summaryrefslogtreecommitdiff
path: root/src/cpu
diff options
context:
space:
mode:
authorAlexandru Gagniuc <mr.nuke.me@gmail.com>2013-12-28 19:29:36 -0500
committerAlexandru Gagniuc <mr.nuke.me@gmail.com>2014-01-14 14:14:58 +0100
commit601b5b530206d7d920036a4274954cc7a8beacd7 (patch)
treed34f90268b0e9065b61a33df4890fd8fcbb4c3ce /src/cpu
parent594ef813266053a7d6777b91be7724ee5b62ff7a (diff)
downloadcoreboot-601b5b530206d7d920036a4274954cc7a8beacd7.tar.xz
cpu/allwinner/a10: Add helper to configure CPU clock
Change-Id: I5a3bb3220aeefdd6822a7dbecf210ff77095dad6 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/4685 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Diffstat (limited to 'src/cpu')
-rw-r--r--src/cpu/allwinner/a10/clock.c155
-rw-r--r--src/cpu/allwinner/a10/clock.h3
2 files changed, 158 insertions, 0 deletions
diff --git a/src/cpu/allwinner/a10/clock.c b/src/cpu/allwinner/a10/clock.c
index 0401a72be4..945dfd767b 100644
--- a/src/cpu/allwinner/a10/clock.c
+++ b/src/cpu/allwinner/a10/clock.c
@@ -8,6 +8,10 @@
#include "clock.h"
#include <arch/io.h>
+#include <console/console.h>
+#include <delay.h>
+#include <lib.h>
+#include <stdlib.h>
static struct a10_ccm *const ccm = (void *)A1X_CCM_BASE;
@@ -121,3 +125,154 @@ void a1x_gate_dram_clock_output(void)
{
clrbits_le32(&ccm->dram_clk_cfg, DRAM_CTRL_DCLK_OUT);
}
+
+/*
+ * Linker doesn't garbage collect and the function below adds about half
+ * kilobyte to the bootblock, and log2_ceil is not available in the bootblock.
+ */
+#ifndef __BOOT_BLOCK__
+
+#define PLL1_CFG(N, K, M, P_EXP) \
+ ((1 << 31 | 0 << 30 | 8 << 26 | 0 << 25 | 16 << 20 | 2 << 13) | \
+ (P_EXP) << 16 | (N) << 8 | \
+ (K - 1) << 4 | 0 << 3 | 0 << 2 | (M -1) << 0)
+
+static const struct {
+ u32 pll1_cfg;
+ u16 freq_mhz;
+} pll1_table[] = {
+ /* PLL1 output = (24MHz * N * K) / (M * P) */
+ { PLL1_CFG(16, 1, 1, 0), 384 },
+ { PLL1_CFG(16, 2, 1, 0), 768 },
+ { PLL1_CFG(20, 2, 1, 0), 960 },
+ { PLL1_CFG(21, 2, 1, 0), 1008 },
+ { PLL1_CFG(22, 2, 1, 0), 1056 },
+ { PLL1_CFG(23, 2, 1, 0), 1104 },
+ { PLL1_CFG(24, 2, 1, 0), 1152 },
+ { PLL1_CFG(25, 2, 1, 0), 1200 },
+ { PLL1_CFG(26, 2, 1, 0), 1248 },
+ { PLL1_CFG(27, 2, 1, 0), 1296 },
+ { PLL1_CFG(28, 2, 1, 0), 1344 },
+ { PLL1_CFG(29, 2, 1, 0), 1392 },
+ { PLL1_CFG(30, 2, 1, 0), 1440 },
+ { PLL1_CFG(31, 2, 1, 0), 1488 },
+ { PLL1_CFG(20, 4, 1, 0), 1944 },
+};
+
+static inline u32 div_ceil(u32 a, u32 b)
+{
+ return (a + b - 1) / b;
+}
+
+static void cpu_clk_src_switch(u32 clksel_bits)
+{
+ u32 reg32;
+
+ reg32 = read32(&ccm->cpu_ahb_apb0_cfg);
+ reg32 &= ~CPU_CLK_SRC_MASK;
+ reg32 |= clksel_bits & CPU_CLK_SRC_MASK;
+ write32(reg32, &ccm->cpu_ahb_apb0_cfg);
+}
+
+static void change_sys_divisors(u8 axi, u8 ahb_exp, u8 apb0_exp)
+{
+ u32 reg32;
+
+ reg32 = read32(&ccm->cpu_ahb_apb0_cfg);
+ /* Not a typo: We want to keep only the CLK_SRC bits */
+ reg32 &= CPU_CLK_SRC_MASK;
+ reg32 |= ((axi - 1) << 0) & AXI_DIV_MASK;
+ reg32 |= (ahb_exp << 4) & AHB_DIV_MASK;
+ reg32 |= (apb0_exp << 8) & APB0_DIV_MASK;
+ write32(reg32, &ccm->cpu_ahb_apb0_cfg);
+}
+
+static void spin_delay(u32 loops)
+{
+ volatile u32 x = loops;
+ while (x--);
+}
+
+/**
+ * \brief Configure the CPU clock and PLL1
+ *
+ * To run at full speed, the CPU uses PLL1 as the clock source. AXI, AHB, and
+ * APB0 are derived from the CPU clock, and need to be kept within certain
+ * limits. This function configures PLL1 as close as possible to the desired
+ * frequency, based on a set of known working configurations for PLL1. It then
+ * calculates and applies the appropriate divisors for the AXI/AHB/APB0 clocks,
+ * before finally switching the CPU to run from the new clock.
