
-		src = readl(&exynos_clock->src_peric0);
-		div = readl(&exynos_clock->div_peric3);
-		break;
-	case PERIPH_ID_SPI0:
-	case PERIPH_ID_SPI1:
-		src = readl(&exynos_clock->src_peric1);
-		div = readl(&exynos_clock->div_peric1);
-		break;
-	case PERIPH_ID_SPI2:
-		src = readl(&exynos_clock->src_peric1);
-		div = readl(&exynos_clock->div_peric2);
-		break;
-	case PERIPH_ID_SPI3:
-	case PERIPH_ID_SPI4:
-		src = readl(&exynos_clock->sclk_src_isp);
-		div = readl(&exynos_clock->sclk_div_isp);
-		break;
-	case PERIPH_ID_SATA:
-		src = readl(&exynos_clock->src_fsys);
-		div = readl(&exynos_clock->div_fsys0);
-		break;
-	case PERIPH_ID_SDMMC0:
-	case PERIPH_ID_SDMMC1:
-	case PERIPH_ID_SDMMC2:
-	case PERIPH_ID_SDMMC3:
-		src = readl(&exynos_clock->src_fsys);
-		div = readl(&exynos_clock->div_fsys1);
-		break;
-	case PERIPH_ID_I2C0:
-	case PERIPH_ID_I2C1:
-	case PERIPH_ID_I2C2:
-	case PERIPH_ID_I2C3:
-	case PERIPH_ID_I2C4:
-	case PERIPH_ID_I2C5:
-	case PERIPH_ID_I2C6:
-	case PERIPH_ID_I2C7:
-		sclk = get_pll_clk(MPLL);
-		sub_div = ((readl(&exynos_clock->div_top1)
-			    >> bit_info->div_bit) & 0x7) + 1;
-		div = ((readl(&exynos_clock->div_top0)
-		        >> bit_info->prediv_bit) & 0x7) + 1;
-		return (sclk / sub_div) / div;
-	default:
-		printk(BIOS_DEBUG, "%s: invalid peripheral %d", __func__, peripheral);
-		return -1;
-	};
-
-	src = (src >> bit_info->src_bit) & ((1 << bit_info->n_src_bits) - 1);
-	if (peripheral == PERIPH_ID_SATA) {
-		if (src)
-			sclk = get_pll_clk(BPLL);
-		else
-			sclk = get_pll_clk(MPLL);
-	} else {
-		if (src == SRC_MPLL)
-			sclk = get_pll_clk(MPLL);
-		else if (src == SRC_EPLL)
-			sclk = get_pll_clk(EPLL);
-		else if (src == SRC_VPLL)
-			sclk = get_pll_clk(VPLL);
-		else
-			return 0;
-	}
-
-	sub_div = (div >> bit_info->div_bit) & 0xf;
-	sub_clk = sclk / (sub_div + 1);
-
-	if (peripheral == PERIPH_ID_SDMMC0 || peripheral == PERIPH_ID_SDMMC2) {
-		div = (div >> bit_info->prediv_bit) & 0xff;
-		return sub_clk / (div + 1);
-	}
-
-	return sub_clk;
-}
-
-/* exynos5: return ARM clock frequency */
-unsigned long get_arm_clk(void)
-{
-	unsigned long div;
-	unsigned long armclk;
-	unsigned int arm_ratio;
-	unsigned int arm2_ratio;
-
-	div = readl(&exynos_clock->div_cpu0);
-
-	/* ARM_RATIO: [2:0], ARM2_RATIO: [30:28] */
-	arm_ratio = (div >> 0) & 0x7;
-	arm2_ratio = (div >> 28) & 0x7;
-
-	armclk = get_pll_clk(APLL) / (arm_ratio + 1);
-	armclk /= (arm2_ratio + 1);
-
-	return armclk;
-}
-
-struct arm_clk_ratios *get_arm_clk_ratios(void)
-{
-	struct arm_clk_ratios *arm_ratio;
-	unsigned long arm_freq = 1700;	/* FIXME: use get_arm_clk() */
-	int i;
-
-	for (i = 0, arm_ratio = arm_clk_ratios; i < ARRAY_SIZE(arm_clk_ratios);
-		i++, arm_ratio++) {
-		if (arm_ratio->arm_freq_mhz == arm_freq)
