ARMv7: De-uboot-ify Exynos5250 code

When starting the Exynos5250 port, a lot of unneeded u-boot code
was imported. This is an attempt to get rid of a lot of unneeded
code before the port is used as a basis for further ARM ports.

There is a lot more that can be done, including cleaning up the
5250's Kconfig file.

Change-Id: I2d88676c436eea4b21bcb62f40018af9fabb3016
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Signed-off-by: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/3642
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>

1 files changed, 497 insertions, 0 deletions

diff --git a/src/cpu/samsung/exynos5250/dp.h b/src/cpu/samsung/exynos5250/dp.h
new file mode 100644
index 0000000000..5c778bae47
--- /dev/null
+++ b/src/cpu/samsung/exynos5250/dp.h
@@ -0,0 +1,497 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2013 Google Inc.
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* Register map for Exynos5 DP */
+
+#ifndef CPU_SAMSUNG_EXYNOS5250_DP_H
+#define CPU_SAMSUNG_EXYNOS5250_DP_H
+
+/* DSIM register map */
+struct exynos5_dp {
+	u8	res1[0x10];
+	u32	dp_tx_version;
+	u32	dp_tx_sw_reset;
+	u32	func_en_1;
+	u32	func_en_2;
+	u32	video_ctl_1;
+	u32	video_ctl_2;
+	u32	video_ctl_3;
+	u32	video_ctl_4;
+	u32	clr_blue_cb;
+	u32	clr_green_y;
+	u32	clr_red_cr;
+	u32	video_ctl_8;
+	u8	res2[0x4];
+	u32	video_ctl_10;
+	u32	total_line_l;
+	u32	total_line_h;
+	u32	active_line_l;
+	u32	active_line_h;
+	u32	v_f_porch;
+	u32	vsync;
+	u32	v_b_porch;
+	u32	total_pixel_l;
+	u32	total_pixel_h;
+	u32	active_pixel_l;
+	u32	active_pixel_h;
+	u32	h_f_porch_l;
+	u32	h_f_porch_h;
+	u32	hsync_l;
+	u32	hysnc_h;
+	u32	h_b_porch_l;
+	u32	h_b_porch_h;
+	u32	vid_status;
+	u32	total_line_sta_l;
+	u32	total_line_sta_h;
+	u32	active_line_sta_l;
+	u32	active_line_sta_h;
+	u32	v_f_porch_sta;
+	u32	vsync_sta;
+	u32	v_b_porch_sta;
+	u32	total_pixel_sta_l;
+	u32	total_pixel_sta_h;
+	u32	active_pixel_sta_l;
+	u32	active_pixel_sta_h;
+	u32	h_f_porch_sta_l;
+	u32	h_f_porch_sta_h;
+	u32	hsync_sta_l;
+	u32	hsync_sta_h;
+	u32	h_b_porch_sta_l;
+	u32	h_b_porch__sta_h;
+	u8	res3[0x288];
+	u32	lane_map;
+	u8	res4[0x10];
+	u32	analog_ctl_1;
+	u32	analog_ctl_2;
+	u32	analog_ctl_3;
+	u32	pll_filter_ctl_1;
+	u32	tx_amp_tuning_ctl;
+	u8	res5[0xc];
+	u32	aux_hw_retry_ctl;
+	u8	res6[0x2c];
+	u32	int_state;