+ * No further configuration of the CPU clock or divisors is needed. after
+ * calling this function.
+ *
+ * @param[in] cpu_clk_mhz Desired CPU clock, in MHz
+ */
+void a1x_set_cpu_clock(u16 cpu_clk_mhz)
+{
+ int i = 0;
+ u8 axi, ahb, ahb_exp, apb0, apb0_exp;
+ u32 actual_mhz;
+
+ /*
+ * Rated clock for PLL1 is 2000 MHz, but there is no combination of
+ * parameters that yields that exact frequency. 1944 MHz is the highest.
+ */
+ if (cpu_clk_mhz > 1944) {
+ printk(BIOS_CRIT, "BUG! maximum PLL1 clock is 1944 MHz,"
+ "but asked to clock CPU at %d MHz\n",
+ cpu_clk_mhz);
+ cpu_clk_mhz = 1944;
+ }
+ /* Find target frequency */
+ while (pll1_table[i].freq_mhz < cpu_clk_mhz)
+ i++;
+
+ actual_mhz = pll1_table[i].freq_mhz;
+
+ if (cpu_clk_mhz != actual_mhz) {
+ printk(BIOS_WARNING, "Parameters for %d MHz not available, "
+ "setting CPU clock at %d MHz\n",
+ cpu_clk_mhz, actual_mhz);
+ }
+
+ /*
+ * Calculate system clock divisors:
+ * The minimum clock divisor for APB0 is 2, which guarantees that AHB0
+ * will always be in spec, as long as AHB is in spec, although the max
+ * AHB0 clock we can get is 125 MHz
+ */
+ axi = div_ceil(actual_mhz, 450); /* Max 450 MHz */
+ ahb = div_ceil(actual_mhz/axi, 250); /* Max 250 MHz */
+ apb0 = 2; /* Max 150 MHz */
+
+ ahb_exp = log2_ceil(ahb);
+ ahb = 1 << ahb_exp;
+ apb0_exp = 1;
+
+ printk(BIOS_INFO, "CPU: %d MHz, AXI %d Mhz, AHB: %d MHz APB0: %d MHz\n",
+ actual_mhz,
+ actual_mhz / axi,
+ actual_mhz / (axi * ahb),
+ actual_mhz / (axi * ahb * apb0));
+
+ /* Keep the CPU off PLL1 while we change PLL parameters */
+ cpu_clk_src_switch(CPU_CLK_SRC_OSC24M);
+ /*
+ * We can't use udelay() here. udelay() relies on timer 0, but timers
+ * have the habit of not ticking when the CPU is clocked from the main
+ * oscillator.
+ */
+ spin_delay(8);
+
+ change_sys_divisors(axi, ahb_exp, apb0_exp);
+
+ /* Configure PLL1 at the desired frequency */
+ write32(pll1_table[i].pll1_cfg, &ccm->pll1_cfg);
+ spin_delay(8);
+
+ cpu_clk_src_switch(CPU_CLK_SRC_PLL1);
+ /* Here, we're running from PLL, so timers will tick */
+ udelay(1);
+}
+
+#endif /* __BOOT_BLOCK__ */
diff --git a/src/cpu/allwinner/a10/clock.h b/src/cpu/allwinner/a10/clock.h
index 41400abb7e..0be736cf34 100644
--- a/src/cpu/allwinner/a10/clock.h
+++ b/src/cpu/allwinner/a10/clock.h
@@ -256,4 +256,7 @@ void a1x_pll5_enable_dram_clock_output(void);
void a1x_ungate_dram_clock_output(void);
void a1x_gate_dram_clock_output(void);
+/* Not available in bootblock */
+void a1x_set_cpu_clock(u16 cpu_clk_mhz);
+
#endif /* CPU_ALLWINNER_A10_CLOCK_H */