summaryrefslogtreecommitdiff
path: root/src/cpu
diff options
context:
space:
mode:
authorHung-Te Lin <hungte@chromium.org>2013-02-06 17:48:20 +0800
committerStefan Reinauer <stefan.reinauer@coreboot.org>2013-02-06 22:09:01 +0100
commit439e0d2502bb0c38f7e7bf876dd5568331c6fe9c (patch)
treef030aaf331d0682649ea8e29bc834e1f14b0c477 /src/cpu
parent23b5afe565b80387b2587c11493d0198794b1533 (diff)
downloadcoreboot-439e0d2502bb0c38f7e7bf876dd5568331c6fe9c.tar.xz
armv7: Clean up: remove deprecated SPL.
"SPL" from U-Boot is deprecated by bootblock in coreboot/arm, so we don't need it anymore. Change-Id: Id16877075d0b870839a10160073ad70777a2af0a Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2297 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Diffstat (limited to 'src/cpu')
-rw-r--r--src/cpu/samsung/exynos5-common/spl.h94
-rw-r--r--src/cpu/samsung/exynos5-common/spl_boot.c447
-rw-r--r--src/cpu/samsung/exynos5250/Kconfig4
-rw-r--r--src/cpu/samsung/exynos5250/clk.h3
-rw-r--r--src/cpu/samsung/exynos5250/clock_init.c2
-rw-r--r--src/cpu/samsung/exynos5250/dmc_common.c2
-rw-r--r--src/cpu/samsung/exynos5250/power.c4
-rw-r--r--src/cpu/samsung/s5p-common/cpu_info.c2
-rw-r--r--src/cpu/samsung/s5p-common/s5p_gpio.c2
-rw-r--r--src/cpu/samsung/s5p-common/timer.c3
10 files changed, 5 insertions, 558 deletions
diff --git a/src/cpu/samsung/exynos5-common/spl.h b/src/cpu/samsung/exynos5-common/spl.h
deleted file mode 100644
index afa9a8e909..0000000000
--- a/src/cpu/samsung/exynos5-common/spl.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Copyright (c) 2012 The Chromium OS Authors.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_EXYNOS_SPL_H__
-#define __ASM_ARCH_EXYNOS_SPL_H__
-
-#include <cpu/samsung/exynos5-common/cpu.h>
-/* FIXME(dhendrix): non-common header included by a common header... */
-#include <cpu/samsung/exynos5250/dmc.h>
-
-/* Parameters of early board initialization in SPL */
-struct spl_machine_param {
- /* Add fields as and when required */
- u32 signature;
- u32 version; /* Version number */
- u32 size; /* Size of block */
- /**
- * Parameters we expect, in order, terminated with \0. Each parameter
- * is a single character representing one 32-bit word in this
- * structure.
- *
- * Valid characters in this string are:
- *
- * Code Name
- * v mem_iv_size
- * m mem_type
- * u uboot_size
- * b boot_source
- * f frequency_mhz (memory frequency in MHz)
- * a ARM clock frequency in MHz
- * s serial base address
- * i i2c base address for early access (meant for PMIC)
- * r board rev GPIO numbers used to read board revision
- * (lower halfword=bit 0, upper=bit 1)
- * M Memory Manufacturer name
- * w Bad Wake GPIO number
- * \0 termination
- */
- char params[12]; /* Length must be word-aligned */
- u32 mem_iv_size; /* Memory channel interleaving size */
- enum ddr_mode mem_type; /* Type of on-board memory */
- /*
- * U-boot size - The iROM mmc copy function used by the SPL takes a
- * block count paramter to describe the u-boot size unlike the spi
- * boot copy function which just uses the u-boot size directly. Align
- * the u-boot size to block size (512 bytes) when populating the SPL
- * table only for mmc boot.
- */
- u32 uboot_size;
- enum boot_mode boot_source; /* Boot device */
- unsigned frequency_mhz; /* Frequency of memory in MHz */
- unsigned arm_freq_mhz; /* ARM Frequency in MHz */
- u32 serial_base; /* Serial base address */
- u32 i2c_base; /* i2c base address */
- u32 board_rev_gpios; /* Board revision GPIOs */
- enum mem_manuf mem_manuf; /* Memory Manufacturer */
- u32 bad_wake_gpio; /* If high at wake time disallow wake */
-} __attribute__((__packed__));
-
-/**
- * Validate signature and return a pointer to the parameter table. If the
- * signature is invalid, call panic() and never return.