+	u32	common_int_sta_1;
+	u32	common_int_sta_2;
+	u32	common_int_sta_3;
+	u32	common_int_sta_4;
+	u8	res7[0x8];
+	u32	dp_int_sta;
+	u32	common_int_mask_1;
+	u32	common_int_mask_2;
+	u32	common_int_mask_3;
+	u32	common_int_mask_4;
+	u8	res8[0x08];
+	u32	int_sta_mask;
+	u32	int_ctl;
+	u8	res9[0x200];
+	u32	sys_ctl_1;
+	u32	sys_ctl_2;
+	u32	sys_ctl_3;
+	u32	sys_ctl_4;
+	u32	dp_vid_ctl;
+	u8	res10[0x2c];
+	u32	pkt_send_ctl;
+	u8	res11[0x4];
+	u32	dp_hdcp_ctl;
+	u8	res12[0x34];
+	u32	link_bw_set;
+	u32	lane_count_set;
+	u32	dp_training_ptn_set;
+	u32	ln0_link_trn_ctl;
+	u32	ln1_link_trn_ctl;
+	u32	ln2_link_trn_ctl;
+	u32	ln3_link_trn_ctl;
+	u32	dp_dn_spread;
+	u32	dp_hw_link_training;
+	u8	res13[0x1c];
+	u32	dp_debug_ctl;
+	u32	dp_hpd_deglitch_l;
+	u32	dp_hpd_deglitch_h;
+	u8	res14[0x14];
+	u32	dp_link_debug_ctl;
+	u8	res15[0x1c];
+	u32	m_vid_0;
+	u32	m_vid_1;
+	u32	m_vid_2;
+	u32	n_vid_0;
+	u32	n_vid_1;
+	u32	n_vid_2;
+	u32	m_vid_mon;
+	u32	dp_pll_ctl;
+	u32	dp_phy_pd;
+	u32	dp_phy_test;
+	u8	res16[0x8];
+	u32	dp_video_fifo_thrd;
+	u8	res17[0x8];
+	u32	dp_audio_margin;
+	u32	dp_dn_spread_ctl_1;
+	u32	dp_dn_spread_ctl_2;
+	u8	res18[0x18];
+	u32	dp_m_cal_ctl;
+	u32	m_vid_gen_filter_th;
+	u8	res19[0x14];
+	u32	m_aud_gen_filter_th;
+	u32	aux_ch_sta;
+	u32	aux_err_num;
+	u32	aux_ch_defer_dtl;
+	u32	aux_rx_comm;
+	u32	buf_data_ctl;
+	u32	aux_ch_ctl_1;
+	u32	aux_addr_7_0;
+	u32	aux_addr_15_8;
+	u32	aux_addr_19_16;
+	u32	aux_ch_ctl_2;
+	u8   res20[0x18];
+	u32	buf_data_0;
+	u8	res21[0x3c];
+	u32	soc_general_ctl;
+};
+/* DP_TX_SW_RESET */
+#define RESET_DP_TX				(1 << 0)
+
+/* DP_FUNC_EN_1 */
+#define MASTER_VID_FUNC_EN_N			(1 << 7)
+#define SLAVE_VID_FUNC_EN_N			(1 << 5)
+#define AUD_FIFO_FUNC_EN_N			(1 << 4)
+#define AUD_FUNC_EN_N				(1 << 3)
+#define HDCP_FUNC_EN_N				(1 << 2)
+#define CRC_FUNC_EN_N				(1 << 1)
+#define SW_FUNC_EN_N				(1 << 0)
+
+/* DP_FUNC_EN_2 */
+#define SSC_FUNC_EN_N				(1 << 7)
+#define AUX_FUNC_EN_N				(1 << 2)
+#define SERDES_FIFO_FUNC_EN_N			(1 << 1)
+#define LS_CLK_DOMAIN_FUNC_EN_N			(1 << 0)
+
+/* DP_VIDEO_CTL_1 */
+#define VIDEO_EN				(1 << 7)
+#define HDCP_VIDEO_MUTE				(1 << 6)
+
+/* DP_VIDEO_CTL_1 */
+#define IN_D_RANGE_MASK				(1 << 7)
+#define IN_D_RANGE_SHIFT			(7)
+#define IN_D_RANGE_CEA				(1 << 7)
+#define IN_D_RANGE_VESA				(0 << 7)
