armv7: Move Exynos from 'cpu' to 'soc'.

The Exynos family and most ARM products are SoC, not just CPU.

We used to put ARM code in src/cpu to avoid polluting the code base for what was
essentially an experiment at the time. Now that it's past the experimental phase
and we're going to see more SoCs (including intel/baytrail) in coreboot.

Change-Id: I5ea1f822664244edf5f77087bc8018d7c535f81c
Reviewed-on: https://chromium-review.googlesource.com/170891
Tested-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit c8bb8fe0b20be37465f93c738d80e7e43033670a)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6739
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>

1 files changed, 0 insertions, 279 deletions

diff --git a/src/cpu/samsung/exynos5420/gpio.c b/src/cpu/samsung/exynos5420/gpio.c
deleted file mode 100644
index 2b65eda04e..0000000000
--- a/src/cpu/samsung/exynos5420/gpio.c
+++ /dev/null
@@ -1,279 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2009 Samsung Electronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <console/console.h>
-#include <string.h>
-#include <delay.h>
-#include <assert.h>
-#include "gpio.h"
-#include "cpu.h"
-
-#define CON_MASK(x)		(0xf << ((x) << 2))
-#define CON_SFR(x, v)		((v) << ((x) << 2))
-
-#define DAT_MASK(x)		(0x1 << (x))
-#define DAT_SET(x)		(0x1 << (x))
-
-#define PULL_MASK(x)		(0x3 << ((x) << 1))
-#define PULL_MODE(x, v)		((v) << ((x) << 1))
-
-#define DRV_MASK(x)		(0x3 << ((x) << 1))
-#define DRV_SET(x, m)		((m) << ((x) << 1))
-#define RATE_MASK(x)		(0x1 << (x + 16))
-#define RATE_SET(x)		(0x1 << (x + 16))
-
-struct gpio_info {
-	unsigned int reg_addr;	/* Address of register for this part */
-	unsigned int max_gpio;	/* Maximum GPIO in this part */
-};
-
-static const struct gpio_info gpio_data[EXYNOS_GPIO_NUM_PARTS] = {
-	{ EXYNOS5420_GPIO_PART1_BASE, GPIO_MAX_PORT_PART_1 },
-	{ EXYNOS5420_GPIO_PART2_BASE, GPIO_MAX_PORT_PART_2 },
-	{ EXYNOS5420_GPIO_PART3_BASE, GPIO_MAX_PORT_PART_3 },
-	{ EXYNOS5420_GPIO_PART4_BASE, GPIO_MAX_PORT_PART_4 },
-	{ EXYNOS5420_GPIO_PART5_BASE, GPIO_MAX_PORT_PART_5 },
-	{ EXYNOS5420_GPIO_PART6_BASE, GPIO_MAX_PORT },
-};
-
-/* This macro gets gpio pin offset from 0..7 */
-#define GPIO_BIT(x)     ((x) & 0x7)
-
-static struct gpio_bank *gpio_get_bank(unsigned int gpio)
-{
-	const struct gpio_info *data;
-	unsigned int upto;
-	int i;
-
-	for (i = upto = 0, data = gpio_data; i < EXYNOS_GPIO_NUM_PARTS;
-			i++, upto = data->max_gpio, data++) {
-		if (gpio < data->max_gpio) {
-			struct gpio_bank *bank;
-
-			bank = (struct gpio_bank *)data->reg_addr;
-			bank += (gpio - upto) / GPIO_PER_BANK;
-			return bank;
-		}
-	}
-
-	ASSERT(gpio < GPIO_MAX_PORT);	/* ...which it will not be */
-	return NULL;
-}
-
-/* Common GPIO API - only available on Exynos5 */
-void gpio_cfg_pin(int gpio, int cfg)
-{
-	unsigned int value;
-	struct gpio_bank *bank = gpio_get_bank(gpio);
-
-	value = readl(&bank->con);
-	value &= ~CON_MASK(GPIO_BIT(gpio));
-	value |= CON_SFR(GPIO_BIT(gpio), cfg);
-	writel(value, &bank->con);
-}
-
-static int gpio_get_cfg(int gpio)
-{
-	struct gpio_bank *bank = gpio_get_bank(gpio);
-	int shift = GPIO_BIT(gpio) << 2;
-
-	return (readl(&bank->con) & CON_MASK(GPIO_BIT(gpio))) >> shift;
-}
-
-void gpio_set_pull(int gpio, int mode)
-{
-	unsigned int value;
-	struct gpio_bank *bank = gpio_get_bank(gpio);
-
-	value = readl(&bank->pull);
-	value &= ~PULL_MASK(GPIO_BIT(gpio));
-
-	switch (mode) {
-	case GPIO_PULL_DOWN:
-	case GPIO_PULL_UP:
-		value |= PULL_MODE(GPIO_BIT(gpio), mode);
-		break;
