pciexp: Add support for allocating PCI express hotplug resources

This change adds support for allocating resources for PCI express hotplug
bridges when PCIEXP_HOTPLUG is selected. By default, this will add 32 PCI
subordinate numbers (buses), 256 MiB of prefetchable memory, 8 MiB of
non-prefetchable memory, and 8 KiB of I/O space to any device with the
PCI_EXP_SLTCAP_HPC bit set in the PCI_EXP_SLTCAP register, which
indicates hot-plugging capability. The resource allocation is configurable,
please see the PCIEXP_HOTPLUG_* variables in src/device/Kconfig.

In order to support the allocation of hotplugged PCI buses, a new field
is added to struct device called hotplug_buses. This is defaulted to
zero, but when set, it adds the hotplug_buses value to the subordinate
value of the PCI bridge. This allows devices to be plugged in and
unplugged after boot.

This code was tested on the System76 Darter Pro (darp6). Before this
change, there are not enough resources allocated to the Thunderbolt
PCI bridge to allow plugging in new devices after boot. This can be
worked around in the Linux kernel by passing a boot param such as:
pci=assign-busses,hpbussize=32,realloc

This change makes it possible to use Thunderbolt hotplugging without
kernel parameters, and attempts to match closely what our motherboard
manufacturer's firmware does by default.

Signed-off-by: Jeremy Soller <jeremy@system76.com>
Change-Id: I500191626584b83e6a8ae38417fd324b5e803afc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35946
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

1 files changed, 44 insertions, 0 deletions

diff --git a/src/device/Kconfig b/src/device/Kconfig
index 0bd9fe1d8b..a25bb911c9 100644
--- a/src/device/Kconfig
+++ b/src/device/Kconfig
@@ -555,6 +555,50 @@ config PCIEXP_L1_SUB_STATE
 	help
 	  Detect and enable ASPM on PCIe links.
 
+config PCIEXP_HOTPLUG
+	prompt "Enable PCIe Hotplug Support"
+	bool
+	default n
+	help
+	  Allocate resources for PCIe hotplug bridges
+
+if PCIEXP_HOTPLUG
+
+config PCIEXP_HOTPLUG_BUSES
+	int "PCI Express Hotplug Buses"
+	default 32
+	help
+	  This is the number of buses allocated for hotplug PCI express
+	  bridges, for use by hotplugged child devices. The default is 32
+	  buses.
+
+config PCIEXP_HOTPLUG_MEM
+	hex "PCI Express Hotplug Memory"
+	default 0x800000
+	help
+	  This is the amount of memory space, in bytes, to allocate to
+	  hotplug PCI express bridges, for use by hotplugged child devices.
+	  This size should be page-aligned. The default is 8 MiB.
+
+config PCIEXP_HOTPLUG_PREFETCH_MEM
+	hex "PCI Express Hotplug Prefetch Memory"
+	default 0x10000000
+	help
+	  This is the amount of pre-fetchable memory space, in bytes, to
+	  allocate to hot-plug PCI express bridges, for use by hotplugged
+	  child devices. This size should be page-aligned. The default is
+	  256 MiB.
+
+config PCIEXP_HOTPLUG_IO
+	hex "PCI Express Hotplug I/O Space"
+	default 0x2000
+	help
+	  This is the amount of I/O space to allocate to hot-plug PCI
+	  express bridges, for use by hotplugged child devices. The default
+	  is 8 KiB.
+
+endif # PCIEXP_HOTPLUG
+
 endif # PCIEXP_PLUGIN_SUPPORT
 
 config EARLY_PCI_BRIDGE