+#define IN_BPC_MASK				(7 << 4)
+#define IN_BPC_SHIFT				(4)
+#define IN_BPC_12_BITS				(3 << 4)
+#define IN_BPC_10_BITS				(2 << 4)
+#define IN_BPC_8_BITS				(1 << 4)
+#define IN_BPC_6_BITS				(0 << 4)
+#define IN_COLOR_F_MASK				(3 << 0)
+#define IN_COLOR_F_SHIFT			(0)
+#define IN_COLOR_F_YCBCR444			(2 << 0)
+#define IN_COLOR_F_YCBCR422			(1 << 0)
+#define IN_COLOR_F_RGB				(0 << 0)
+
+/* DP_VIDEO_CTL_3 */
+#define IN_YC_COEFFI_MASK			(1 << 7)
+#define IN_YC_COEFFI_SHIFT			(7)
+#define IN_YC_COEFFI_ITU709			(1 << 7)
+#define IN_YC_COEFFI_ITU601			(0 << 7)
+#define VID_CHK_UPDATE_TYPE_MASK		(1 << 4)
+#define VID_CHK_UPDATE_TYPE_SHIFT		(4)
+#define VID_CHK_UPDATE_TYPE_1			(1 << 4)
+#define VID_CHK_UPDATE_TYPE_0			(0 << 4)
+
+/* DP_VIDEO_CTL_10 */
+#define FORMAT_SEL				(1 << 4)
+#define INTERACE_SCAN_CFG			(1 << 2)
+#define VSYNC_POLARITY_CFG			(1 << 1)
+#define HSYNC_POLARITY_CFG			(1 << 0)
+
+/* DP_LANE_MAP */
+#define LANE3_MAP_LOGIC_LANE_0			(0 << 6)
+#define LANE3_MAP_LOGIC_LANE_1			(1 << 6)
+#define LANE3_MAP_LOGIC_LANE_2			(2 << 6)
+#define LANE3_MAP_LOGIC_LANE_3			(3 << 6)
+#define LANE2_MAP_LOGIC_LANE_0			(0 << 4)
+#define LANE2_MAP_LOGIC_LANE_1			(1 << 4)
+#define LANE2_MAP_LOGIC_LANE_2			(2 << 4)
+#define LANE2_MAP_LOGIC_LANE_3			(3 << 4)
+#define LANE1_MAP_LOGIC_LANE_0			(0 << 2)
+#define LANE1_MAP_LOGIC_LANE_1			(1 << 2)
+#define LANE1_MAP_LOGIC_LANE_2			(2 << 2)
+#define LANE1_MAP_LOGIC_LANE_3			(3 << 2)
+#define LANE0_MAP_LOGIC_LANE_0			(0 << 0)
+#define LANE0_MAP_LOGIC_LANE_1			(1 << 0)
+#define LANE0_MAP_LOGIC_LANE_2			(2 << 0)
+#define LANE0_MAP_LOGIC_LANE_3			(3 << 0)
+
+/* DP_AUX_HW_RETRY_CTL */
+#define AUX_BIT_PERIOD_SHIFT			8
+#define AUX_BIT_PERIOD_MASK			7
+
+#define AUX_HW_RETRY_INTERVAL_SHIFT		3
+#define AUX_HW_RETRY_INTERVAL_600_US		0
+#define AUX_HW_RETRY_INTERVAL_800_US		1
+#define AUX_HW_RETRY_INTERVAL_1000_US		2
+#define AUX_HW_RETRY_INTERVAL_1800_US		3
+#define AUX_HW_RETRY_COUNT_SHIFT		0
+#define AUX_HW_RETRY_COUNT_MASK			7
+
+/* DP_COMMON_INT_STA_1 */
+#define VSYNC_DET				(1 << 7)
+#define PLL_LOCK_CHG				(1 << 6)
+#define SPDIF_ERR				(1 << 5)
+#define SPDIF_UNSTBL				(1 << 4)
+#define VID_FORMAT_CHG				(1 << 3)
+#define AUD_CLK_CHG				(1 << 2)
+#define VID_CLK_CHG				(1 << 1)
+#define SW_INT					(1 << 0)
+
+/* DP_COMMON_INT_STA_2 */