- *
- * @return pointer to the parameter table if signature matched or never return.
- */
-struct spl_machine_param *spl_get_machine_params(void);
-
-/*
- * Initialize the timer and serial driver in SPL u-boot.
- * Besides the serial driver, it also setup the minimal set of its dependency,
- * like gd struct, pinmux, and serial.
- */
-void spl_early_init(void);
-
-#endif /* __ASM_ARCH_EXYNOS_SPL_H__ */
diff --git a/src/cpu/samsung/exynos5-common/spl_boot.c b/src/cpu/samsung/exynos5-common/spl_boot.c
deleted file mode 100644
index ddf69372ef..0000000000
--- a/src/cpu/samsung/exynos5-common/spl_boot.c
+++ /dev/null
@@ -1,447 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* FIXME(dhendrix): pulled in a lot of extra crap such as partition and string
- libs*/
-#include <assert.h>
-#include <common.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include <console/console.h>
-#include <console/loglevel.h>
-//#include <asm/arch/board.h>
-
-#include <config.h>
-#include <spi.h>
-#if 0
-#include <asm/arch/clock.h>
-#include <asm/arch-exynos/spi.h>
-#include <asm/arch/pinmux.h>
-#include <asm/arch/power.h>
-#endif
-#include <arch/hlt.h>
-#include <cpu/samsung/exynos5250/clk.h>
-#include <cpu/samsung/exynos5250/cpu.h>
-#include <cpu/samsung/exynos5250/periph.h>
-#include <cpu/samsung/exynos5250/pinmux.h>
-#include <cpu/samsung/exynos5250/power.h>
-#include <cpu/samsung/exynos5250/spi.h>
-
-#include <cpu/samsung/exynos5-common/cpu.h>
-#include <cpu/samsung/exynos5-common/exynos5-common.h>
-
-//#include <asm/system.h>
-#include <system.h>
-
-#include <arch/io.h>
-
-#define OM_STAT (0x1f << 1)
-
-/**
- * Copy data from SD or MMC device to RAM.
- *
- * @param offset Block offset of the data
- * @param nblock Number of blocks
- * @param dst Destination address
- * @return 1 = True or 0 = False
- */
-typedef u32 (*mmc_copy_func_t)(u32 offset, u32 nblock, u32 dst);
-
-/**
- * Copy data from SPI flash to RAM.
- *
- * @param offset Block offset of the data
- * @param nblock Number of blocks
- * @param dst Destination address
- * @return 1 = True or 0 = False
- */
-typedef u32 (*spi_copy_func_t)(u32 offset, u32 nblock, u32 dst);
-
-
-/**
- * Copy data through USB.
- *
- * @return 1 = True or 0 = False
- */
-typedef u32 (*usb_copy_func_t)(void);
-
-/*
- * Set/clear program flow prediction and return the previous state.
- */
-static int config_branch_prediction(int set_cr_z)
-{
- unsigned int cr;
-
- /* System Control Register: 11th bit Z Branch prediction enable */
- cr = get_cr();
- set_cr(set_cr_z ? cr | CR_Z : cr & ~CR_Z);
-
- return cr & CR_Z;
-}
-
-#if 0
-static void spi_rx_tx(struct exynos_spi *regs, int todo,
- void *dinp, void const *doutp, int i)
-{
- uint *rxp = (uint *)(dinp + (i * (32 * 1024)));
- int rx_lvl, tx_lvl;
- uint out_bytes, in_bytes;
-
- out_bytes = in_bytes = todo;
- setbits_le32(&regs->ch_cfg, SPI_CH_RST);
- clrbits_le32(&regs->ch_cfg, SPI_CH_RST);
- writel(((todo * 8) / 32) | SPI_PACKET_CNT_EN, &regs->pkt_cnt);
-
- while (in_bytes) {
- uint32_t spi_sts;
- int temp;
-
- spi_sts = readl(&regs->spi_sts);
- rx_lvl = ((spi_sts >> 15) & 0x7f);
- tx_lvl = ((spi_sts >> 6) & 0x7f);
- while (tx_lvl < 32 && out_bytes) {
- temp = 0xffffffff;
- writel(temp, &regs->tx_data);
