CMOS: Add set_option and rework get_option.

To ease some of my debugging pain on the unichrome, i decided i needed to
move FB size selection into cmos, so i could test a size and then reset it
to the default after loading this value so that the next reboot uses the
(working) default again. This meant implementing set_option in parallel to
get_option.

get_option was then found to have inversed argument ordering (like outb) and
passing char * and then depending on the cmos layout length, which made me
feel quite uncomfortable. Since we either have reserved space (which we
shouldn't do anything with in these two functions), an enum or a
hexadecimal value, unsigned int seemed like the way to go. So all users of
get_option now have their arguments inversed and switched from using ints
to unsigned ints now.

The way get_cmos_value was implemented forced us to not overlap byte and to
have multibyte values be byte aligned. This logic is now adapted to do a
full uint32_t read (when needed) at any offset and any length up to 32, and
the shifting all happens inside an uint32_t as well. set_cmos_value was
implemented similarly. Both routines have been extensively tested in a
quick separate little program as it is not easy to get this stuff right.

build_opt_tbl.c was altered to function correctly within these new
parameters. The enum value retrieval has been changed strol(..., NULL, 10)
to stroul(..., NULL, 0), so that we not only are able to use unsigned ints
now but so that we also interprete hex values correctly. The 32bit limit
gets imposed on all entries not marked reserved, an unused "user_data" field
that appeared in a lot of cmos.layouts has been changed to reserved as well.

Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Peter Stuge <peter@stuge.se>

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4332 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

4 files changed, 8 insertions, 8 deletions

diff --git a/src/cpu/amd/dualcore/amd_sibling.c b/src/cpu/amd/dualcore/amd_sibling.c
index 899b859d4f..45d12d8288 100644
--- a/src/cpu/amd/dualcore/amd_sibling.c
+++ b/src/cpu/amd/dualcore/amd_sibling.c
@@ -14,7 +14,7 @@
 #include <cpu/amd/amdk8_sysconf.h>
 
 static int first_time = 1;
-static int disable_siblings = !CONFIG_LOGICAL_CPUS;
+static uint32_t disable_siblings = !CONFIG_LOGICAL_CPUS;
 
 #include "dualcore_id.c"
 
@@ -62,7 +62,7 @@ unsigned get_apicid_base(unsigned ioapic_num)
 	unsigned nb_cfg_54;
         int bsp_apic_id = lapicid(); // bsp apicid
 
-        get_option(&disable_siblings, "dual_core");
+        get_option("dual_core", &disable_siblings);
 
         //get the nodes number
         dev = dev_find_slot(0, PCI_DEVFN(0x18,0));
@@ -127,7 +127,7 @@ void amd_sibling_init(device_t cpu)
 	/* On the bootstrap processor see if I want sibling cpus enabled */
 	if (first_time) {
 		first_time = 0;
-		get_option(&disable_siblings, "dual_core");
+		get_option("dual_core", &disable_siblings);
 	}
 	result = cpuid(0x80000008);
 	/* See how many sibling cpus we have */
diff --git a/src/cpu/amd/model_fxx/model_fxx_init.c b/src/cpu/amd/model_fxx/model_fxx_init.c
index 3bccfe0d83..2bae476bc1 100644
--- a/src/cpu/amd/model_fxx/model_fxx_init.c
+++ b/src/cpu/amd/model_fxx/model_fxx_init.c
@@ -248,7 +248,7 @@ static void init_ecc_memory(unsigned node_id)
 	struct mtrr_state mtrr_state;
 
 	device_t f1_dev, f2_dev, f3_dev;
-	int enable_scrubbing;
+	uint32_t enable_scrubbing;
 	uint32_t dcl;
 
 	f1_dev = dev_find_slot(0, PCI_DEVFN(0x18 + node_id, 1));
@@ -266,7 +266,7 @@ static void init_ecc_memory(unsigned node_id)
 
 	/* See if we scrubbing should be enabled */
 	enable_scrubbing = 1;
-	get_option(&enable_scrubbing, "hw_scrubber");
+	get_option("hw_scrubber", &enable_scrubbing);
 
 	/* Enable cache scrubbing at the lowest possible rate */
 	if (enable_scrubbing) {
diff --git a/src/cpu/amd/quadcore/amd_sibling.c b/src/cpu/amd/quadcore/amd_sibling.c
index 4d4e11648f..a35520bee1 100644
--- a/src/cpu/amd/quadcore/amd_sibling.c
+++ b/src/cpu/amd/quadcore/amd_sibling.c
@@ -82,7 +82,7 @@ u32 get_apicid_base(u32 ioapic_num)
 
 	u32 disable_siblings = !CONFIG_LOGICAL_CPUS;
 
-	get_option(&disable_siblings, "quad_core");
+	get_option("quad_core", &disable_siblings);
 
 	siblings = get_max_siblings(sysconf.nodes);
 
diff --git a/src/cpu/intel/hyperthreading/intel_sibling.c b/src/cpu/intel/hyperthreading/intel_sibling.c
index 52700fb4d2..c0d569a923 100644
--- a/src/cpu/intel/hyperthreading/intel_sibling.c
+++ b/src/cpu/intel/hyperthreading/intel_sibling.c
@@ -7,7 +7,7 @@
 #include <smp/spinlock.h>
 
 static int first_time = 1;
-static int disable_siblings = !CONFIG_LOGICAL_CPUS;
+static uint32_t disable_siblings = !CONFIG_LOGICAL_CPUS;
 
 void intel_sibling_init(device_t cpu)
 {
@@ -17,7 +17,7 @@ void intel_sibling_init(device_t cpu)
 	/* On the bootstrap processor see if I want sibling cpus enabled */
 	if (first_time) {
 		first_time = 0;
-		get_option(&disable_siblings, "hyper_threading");
+		get_option("hyper_threading", &disable_siblings);
 	}
 	result = cpuid(1);
 	/* Is hyperthreading supported */