-	default:
-		break;
-	}
-
-	writel(value, &bank->pull);
-}
-
-void gpio_set_drv(int gpio, int mode)
-{
-	unsigned int value;
-	struct gpio_bank *bank = gpio_get_bank(gpio);
-
-	value = readl(&bank->drv);
-	value &= ~DRV_MASK(GPIO_BIT(gpio));
-
-	switch (mode) {
-	case GPIO_DRV_1X:
-	case GPIO_DRV_2X:
-	case GPIO_DRV_3X:
-	case GPIO_DRV_4X:
-		value |= DRV_SET(GPIO_BIT(gpio), mode);
-		break;
-	default:
-		return;
-	}
-
-	writel(value, &bank->drv);
-}
-
-void gpio_set_rate(int gpio, int mode)
-{
-	unsigned int value;
-	struct gpio_bank *bank = gpio_get_bank(gpio);
-
-	value = readl(&bank->drv);
-	value &= ~RATE_MASK(GPIO_BIT(gpio));
-
-	switch (mode) {
-	case GPIO_DRV_FAST:
-	case GPIO_DRV_SLOW:
-		value |= RATE_SET(GPIO_BIT(gpio));
-		break;
-	default:
-		return;
-	}
-
-	writel(value, &bank->drv);
-}
-
-int gpio_direction_input(unsigned gpio)
-{
-	gpio_cfg_pin(gpio, GPIO_INPUT);
-
-	return 0;
-}
-
-int gpio_direction_output(unsigned gpio, int value)
-{
-	unsigned int val;
-	struct gpio_bank *bank = gpio_get_bank(gpio);
-
-	val = readl(&bank->dat);
-	val &= ~DAT_MASK(GPIO_BIT(gpio));
-	if (value)
-		val |= DAT_SET(GPIO_BIT(gpio));
-	writel(val, &bank->dat);
-
-	gpio_cfg_pin(gpio, GPIO_OUTPUT);
-
-	return 0;
-}
-
-int gpio_get_value(unsigned gpio)
-{
-	unsigned int value;
-	struct gpio_bank *bank = gpio_get_bank(gpio);
-
-	value = readl(&bank->dat);
-	return !!(value & DAT_MASK(GPIO_BIT(gpio)));
-}
-
-int gpio_set_value(unsigned gpio, int value)
-{
-	unsigned int val;
-	struct gpio_bank *bank = gpio_get_bank(gpio);
-
-	val = readl(&bank->dat);
-	val &= ~DAT_MASK(GPIO_BIT(gpio));
-	if (value)
-		val |= DAT_SET(GPIO_BIT(gpio));
-	writel(val, &bank->dat);
-
-	return 0;
-}
-
-/*
- * Add a delay here to give the lines time to settle
- * TODO(dianders): 5us does not always work, 10 is stable, so use 15 to be safe
- * Come back to this and sort out what the datasheet says
- */
-#define GPIO_DELAY_US	15
-
-#ifndef __BOOT_BLOCK__
-/*
- * FIXME(dhendrix): These functions use udelay, which has dependencies on
- * pwm code and timer code. These aren't necessary for the bootblock and
- * bloat the image significantly.
- */
-int gpio_read_mvl3(unsigned gpio)
-{
-	int high, low;
-	enum mvl3 value;
-
-	if (gpio >= GPIO_MAX_PORT)
-		return -1;
-
-	gpio_direction_input(gpio);
-	gpio_set_pull(gpio, GPIO_PULL_UP);
-	udelay(GPIO_DELAY_US);
-	high = gpio_get_value(gpio);
-	gpio_set_pull(gpio, GPIO_PULL_DOWN);
-	udelay(GPIO_DELAY_US);
-	low = gpio_get_value(gpio);
-
-	if (high && low) /* external pullup */
-		value = LOGIC_1;
-	else if (!high && !low) /* external pulldown */
-		value = LOGIC_0;
-	else /* floating */
-		value = LOGIC_Z;
-
-	/*
-	 * Check if line is externally pulled high and
-	 * configure the internal pullup to match.  For
-	 * floating and pulldowns, the GPIO is already
-	 * configured with an internal pulldown from the
-	 * above test.
-	 */
-	if (value == LOGIC_1)
-		gpio_set_pull(gpio, GPIO_PULL_UP);
-
-	return value;
-}
-#endif	/* __BOOT_BLOCK__ */
-
-/*
- * Display Exynos GPIO information
- */
-void gpio_info(void)
-{
-	unsigned gpio;
-
-	for (gpio = 0; gpio < GPIO_MAX_PORT; gpio++) {
-		int cfg = gpio_get_cfg(gpio);
-
-		printk(BIOS_INFO, "GPIO_%-3d: ", gpio);
-		if (cfg == GPIO_INPUT)
-			printk(BIOS_INFO, "input");
-		else if (cfg == GPIO_OUTPUT)
-			printk(BIOS_INFO, "output");
-		else
-			printk(BIOS_INFO, "func %d", cfg);
-
-		if (cfg == GPIO_INPUT || cfg == GPIO_OUTPUT)
-			printk(BIOS_INFO, ", value = %d", gpio_get_value(gpio));
-		printk(BIOS_INFO, "\n");
-	}
-}