- out_bytes -= 4;
- tx_lvl += 4;
- }
- while (rx_lvl >= 4 && in_bytes) {
- temp = readl(&regs->rx_data);
- if (rxp)
- *rxp++ = temp;
- in_bytes -= 4;
- rx_lvl -= 4;
- }
- }
-}
-#endif
-
-/* FIXME(dhendrix): feels like exynos_spi_copy should go somewhere else... */
-#if 0
-/**
- * Copy uboot from spi flash to RAM
- *
- * @parma uboot_size size of u-boot to copy
- */
-static void exynos_spi_copy(unsigned int uboot_size)
-{
- int upto, todo;
- int i;
-// struct exynos_spi *regs = (struct exynos_spi *)samsung_get_base_spi1();
- struct exynos_spi *regs = (struct exynos_spi *)0x12d30000;
-
- clock_set_rate(PERIPH_ID_SPI1, 50000000); /* set spi clock to 50Mhz */
- /* set the spi1 GPIO */
- exynos_pinmux_config(PERIPH_ID_SPI1, PINMUX_FLAG_NONE);
-
- /* set pktcnt and enable it */
- writel(4 | SPI_PACKET_CNT_EN, &regs->pkt_cnt);
- /* set FB_CLK_SEL */
- writel(SPI_FB_DELAY_180, &regs->fb_clk);
- /* set CH_WIDTH and BUS_WIDTH as word */
- setbits_le32(&regs->mode_cfg, SPI_MODE_CH_WIDTH_WORD |
- SPI_MODE_BUS_WIDTH_WORD);
- clrbits_le32(&regs->ch_cfg, SPI_CH_CPOL_L); /* CPOL: active high */
-
- /* clear rx and tx channel if set priveously */
- clrbits_le32(&regs->ch_cfg, SPI_RX_CH_ON | SPI_TX_CH_ON);
-
- setbits_le32(&regs->swap_cfg, SPI_RX_SWAP_EN |
- SPI_RX_BYTE_SWAP |
- SPI_RX_HWORD_SWAP);
-
- /* do a soft reset */
- setbits_le32(&regs->ch_cfg, SPI_CH_RST);
- clrbits_le32(&regs->ch_cfg, SPI_CH_RST);
-
- /* now set rx and tx channel ON */
- setbits_le32(&regs->ch_cfg, SPI_RX_CH_ON | SPI_TX_CH_ON | SPI_CH_HS_EN);
- clrbits_le32(&regs->cs_reg, SPI_SLAVE_SIG_INACT); /* CS low */
-
- /* Send read instruction (0x3h) followed by a 24 bit addr */
- writel((SF_READ_DATA_CMD << 24) | SPI_FLASH_UBOOT_POS, &regs->tx_data);
-
- /* waiting for TX done */
- while (!(readl(&regs->spi_sts) & SPI_ST_TX_DONE));
-
- for (upto = 0, i = 0; upto < uboot_size; upto += todo, i++) {
- todo = MIN(uboot_size - upto, (1 << 15));
- spi_rx_tx(regs, todo, (void *)(CONFIG_SYS_TEXT_BASE),
- (void *)(SPI_FLASH_UBOOT_POS), i);
- }
-
- setbits_le32(&regs->cs_reg, SPI_SLAVE_SIG_INACT);/* make the CS high */
-
- /*
- * Let put controller mode to BYTE as
- * SPI driver does not support WORD mode yet
- */
- clrbits_le32(&regs->mode_cfg, SPI_MODE_CH_WIDTH_WORD |
- SPI_MODE_BUS_WIDTH_WORD);
- writel(0, &regs->swap_cfg);
-
- /*
- * Flush spi tx, rx fifos and reset the SPI controller
- * and clear rx/tx channel
- */
- clrsetbits_le32(&regs->ch_cfg, SPI_CH_HS_EN, SPI_CH_RST);
- clrbits_le32(&regs->ch_cfg, SPI_CH_RST);
- clrbits_le32(&regs->ch_cfg, SPI_TX_CH_ON | SPI_RX_CH_ON);
-}
-#endif
-
-/* Copy U-Boot image to RAM */
-static void copy_uboot_to_ram(void)
-{
- unsigned int sec_boot_check;
- unsigned int uboot_size = CONFIG_COREBOOT_ROMSIZE_KB_4096;
- int is_cr_z_set;
- enum boot_mode boot_mode = BOOT_MODE_OM;
- mmc_copy_func_t mmc_copy;
-
- usb_copy_func_t usb_copy;
-
-#if 0
- uboot_size = exynos_get_uboot_size();
- boot_mode = exynos_get_boot_device();
-#endif
-
- if (boot_mode == BOOT_MODE_OM) {
- /* Read iRAM location to check for secondary USB boot mode */
- sec_boot_check = readl(EXYNOS_IRAM_SECONDARY_BASE);
- if (sec_boot_check == EXYNOS_USB_SECONDARY_BOOT)
- boot_mode = BOOT_MODE_USB;
- }