+#define ENC_EN_CHG				(1 << 6)
+#define HW_BKSV_RDY				(1 << 3)
+#define HW_SHA_DONE				(1 << 2)
+#define HW_AUTH_STATE_CHG			(1 << 1)
+#define HW_AUTH_DONE				(1 << 0)
+
+/* DP_COMMON_INT_STA_3 */
+#define AFIFO_UNDER				(1 << 7)
+#define AFIFO_OVER				(1 << 6)
+#define R0_CHK_FLAG				(1 << 5)
+
+/* DP_COMMON_INT_STA_4 */
+#define PSR_ACTIVE				(1 << 7)
+#define PSR_INACTIVE				(1 << 6)
+#define SPDIF_BI_PHASE_ERR			(1 << 5)
+#define HOTPLUG_CHG				(1 << 2)
+#define HPD_LOST				(1 << 1)
+#define PLUG					(1 << 0)
+
+/* DP_INT_STA */
+#define INT_HPD					(1 << 6)
+#define HW_TRAINING_FINISH			(1 << 5)
+#define RPLY_RECEIV				(1 << 1)
+#define AUX_ERR					(1 << 0)
+
+/* DP_INT_CTL */
+#define INT_POL0				(1 << 0)
+#define INT_POL1				(1 << 1)
+#define SOFT_INT_CTRL				(1 << 2)
+
+/* DP_SYS_CTL_1 */
+#define DET_STA					(1 << 2)
+#define FORCE_DET				(1 << 1)
+#define DET_CTRL				(1 << 0)
+
+/* DP_SYS_CTL_2 */
+#define CHA_CRI_SHIFT				4
+#define CHA_CRI_MASK				0xf
+#define CHA_STA					(1 << 2)
+#define FORCE_CHA				(1 << 1)
+#define CHA_CTRL				(1 << 0)
+
+/* DP_SYS_CTL_3 */
+#define HPD_STATUS				(1 << 6)
+#define F_HPD					(1 << 5)
+#define HPD_CTRL				(1 << 4)
+#define HDCP_RDY				(1 << 3)
+#define STRM_VALID				(1 << 2)
+#define F_VALID					(1 << 1)
+#define VALID_CTRL				(1 << 0)
+
+/* DP_SYS_CTL_4 */
+#define FIX_M_AUD				(1 << 4)
+#define ENHANCED				(1 << 3)
+#define FIX_M_VID				(1 << 2)
+#define M_VID_UPDATE_CTRL			(3 << 0)
+
+/* DP_TRAINING_PTN_SET */
+#define SCRAMBLER_TYPE				(1 << 9)
+#define HW_LINK_TRAINING_PATTERN		(1 << 8)
+#define SCRAMBLING_DISABLE			(1 << 5)
+#define SCRAMBLING_ENABLE			(0 << 5)
+#define LINK_QUAL_PATTERN_SET_MASK		(3 << 2)
+#define LINK_QUAL_PATTERN_SET_PRBS7		(3 << 2)
+#define LINK_QUAL_PATTERN_SET_D10_2		(1 << 2)
+#define LINK_QUAL_PATTERN_SET_DISABLE		(0 << 2)
+#define SW_TRAINING_PATTERN_SET_MASK		(3 << 0)
+#define SW_TRAINING_PATTERN_SET_PTN2		(2 << 0)
+#define SW_TRAINING_PATTERN_SET_PTN1		(1 << 0)
+#define SW_TRAINING_PATTERN_SET_NORMAL		(0 << 0)
+
+/* DP_LN0_LINK_TRAINING_CTL */
+#define PRE_EMPHASIS_SET_SHIFT			(3)
+
+/* DP_DEBUG_CTL */
+#define PLL_LOCK				(1 << 4)
+#define F_PLL_LOCK				(1 << 3)
+#define PLL_LOCK_CTRL				(1 << 2)
+#define PN_INV					(1 << 0)
+
+/* DP_M_VID */
+#define M_VID_0_VALUE_SHIFT			0
