summaryrefslogtreecommitdiff
path: root/src/cpu
diff options
context:
space:
mode:
authorDavid Hendricks <dhendrix@chromium.org>2013-08-20 17:13:01 -0700
committerIsaac Christensen <isaac.christensen@se-eng.com>2014-08-12 22:01:48 +0200
commit2f3daddd28c95a134f2543e366f8ee9dd8d2be41 (patch)
treee36577aa89aa17d9418914988142faf19797322c /src/cpu
parentad4556f2cb429d921a9e00e3937797ea6f6f4cd8 (diff)
downloadcoreboot-2f3daddd28c95a134f2543e366f8ee9dd8d2be41.tar.xz
exynos5420: Alter init sequence as per recommendation
As per hardware recommendation, CKE PAD retention release must happen just before gate leveling enable and only in case of resume. Hence, this patch moves pad retention release from dmc_common.c to dmc_init_ddr3_exynos5420.c. In addition to this we are providing 125 (+3 extra being safe) times auto refresh to DRAM by sending REFA direct command. This is required because when CKE PAD retention release happens, self refresh mode of DDR3 is disabled. Hence, auto refresh 125 times. This is ported from https://gerrit.chromium.org/gerrit/#/c/65573 Note: Since WAKEUP_DIRECT does not go thru memory init, it should be safe to move CKE PAD retention out of bootblock.c. Signed-off-by: David Hendricks <dhendrix@chromium.org> Change-Id: Idec5d6fbbe3c6344d47401ba7203079c52a9b866 Reviewed-on: https://gerrit.chromium.org/gerrit/66788 Commit-Queue: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> (cherry picked from commit 96cbcb09245d4df92d3e1998704ab440be42df25) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6604 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Diffstat (limited to 'src/cpu')
-rw-r--r--src/cpu/samsung/exynos5420/bootblock.c17
-rw-r--r--src/cpu/samsung/exynos5420/dmc_init_ddr3.c39
-rw-r--r--src/cpu/samsung/exynos5420/setup.h1
3 files changed, 35 insertions, 22 deletions
diff --git a/src/cpu/samsung/exynos5420/bootblock.c b/src/cpu/samsung/exynos5420/bootblock.c
index 1ad75ef493..2c42b03ce7 100644
--- a/src/cpu/samsung/exynos5420/bootblock.c
+++ b/src/cpu/samsung/exynos5420/bootblock.c
@@ -31,23 +31,6 @@
void bootblock_cpu_init(void);
void bootblock_cpu_init(void)
{
- u32 ret;
- /*
- * During Suspend-Resume & S/W-Reset, as soon as PMU releases
- * pad retention, CKE goes high. This causes memory contents
- * not to be retained during DRAM initialization. Therfore,
- * there is a new control register(0x100431e8[28]) which lets us
- * release pad retention and retain the memory content until the
- * initialization is complete.
- */
- if (read32(((void *)INF_REG_BASE + INF_REG1_OFFSET)) == S5P_CHECK_SLEEP) {
- write32(PAD_RETENTION_DRAM_COREBLK_VAL,
- (void *)PAD_RETENTION_DRAM_COREBLK_OPTION);
- do {
- ret = read32((void *)PAD_RETENTION_DRAM_STATUS);
- } while (ret != 0x1);
- }
-
/* kick off the multi-core timer.
* We want to do this as early as we can.
*/
diff --git a/src/cpu/samsung/exynos5420/dmc_init_ddr3.c b/src/cpu/samsung/exynos5420/dmc_init_ddr3.c
index 6c431f374f..0a4edc848b 100644
--- a/src/cpu/samsung/exynos5420/dmc_init_ddr3.c
+++ b/src/cpu/samsung/exynos5420/dmc_init_ddr3.c
@@ -184,14 +184,43 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
writel(mem->timing_power, &drex0->timingpower);
writel(mem->timing_power, &drex1->timingpower);
- /* Send NOP, MRS and ZQINIT commands.
- * Sending MRS command will reset the DRAM. We should not be
- * reseting the DRAM after resume, this will lead to memory
- * corruption as DRAM content is lost after DRAM reset.
- */
if (reset) {
+ /* Send NOP, MRS and ZQINIT commands.
+ * Sending MRS command will reset the DRAM. We should not be
+ * reseting the DRAM after resume, this will lead to memory
+ * corruption as DRAM content is lost after DRAM reset.
+ */
dmc_config_mrs(mem, drex0);
dmc_config_mrs(mem, drex1);
+ } else {
+ u32 ret;
+
+ /*
+ * During Suspend-Resume & S/W-Reset, as soon as PMU releases
+ * pad retention, CKE goes high. This causes memory contents
+ * not to be retained during DRAM initialization. Therfore,
+ * there is a new control register(0x100431e8[28]) which lets us
+ * release pad retention and retain the memory content until the
+ * initialization is complete.
+ */
+ write32(PAD_RETENTION_DRAM_COREBLK_VAL,
+ (void *)PAD_RETENTION_DRAM_COREBLK_OPTION);
+ do {
+ ret = read32((void *)PAD_RETENTION_DRAM_STATUS);
+ } while (ret != 0x1);
+
+ /*
+ * CKE PAD retention disables DRAM self-refresh mode.
+ * Send auto refresh command for DRAM refresh.
+ */
+ for (i = 0; i < 128; i++) {
+ writel(DIRECT_CMD_REFA, &drex0->directcmd);
+ writel(DIRECT_CMD_REFA | (0x1 << DIRECT_CMD_CHIP_SHIFT),
+ &drex0->directcmd);
+ writel(DIRECT_CMD_REFA, &drex1->directcmd);
+ writel(DIRECT_CMD_REFA | (0x1 << DIRECT_CMD_CHIP_SHIFT),
+ &drex1->directcmd);
+ }
}
if (mem->gate_leveling_enable) {
diff --git a/src/cpu/samsung/exynos5420/setup.h b/src/cpu/samsung/exynos5420/setup.h
index ca7281dd82..9dc49d8d10 100644
--- a/src/cpu/samsung/exynos5420/setup.h
+++ b/src/cpu/samsung/exynos5420/setup.h
@@ -715,6 +715,7 @@ struct exynos5_phy_control;
#define DIRECT_CMD_ZQINIT 0x0a000000
#define DIRECT_CMD_CHANNEL_SHIFT 28
#define DIRECT_CMD_CHIP_SHIFT 20
+#define DIRECT_CMD_BANK_SHIFT 16
#define DIRECT_CMD_REFA (5 << 24)
#define DIRECT_CMD_MRS1 0x71C00
#define DIRECT_CMD_MRS2 0x10BFC