- debug("U-Boot size %u\n", uboot_size);
-
- if (boot_mode == BOOT_MODE_OM)
- boot_mode = readl(EXYNOS_POWER_BASE) & OM_STAT;
-
- switch (boot_mode) {
-#if defined(CONFIG_EXYNOS_SPI_BOOT)
- case BOOT_MODE_SERIAL:
- /* let us our own function to copy u-boot from SF */
- exynos_spi_copy(uboot_size);
- break;
-#endif
- case BOOT_MODE_MMC:
- mmc_copy = *(mmc_copy_func_t *)EXYNOS_COPY_MMC_FNPTR_ADDR;
- assert(!(uboot_size & 511));
- mmc_copy(BL2_START_OFFSET, uboot_size / 512,
- CONFIG_SYS_TEXT_BASE);
- break;
- case BOOT_MODE_USB:
- /*
- * iROM needs program flow prediction to be disabled
- * before copy from USB device to RAM
- */
- is_cr_z_set = config_branch_prediction(0);
- usb_copy = *(usb_copy_func_t *)
- EXYNOS_COPY_USB_FNPTR_ADDR;
- usb_copy();
- config_branch_prediction(is_cr_z_set);
- break;
- default:
- printk(BIOS_ERR, "Invalid boot mode selection\n");
- hlt();
- break;
- }
- debug("U-Boot copied\n");
-}
-
-#if 0
-/**
- * Set up the U-Boot global_data pointer
- *
- * This sets the address of the global data, and sets up basic values.
- *
- * @param gdp Value to give to gd
- */
-static void setup_global_data(gd_t *gdp)
-{
- gd = gdp;
- memzero((void *)gd, sizeof(gd_t));
- gd->flags |= GD_FLG_RELOC;
- gd->baudrate = CONFIG_BAUDRATE;
- gd->have_console = 1;
-}
-#endif
-
-#if 0
-/* Tell the loaded U-Boot that it was loaded from SPL */
-static void exynos5_set_spl_marker(void)
-{
- uint32_t *marker = (uint32_t *)CONFIG_SPL_MARKER;
-
- *marker = EXYNOS5_SPL_MARKER;
-}
-#endif
-
-/* Board-specific call to see if wakeup is allowed. */
-static int __def_board_wakeup_permitted(void)
-{
- return 1;
-}
-int board_wakeup_permitted(void)
- __attribute__((weak, alias("__def_board_wakeup_permitted")));
-
-void board_init_f(void)
-{
- /*
- * The gd struct is only needed for serial initialization. Since this
- * function is called in SPL u-boot. We store the gd struct in the
- * stack instead of the default memory region which may not be
- * initialized.
- */
-// __attribute__((aligned(8))) gd_t local_gd;
-// __attribute__((noreturn)) void (*uboot)(void);
-
-// exynos5_set_spl_marker();
-// setup_global_data(&local_gd);
-
- /*
- * Init subsystems, and resume if required. For a normal boot this
- * will set up the UART and display a message.
- */
- if (lowlevel_init_subsystems()) {
- if (!board_wakeup_permitted())
- power_reset();
- power_exit_wakeup();
- }
-
-// printk(BIOS_INFO, "\n\nU-Boot SPL, board rev %u\n", board_get_revision());
-
- copy_uboot_to_ram();
- /* Jump to U-Boot image */
-// uboot = (void *)CONFIG_SYS_TEXT_BASE;
-// uboot();
- /* Never returns Here */
-// printk(BIOS_ERR, "%s: u-boot jump failed", __func__);
- printk(BIOS_INFO, "%s: we should not be here...", __func__);
- hlt();
-}
-
-//void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3) {}
-
-#if 0
-/*
- * The following functions are required when linking console library to SPL.
- *
- * Enabling UART in SPL u-boot requires console library. But some
- * functions we needed in the console library depends on a bunch
- * of library in libgeneric, like lib/ctype.o, lib/div64.o, lib/string.o,
- * and lib/vsprintf.o. Adding them makes the SPL u-boot too large and not
- * fit into the expected size.