+#define M_VID_1_VALUE_SHIFT			8
+#define M_VID_2_VALUE_SHIFT			16
+
+/* DP_M_VID */
+#define N_VID_0_VALUE_SHIFT			0
+#define N_VID_1_VALUE_SHIFT			8
+#define N_VID_2_VALUE_SHIFT			16
+
+/* DP_PLL_CTL */
+#define DP_PLL_PD				(1 << 7)
+#define DP_PLL_RESET				(1 << 6)
+#define DP_PLL_LOOP_BIT_DEFAULT			(1 << 4)
+#define DP_PLL_REF_BIT_1_1250V			(5 << 0)
+#define DP_PLL_REF_BIT_1_2500V			(7 << 0)
+
+/* DP_PHY_PD */
+#define DP_PHY_PD				(1 << 5)
+#define AUX_PD					(1 << 4)
+#define CH3_PD					(1 << 3)
+#define CH2_PD					(1 << 2)
+#define CH1_PD					(1 << 1)
+#define CH0_PD					(1 << 0)
+
+/* DP_PHY_TEST */
+#define MACRO_RST				(1 << 5)
+#define CH1_TEST				(1 << 1)
+#define CH0_TEST				(1 << 0)
+
+/* DP_AUX_CH_STA */
+#define AUX_BUSY				(1 << 4)
+#define AUX_STATUS_MASK				(0xf << 0)
+
+/* DP_AUX_CH_DEFER_CTL */
+#define DEFER_CTRL_EN				(1 << 7)
+#define DEFER_COUNT_SHIFT			0
+#define DEFER_COUNT_MASK			0x7f
+
+/* DP_AUX_RX_COMM */
+#define AUX_RX_COMM_I2C_DEFER			(2 << 2)
+#define AUX_RX_COMM_AUX_DEFER			(2 << 0)
+
+/* DP_BUFFER_DATA_CTL */
+#define BUF_CLR					(1 << 7)
+
+/* Maximum number of tries for Aux Transaction */
+#define MAX_AUX_RETRY_COUNT			10
+
+/* DP_AUX_CH_CTL_1 */
+#define AUX_LENGTH_SHIFT			4
+#define AUX_LENGTH_MASK				0xf
+
+#define AUX_TX_COMM_MASK			(0xf << 0)
+#define AUX_TX_COMM_DP_TRANSACTION		(1 << 3)
+#define AUX_TX_COMM_I2C_TRANSACTION		(0 << 3)
+#define AUX_TX_COMM_MOT				(1 << 2)
+#define AUX_TX_COMM_WRITE			(0 << 0)
+#define AUX_TX_COMM_READ			(1 << 0)
+
+/* DP_AUX_ADDR_7_0 */
+#define AUX_ADDR_7_0_SHIFT			0
+#define AUX_ADDR_7_0_MASK			0xff
+
+/* DP_AUX_ADDR_15_8 */
+#define AUX_ADDR_15_8_SHIFT			8
+#define AUX_ADDR_15_8_MASK			0xff
+
+/* DP_AUX_ADDR_19_16 */
+#define AUX_ADDR_19_16_SHIFT			16
+#define AUX_ADDR_19_16_MASK			0x0f
+
+/* DP_AUX_CH_CTL_2 */
+#define ADDR_ONLY				(1 << 1)
+#define AUX_EN					(1 << 0)
+
+/* DP_SOC_GENERAL_CTL */
+#define AUDIO_MODE_SPDIF_MODE			(1 << 8)
+#define AUDIO_MODE_MASTER_MODE			(0 << 8)
+#define MASTER_VIDEO_INTERLACE_EN		(1 << 4)
+#define VIDEO_MASTER_CLK_SEL			(1 << 2)
+#define VIDEO_MASTER_MODE_EN			(1 << 1)
+#define VIDEO_MODE_MASK				(1 << 0)
+#define VIDEO_MODE_SLAVE_MODE			(1 << 0)
+#define VIDEO_MODE_MASTER_MODE			(0 << 0)
+
+#define HW_TRAINING_ERROR_CODE                 (7<<4)