-			return arm_ratio;
-	}
-
-	return NULL;
-}
-
-/* exynos5: set the mmc clock */
-void set_mmc_clk(int dev_index, unsigned int div)
-{
-	unsigned int *addr;
-	unsigned int val;
-
-	/*
-	 * CLK_DIV_FSYS1
-	 * MMC0_PRE_RATIO [15:8], MMC1_PRE_RATIO [31:24]
-	 * CLK_DIV_FSYS2
-	 * MMC2_PRE_RATIO [15:8], MMC3_PRE_RATIO [31:24]
-	 */
-	if (dev_index < 2) {
-		addr = &exynos_clock->div_fsys1;
-	} else {
-		addr = &exynos_clock->div_fsys2;
-		dev_index -= 2;
-	}
-
-	val = readl(addr);
-	val &= ~(0xff << ((dev_index << 4) + 8));
-	val |= (div & 0xff) << ((dev_index << 4) + 8);
-	writel(val, addr);
-}
-
-void clock_ll_set_pre_ratio(enum periph_id periph_id, unsigned divisor)
-{
-	unsigned shift;
-	unsigned mask = 0xff;
-	u32 *reg;
-
-	/*
-	 * For now we only handle a very small subset of peripherals here.
-	 * Others will need to (and do) mangle the clock registers
-	 * themselves, At some point it is hoped that this function can work
-	 * from a table or calculated register offset / mask. For now this
-	 * is at least better than spreading clock control code around
-	 * U-Boot.
-	 */
-	switch (periph_id) {
-	case PERIPH_ID_SPI0:
-		reg = &exynos_clock->div_peric1;
-		shift = 8;
-		break;
-	case PERIPH_ID_SPI1:
-		reg = &exynos_clock->div_peric1;
-		shift = 24;
-		break;
-	case PERIPH_ID_SPI2:
-		reg = &exynos_clock->div_peric2;
-		shift = 8;
-		break;
-	case PERIPH_ID_SPI3:
-		reg = &exynos_clock->sclk_div_isp;
-		shift = 4;
-		break;
-	case PERIPH_ID_SPI4:
-		reg = &exynos_clock->sclk_div_isp;
-		shift = 16;
-		break;
-	default:
-		printk(BIOS_DEBUG, "%s: Unsupported peripheral ID %d\n", __func__,
-		      periph_id);
-		return;
-	}
-	clrsetbits_le32(reg, mask << shift, (divisor & mask) << shift);
-}
-
-void clock_ll_set_ratio(enum periph_id periph_id, unsigned divisor)
-{
-	unsigned shift;
-	unsigned mask = 0xff;
-	u32 *reg;
-
-	switch (periph_id) {
-	case PERIPH_ID_SPI0:
-		reg = &exynos_clock->div_peric1;
-		shift = 0;
-		break;
-	case PERIPH_ID_SPI1:
-		reg = &exynos_clock->div_peric1;
-		shift = 16;
-		break;
-	case PERIPH_ID_SPI2:
-		reg = &exynos_clock->div_peric2;
-		shift = 0;
-		break;
-	case PERIPH_ID_SPI3:
-		reg = &exynos_clock->sclk_div_isp;
-		shift = 0;
-		break;
-	case PERIPH_ID_SPI4:
-		reg = &exynos_clock->sclk_div_isp;
-		shift = 12;
-		break;
-	default:
-		printk(BIOS_DEBUG, "%s: Unsupported peripheral ID %d\n", __func__,
-		      periph_id);
-		return;
-	}
-	clrsetbits_le32(reg, mask << shift, (divisor & mask) << shift);
-}
-
-/**
- * Linearly searches for the most accurate main and fine stage clock scalars
- * (divisors) for a specified target frequency and scalar bit sizes by checking
- * all multiples of main_scalar_bits values. Will always return scalars up to or
- * slower than target.