- *
- * So we mock these functions in SPL, i.e. vsprintf(), panic(), etc.,
- * in order to cut its dependency.
- */
-int vsprintf(char *buf, const char *fmt, va_list args)
-{
- char *str = buf, *s;
- ulong u;
-
- /*
- * We won't implement all full functions of vsprintf().
- * We only implement %s and %u, and ignore others and directly use
- * the original format string as its result.
- */
-
- while (*fmt) {
- if (*fmt != '%') {
- *str++ = *fmt++;
- continue;
- }
- fmt++;
- switch (*fmt) {
- case '%':
- *str++ = *fmt++;
- break;
- case 's':
- fmt++;
- s = va_arg(args, char *);
- while (*s)
- *str++ = *s++;
- break;
- case 'u':
- fmt++;
- u = va_arg(args, ulong);
- s = simple_itoa(u);
- while (*s)
- *str++ = *s++;
- break;
- default:
- /* Print the original string for unsupported formats */
- *str++ = '%';
- *str++ = *fmt++;
- }
- }
- *str = '\0';
- return str - buf;
-}
-#endif
-
-#if 0
-void panic(const char *fmt, ...)
-{
- va_list args;
- va_start(args, fmt);
- vprintf(fmt, args);
- putc('\n');
- va_end(args);
-#if defined(CONFIG_PANIC_HANG)
- hang();
-#else
- udelay(100000); /* allow messages to go out */
- do_reset(NULL, 0, 0, NULL);
-#endif
- while (1)
- ;
-}
-#endif
-
-#if 0
-void __assert_fail(const char *assertion, const char *file, unsigned line,
- const char *function)
-{
- /* This will not return */
- panic("%s:%u: %s: Assertion `%s' failed.", file, line, function,
- assertion);
-}
-#endif
-
-#if 0
-char *simple_itoa(ulong i)
-{
- /* 21 digits plus null terminator, good for 64-bit or smaller ints */
- static char local[22] __attribute__((section(".data")));
- char *p = &local[21];
-
- *p-- = '\0';
- do {
- *p-- = '0' + i % 10;
- i /= 10;
- } while (i > 0);
- return p + 1;
-}
-#endif
diff --git a/src/cpu/samsung/exynos5250/Kconfig b/src/cpu/samsung/exynos5250/Kconfig
index 6a09d88e1b..0b07b90a63 100644
--- a/src/cpu/samsung/exynos5250/Kconfig
+++ b/src/cpu/samsung/exynos5250/Kconfig
@@ -88,10 +88,6 @@ config SYS_SDRAM_BASE
hex "SDRAM base address"
default 0x40000000
-config SPL_BUILD
- bool
- default n
-
config SYS_TEXT_BASE
hex "Executable code section"
default 0x43e00000
diff --git a/src/cpu/samsung/exynos5250/clk.h b/src/cpu/samsung/exynos5250/clk.h
index 2de949aecb..dbddce0c6d 100644
--- a/src/cpu/samsung/exynos5250/clk.h
+++ b/src/cpu/samsung/exynos5250/clk.h
@@ -564,8 +564,6 @@ const char *clock_get_mem_manuf_name(enum mem_manuf mem_manuf);
* At present we are using 14148 of 14336 bytes. If we change this function
* to be exported in SPL, we go over the edge.
*/
-/* TODO(dhendrix): do we still need this ifndef? */
-//#ifndef CONFIG_SPL_BUILD
/**
* Get the required memory type and speed (Main U-Boot version).