+#define HW_TRAINING_EN                         (1<<0)
+
+/* I2C EDID Chip ID, Slave Address */
+#define I2C_EDID_DEVICE_ADDR			0x50
+#define I2C_E_EDID_DEVICE_ADDR			0x30
+
+#define EDID_BLOCK_LENGTH			0x80
+#define EDID_HEADER_PATTERN			0x00
+#define EDID_EXTENSION_FLAG			0x7e
+#define EDID_CHECKSUM				0x7f
+
+/* Definition for DPCD Register */
+#define DPCD_ADDR_DPCD_REV			0x0000
+#define DPCD_ADDR_MAX_LINK_RATE			0x0001
+#define DPCD_ADDR_MAX_LANE_COUNT		0x0002
+#define DPCD_ADDR_LINK_BW_SET			0x0100
+#define DPCD_ADDR_LANE_COUNT_SET		0x0101
+#define DPCD_ADDR_TRAINING_PATTERN_SET		0x0102
+#define DPCD_ADDR_TRAINING_LANE0_SET		0x0103
+#define DPCD_ADDR_LANE0_1_STATUS		0x0202
+#define DPCD_ADDR_LANE_ALIGN__STATUS_UPDATED	0x0204
+#define DPCD_ADDR_ADJUST_REQUEST_LANE0_1	0x0206
+#define DPCD_ADDR_ADJUST_REQUEST_LANE2_3	0x0207
+#define DPCD_ADDR_TEST_REQUEST			0x0218
+#define DPCD_ADDR_TEST_RESPONSE			0x0260
+#define DPCD_ADDR_TEST_EDID_CHECKSUM		0x0261
+#define DPCD_ADDR_SINK_POWER_STATE		0x0600
+
+/* DPCD_ADDR_MAX_LANE_COUNT */
+#define DPCD_MAX_LANE_COUNT_MASK		0x1f
+
+/* DPCD_ADDR_LANE_COUNT_SET */
+#define DPCD_ENHANCED_FRAME_EN			(1 << 7)
+#define DPCD_LANE_COUNT_SET_MASK		0x1f
+
+/* DPCD_ADDR_TRAINING_PATTERN_SET */
+#define DPCD_SCRAMBLING_DISABLED		(1 << 5)
+#define DPCD_SCRAMBLING_ENABLED			(0 << 5)
+#define DPCD_TRAINING_PATTERN_2			(2 << 0)
+#define DPCD_TRAINING_PATTERN_1			(1 << 0)
+#define DPCD_TRAINING_PATTERN_DISABLED		(0 << 0)
+
+/* DPCD_ADDR_LANE0_1_STATUS */
+#define DPCD_LANE_SYMBOL_LOCKED			(1 << 2)
+#define DPCD_LANE_CHANNEL_EQ_DONE		(1 << 1)
+#define DPCD_LANE_CR_DONE			(1 << 0)
+#define DPCD_CHANNEL_EQ_BITS			(DPCD_LANE_CR_DONE | \
+						 DPCD_LANE_CHANNEL_EQ_DONE | \
+						 DPCD_LANE_SYMBOL_LOCKED)
+
+/* DPCD_ADDR_LANE_ALIGN__STATUS_UPDATED */
+#define DPCD_LINK_STATUS_UPDATED		(1 << 7)
+#define DPCD_DOWNSTREAM_PORT_STATUS_CHANGED	(1 << 6)
+#define DPCD_INTERLANE_ALIGN_DONE		(1 << 0)
+
+/* DPCD_ADDR_TEST_REQUEST */
+#define DPCD_TEST_EDID_READ			(1 << 2)
+
+/* DPCD_ADDR_TEST_RESPONSE */
+#define DPCD_TEST_EDID_CHECKSUM_WRITE		(1 << 2)
+
+/* DPCD_ADDR_SINK_POWER_STATE */
+#define DPCD_SET_POWER_STATE_D0			(1 << 0)
+#define DPCD_SET_POWER_STATE_D4			(2 << 0)
+
+/* Allow DP Gating clock and set FIMD source to 267 Mhz for DP */
+void clock_init_dp_clock(void);
+
+#endif