pit: Create an exynos5420 directory which is nearly a copy of exynos5250.

This change creates an exynos5420 directory with code that will eventually
implement support for the exynos5420 cpu from Samsung. Currently it's a copy
of the exynos5250 directory with the name changed. There are going to be some
problems where headers in src/cpu/samsung/exynos-common include headers in the
exynos5250 directory directly.

Change-Id: Ia8d7244310d32499238bbc171c0c668ec48178e1
Signed-off-by: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/3644
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>

1 files changed, 90 insertions, 0 deletions

diff --git a/src/cpu/samsung/exynos5420/power.h b/src/cpu/samsung/exynos5420/power.h
new file mode 100644
index 0000000000..3c019d6dc5
--- /dev/null
+++ b/src/cpu/samsung/exynos5420/power.h
@@ -0,0 +1,90 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* Register map for Exynos5 PMU */
+
+#ifndef CPU_SAMSUNG_EXYNOS5420_POWER_H
+#define CPU_SAMSUNG_EXYNOS5420_POWER_H
+
+/* Enable HW thermal trip with PS_HOLD_CONTROL register ENABLE_HW_TRIP bit */
+void power_enable_hw_thermal_trip(void);
+
+#define MIPI_PHY1_CONTROL_ENABLE		(1 << 0)
+#define MIPI_PHY1_CONTROL_M_RESETN		(1 << 2)
+
+#define POWER_USB_HOST_PHY_CTRL_EN		(1 << 0)
+#define POWER_PS_HOLD_CONTROL_DATA_HIGH		(1 << 8)
+#define POWER_ENABLE_HW_TRIP			(1UL << 31)
+
+#define DPTX_PHY_ENABLE		(1 << 0)
+
+/* PMU_DEBUG bits [12:8] = 0x1000 selects XXTI clock source */
+#define PMU_DEBUG_XXTI                          0x1000
+/* Mask bit[12:8] for xxti clock selection */
+#define PMU_DEBUG_CLKOUT_SEL_MASK               0x1f00
+
+/* Power Management Unit register map */
+struct exynos5_power {
+	/* Add registers as and when required */
+	uint8_t		reserved1[0x0400];
+	uint32_t	sw_reset;		/* 0x0400 */
+	uint8_t		reserved2[0x0304];
+	uint32_t	usb_host_phy_ctrl;	/* 0x0708 */
+	uint8_t		reserved3[0x8];
+	uint32_t	mipi_phy1_control;	/* 0x0714 */
+	uint8_t		reserved4[0x8];
+	uint32_t	dptx_phy_control;	/* 0x0720 */
+	uint8_t		reserved5[0xdc];
+	uint32_t	inform0;		/* 0x0800 */
+	uint32_t	inform1;		/* 0x0804 */
+	uint8_t		reserved6[0x1f8];
+	uint32_t	pmu_debug;		/* 0x0A00*/
+	uint8_t         reserved7[0x2908];
+	uint32_t	ps_hold_ctrl;		/* 0x330c */
+} __attribute__ ((__packed__));
+
+/**
+ * Perform a software reset.
+ */
+void power_reset(void);
+
+/**
+ * Power off the system; it should never return.
+ */
+void power_shutdown(void);
+
+/* Enable DPTX PHY */
+void power_enable_dp_phy(void);
+
+void power_enable_usb_phy(void);
+void power_disable_usb_phy(void);
+
+/* Initialize the pmic voltages to power up the system */
+int power_init(void);
+
+/* Read the reset status. */
+uint32_t power_read_reset_status(void);
+
+/* Read the resume function and call it. */
+void power_exit_wakeup(void);
+
+/* pmu debug is used for xclkout, enable xclkout with source as XXTI */
+void power_enable_xclkout(void);
+
+#endif