*
@@ -581,6 +579,5 @@ const char *clock_get_mem_manuf_name(enum mem_manuf mem_manuf);
int clock_get_mem_selection(enum ddr_mode *mem_type,
unsigned *frequency_mhz, unsigned *arm_freq,
enum mem_manuf *mem_manuf);
-//#endif /* CONFIG_SPL_BUILD */
#endif
diff --git a/src/cpu/samsung/exynos5250/clock_init.c b/src/cpu/samsung/exynos5250/clock_init.c
index 4f21022fd1..27e96ae318 100644
--- a/src/cpu/samsung/exynos5250/clock_init.c
+++ b/src/cpu/samsung/exynos5250/clock_init.c
@@ -452,7 +452,6 @@ void clock_init_dp_clock(void)
setbits_le32(&clk->div_disp1_0, CLK_DIV_DISP1_0_FIMD1);
}
-#ifdef CONFIG_SPL_BUILD
/*
* This is a custom implementation for the udelay(), as we do not the timer
* initialise during the SPL boot. We are assuming the cpu takes 3 instruction
@@ -466,4 +465,3 @@ void udelay(unsigned usec)
count = usec * (get_pll_clk(APLL) / (3 * 10000000));
sdelay(count);
}
-#endif
diff --git a/src/cpu/samsung/exynos5250/dmc_common.c b/src/cpu/samsung/exynos5250/dmc_common.c
index f91cbb357f..8c4b583a9e 100644
--- a/src/cpu/samsung/exynos5250/dmc_common.c
+++ b/src/cpu/samsung/exynos5250/dmc_common.c
@@ -22,13 +22,13 @@
* MA 02111-1307 USA
*/
+#include <arch/io.h>
#include <assert.h>
#include <common.h>
#include <console/console.h>
#include <cpu/samsung/exynos5250/setup.h>
#include <cpu/samsung/exynos5250/dmc.h>
#include <cpu/samsung/exynos5250/clock_init.h>
-#include <cpu/samsung/exynos5-common/spl.h>
#include <system.h>
#include "clock_init.h"
diff --git a/src/cpu/samsung/exynos5250/power.c b/src/cpu/samsung/exynos5250/power.c
index 7c61655676..60003c4aad 100644
--- a/src/cpu/samsung/exynos5250/power.c
+++ b/src/cpu/samsung/exynos5250/power.c
@@ -23,12 +23,12 @@
*/
#include <common.h>
+#include <arch/hlt.h>
#include <arch/io.h>
#include <console/console.h>
#include <cpu/samsung/exynos5250/cpu.h>
#include <cpu/samsung/exynos5250/power.h>
#include <cpu/samsung/exynos5250/sysreg.h>
-#include <cpu/samsung/exynos5-common/spl.h>
#include <drivers/maxim/max77686/max77686.h>
#include "device/i2c.h"
@@ -62,7 +62,7 @@ void power_shutdown(void)
clrbits_le32(&power->ps_hold_ctrl, POWER_PS_HOLD_CONTROL_DATA_HIGH);
- hang();
+ hlt();
}
void power_enable_dp_phy(void)
diff --git a/src/cpu/samsung/s5p-common/cpu_info.c b/src/cpu/samsung/s5p-common/cpu_info.c
index 6b4742ec21..1c4c49f2a6 100644
--- a/src/cpu/samsung/s5p-common/cpu_info.c
+++ b/src/cpu/samsung/s5p-common/cpu_info.c
@@ -92,7 +92,7 @@ int print_cpuinfo(void)
}
#endif
-#ifndef CONFIG_SPL_BUILD
+#if 0
void board_show_dram(ulong size)
{
enum ddr_mode mem_type;
diff --git a/src/cpu/samsung/s5p-common/s5p_gpio.c b/src/cpu/samsung/s5p-common/s5p_gpio.c
index 0023beb141..e91b9df650 100644
--- a/src/cpu/samsung/s5p-common/s5p_gpio.c
+++ b/src/cpu/samsung/s5p-common/s5p_gpio.c
@@ -95,9 +95,7 @@ static struct s5p_gpio_bank *gpio_get_bank(unsigned int gpio)
}
}
-#ifndef CONFIG_SPL_BUILD
assert(gpio < GPIO_MAX_PORT); /* ...which it will not be */
-#endif
return NULL;
}
//#endif
diff --git a/src/cpu/samsung/s5p-common/timer.c b/src/cpu/samsung/s5p-common/timer.c
index 373c3741d2..c6ed83008d 100644
--- a/src/cpu/samsung/s5p-common/timer.c
+++ b/src/cpu/samsung/s5p-common/timer.c
@@ -67,7 +67,7 @@ int init_timer(void)
pwm_init(4, MUX_DIV_4, 0);
pwm_config(4, 100000, 100000);
pwm_enable(4);
-#ifndef CONFIG_SPL_BUILD
+
/* Use this as the current monotonic time in us */
//gd->timer_reset_value = 0;
timer_reset_value = 0;
@@ -75,7 +75,6 @@ int init_timer(void)
/* Use this as the last timer value we saw */
//gd->lastinc = timer_get_us_down();
lastinc = timer_get_us_down();
-#endif
}
return 0;