- *
- * @param main_scalar_bits	Number of main scalar bits, must be > 0 and < 32
- * @param fine_scalar_bits	Number of fine scalar bits, must be > 0 and < 32
- * @param input_freq		Clock frequency to be scaled in Hz
- * @param target_freq		Desired clock frequency in Hz
- * @param best_fine_scalar	Pointer to store the fine stage divisor
- *
- * @return best_main_scalar	Main scalar for desired frequency or -1 if none
- * found
- */
-static int clock_calc_best_scalar(unsigned int main_scaler_bits,
-	unsigned int fine_scalar_bits, unsigned int input_rate,
-	unsigned int target_rate, unsigned int *best_fine_scalar)
-{
-	int i;
-	int best_main_scalar = -1;
-	unsigned int best_error = target_rate;
-	const unsigned int cap = (1 << fine_scalar_bits) - 1;
-	const unsigned int loops = 1 << main_scaler_bits;
-
-	printk(BIOS_DEBUG, "Input Rate is %u, Target is %u, Cap is %u\n", input_rate,
-			target_rate, cap);
-
-	ASSERT(best_fine_scalar != NULL);
-	ASSERT(main_scaler_bits <= fine_scalar_bits);
-
-	*best_fine_scalar = 1;
-
-	if (input_rate == 0 || target_rate == 0)
-		return -1;
-
-	if (target_rate >= input_rate)
-		return 1;
-
-	for (i = 1; i <= loops; i++) {
-		const unsigned int effective_div = MAX(MIN(input_rate / i /
-							target_rate, cap), 1);
-		const unsigned int effective_rate = input_rate / i /
-							effective_div;
-		const int error = target_rate - effective_rate;
-
-		printk(BIOS_DEBUG, "%d|effdiv:%u, effrate:%u, error:%d\n", i, effective_div,
-				effective_rate, error);
-
-		if (error >= 0 && error <= best_error) {
-			best_error = error;
-			best_main_scalar = i;
-			*best_fine_scalar = effective_div;
-		}
-	}
-
-	return best_main_scalar;
-}
-
-int clock_set_rate(enum periph_id periph_id, unsigned int rate)
-{
-	int main_scalar;
-	unsigned int fine;
-
-	switch (periph_id) {
-	case PERIPH_ID_SPI0:
-	case PERIPH_ID_SPI1:
-	case PERIPH_ID_SPI2:
-	case PERIPH_ID_SPI3:
-	case PERIPH_ID_SPI4:
-		main_scalar = clock_calc_best_scalar(4, 8, 400000000, rate, &fine);
-		if (main_scalar < 0) {
-			printk(BIOS_DEBUG, "%s: Cannot set clock rate for periph %d",
-					__func__, periph_id);
-			return -1;
-		}
-		clock_ll_set_ratio(periph_id, main_scalar - 1);
-		clock_ll_set_pre_ratio(periph_id, fine - 1);
-		break;
-	default:
-		printk(BIOS_DEBUG, "%s: Unsupported peripheral ID %d\n", __func__,
-		      periph_id);
-		return -1;
-	}
-
-	return 0;
-}
-
-int clock_set_mshci(enum periph_id peripheral)
-{
-	u32 *addr;
-	unsigned int clock;
-	unsigned int tmp;
-	unsigned int i;
-
-	/* get mpll clock */
-	clock = get_pll_clk(MPLL) / 1000000;
-
-	/*
-	 * CLK_DIV_FSYS1
-	 * MMC0_PRE_RATIO [15:8], MMC0_RATIO [3:0]
-	 * CLK_DIV_FSYS2
-	 * MMC2_PRE_RATIO [15:8], MMC2_RATIO [3:0]
-	 */
-	switch (peripheral) {
-	case PERIPH_ID_SDMMC0:
-		addr = &exynos_clock->div_fsys1;
-		break;
-	case PERIPH_ID_SDMMC2:
-		addr = &exynos_clock->div_fsys2;
-		break;
-	default:
-		printk(BIOS_DEBUG, "invalid peripheral\n");
-		return -1;
-	}
-	tmp = readl(addr) & ~0xff0f;
-	for (i = 0; i <= 0xf; i++) {
-		if ((clock / (i + 1)) <= 400) {
-			writel(tmp | i << 0, addr);
-			break;
-		}
-	}
-	return 0;
-}
-
-int clock_epll_set_rate(unsigned long rate)
-{
-	unsigned int epll_con, epll_con_k;
-	unsigned int i;
-	unsigned int lockcnt;
-	struct mono_time current, end;
-
-	epll_con = readl(&exynos_clock->epll_con0);
-	epll_con &= ~((EPLL_CON0_LOCK_DET_EN_MASK <<
-			EPLL_CON0_LOCK_DET_EN_SHIFT) |
-		EPLL_CON0_MDIV_MASK << EPLL_CON0_MDIV_SHIFT |
-		EPLL_CON0_PDIV_MASK << EPLL_CON0_PDIV_SHIFT |
-		EPLL_CON0_SDIV_MASK << EPLL_CON0_SDIV_SHIFT);
-
-	for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
-		if (epll_div[i].freq_out == rate)
-			break;
-	}
-
-	if (i == ARRAY_SIZE(epll_div))
-		return -1;
-
-	epll_con_k = epll_div[i].k_dsm << 0;
-	epll_con |= epll_div[i].en_lock_det << EPLL_CON0_LOCK_DET_EN_SHIFT;
-	epll_con |= epll_div[i].m_div << EPLL_CON0_MDIV_SHIFT;
-	epll_con |= epll_div[i].p_div << EPLL_CON0_PDIV_SHIFT;
-	epll_con |= epll_div[i].s_div << EPLL_CON0_SDIV_SHIFT;
-
-	/*
-	 * Required period ( in cycles) to generate a stable clock output.
-	 * The maximum clock time can be up to 3000 * PDIV cycles of PLLs
-	 * frequency input (as per spec)
-	 */
-	lockcnt = 3000 * epll_div[i].p_div;
-
-	writel(lockcnt, &exynos_clock->epll_lock);
-	writel(epll_con, &exynos_clock->epll_con0);
-	writel(epll_con_k, &exynos_clock->epll_con1);
-
-	timer_monotonic_get(&current);
-	end = current;
-	mono_time_add_msecs(&end, TIMEOUT_EPLL_LOCK);
-
-	 while (!(readl(&exynos_clock->epll_con0) &
-			(0x1 << EXYNOS5_EPLLCON0_LOCKED_SHIFT))) {
-		if (mono_time_after(&current, &end)) {
-			printk(BIOS_DEBUG,
-				"%s: Timeout waiting for EPLL lock\n",
-				__func__);
-			return -1;
-		}
-		timer_monotonic_get(&current);
-	}
-
-	return 0;
-}
-
-void clock_select_i2s_clk_source(void)
-{
-	clrsetbits_le32(&exynos_clock->src_peric1, AUDIO1_SEL_MASK,
-			(CLK_SRC_SCLK_EPLL));
-}
-
-int clock_set_i2s_clk_prescaler(unsigned int src_frq, unsigned int dst_frq)
-{
-	unsigned int div ;
-
-	if ((dst_frq == 0) || (src_frq == 0)) {
-		printk(BIOS_DEBUG, "%s: Invalid frequency input for prescaler\n", __func__);
-		printk(BIOS_DEBUG, "src frq = %d des frq = %d ", src_frq, dst_frq);
-		return -1;
-	}
-
-	div = (src_frq / dst_frq);
-	if (div > AUDIO_1_RATIO_MASK) {
-		printk(BIOS_DEBUG, "%s: Frequency ratio is out of range\n", __func__);
-		printk(BIOS_DEBUG, "src frq = %d des frq = %d ", src_frq, dst_frq);
-		return -1;
-	}
-	clrsetbits_le32(&exynos_clock->div_peric4, AUDIO_1_RATIO_MASK,
-				(div & AUDIO_1_RATIO_MASK));
-	return 0;
-}