OxPCIe uart: Split PCI bridge control

None of the PCI bridge management here is specific to the PCI UART
device/function. Also the Kconfig variable defaults are not globally
valid, fill samsung/lumpy with working values.

Change-Id: Id22631412379af1d6bf62c996357d36d7ec47ca3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5237
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>

1 files changed, 104 insertions, 0 deletions

diff --git a/src/device/pci_early.c b/src/device/pci_early.c
index c15a4d0f77..e31287e8bf 100644
--- a/src/device/pci_early.c
+++ b/src/device/pci_early.c
@@ -1,6 +1,8 @@
 /*
  * This file is part of the coreboot project.
  *
+ * Copyright (C) 2011 Google Inc
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; version 2 of the License.
@@ -15,9 +17,14 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA, 02110-1301 USA
  */
 
+#define __SIMPLE_DEVICE__
+
 #include <arch/io.h>
 #include <device/pci.h>
 #include <device/pci_def.h>
+#include <delay.h>
+
+#ifdef __PRE_RAM__
 
 unsigned pci_find_next_capability(device_t dev, unsigned cap, unsigned last)
 {
@@ -66,3 +73,100 @@ unsigned pci_find_capability(device_t dev, unsigned cap)
 {
 	return pci_find_next_capability(dev, cap, 0);
 }
+#endif
+
+
+#if CONFIG_EARLY_PCI_BRIDGE
+
+static void pci_bridge_reset_secondary(device_t p2p_bridge)
+{
+	u16 reg16;
+
+	/* First we reset the secondary bus. */
+	reg16 = pci_read_config16(p2p_bridge, PCI_BRIDGE_CONTROL);
+	reg16 |= (1 << 6); /* SRESET */
+	pci_write_config16(p2p_bridge, PCI_BRIDGE_CONTROL, reg16);
+
+	/* Assume we don't have to wait here forever */
+
+	/* Read back and clear reset bit. */
+	reg16 = pci_read_config16(p2p_bridge, PCI_BRIDGE_CONTROL);
+	reg16 &= ~(1 << 6); /* SRESET */
+	pci_write_config16(p2p_bridge, PCI_BRIDGE_CONTROL, reg16);
+}
+
+static void pci_bridge_set_secondary(device_t p2p_bridge, u8 secondary)
+{
+	/* Disable config transaction forwarding. */
+	pci_write_config8(p2p_bridge, PCI_SECONDARY_BUS, 0x00);
+	pci_write_config8(p2p_bridge, PCI_SUBORDINATE_BUS, 0x00);
+	/* Enable config transaction forwarding. */
+	pci_write_config8(p2p_bridge, PCI_SECONDARY_BUS, secondary);
+	pci_write_config8(p2p_bridge, PCI_SUBORDINATE_BUS, secondary);
+}
+
+static void pci_bridge_set_mmio(device_t p2p_bridge, u32 base, u32 size)
+{
+	u16 reg16;
+
+	/* Disable MMIO window behind the bridge. */
+	reg16 = pci_read_config16(p2p_bridge, PCI_COMMAND);
+	reg16 &= ~PCI_COMMAND_MEMORY;
+	pci_write_config16(p2p_bridge, PCI_COMMAND, reg16);
+	pci_write_config32(p2p_bridge, PCI_MEMORY_BASE, 0x10);
+
+	if (!size)
+		return;
+
+	/* Enable MMIO window behind the bridge. */
+	pci_write_config32(p2p_bridge, PCI_MEMORY_BASE,
+		((base + size - 1) & 0xfff00000) | ((base >> 16) & 0xfff0));
+
+	reg16 = pci_read_config16(p2p_bridge, PCI_COMMAND);
+	reg16 |= PCI_COMMAND_MEMORY;
+	pci_write_config16(p2p_bridge, PCI_COMMAND, reg16);
+}
+
+void pci_early_bridge_init(void)
+{
+	int timeout, ret = -1;
+
+	/* No PCI-to-PCI bridges are enabled yet, so the one we try to
+	 * configure must have its primary on bus 0.
+	 */
+	pci_devfn_t p2p_bridge = PCI_DEV(0, CONFIG_EARLY_PCI_BRIDGE_DEVICE,
+		CONFIG_EARLY_PCI_BRIDGE_FUNCTION);
+
+	/* Secondary bus number is mostly irrelevant as we disable
+	 * configuration transactions right after the probe.
+	 */
+	u8 secondary = 15;
+	u8 dev = 0;
+	u32 mmio_base = CONFIG_EARLY_PCI_MMIO_BASE;
+
+	/* Enable configuration and MMIO over bridge. */
+	pci_bridge_reset_secondary(p2p_bridge);
+	pci_bridge_set_secondary(p2p_bridge, secondary);
+	pci_bridge_set_mmio(p2p_bridge, mmio_base, 0x4000);
+
+	for (timeout = 20000; timeout; timeout--) {
+		u32 id = pci_read_config32(PCI_DEV(secondary, dev, 0), PCI_VENDOR_ID);
+		if (id != 0 && id != 0xffffffff && id != 0xffff0001)
+			break;
+		udelay(10);
+	}
+
+	if (timeout != 0)
+		ret = pci_early_device_probe(secondary, dev, mmio_base);
+
+	/* Disable MMIO window if we found no suitable device. */
+	if (ret)
+		pci_bridge_set_mmio(p2p_bridge, 0, 0);
+
+	/* Resource allocator will reconfigure bridges and secondary bus
+	 * number may change. Thus early device cannot reliably use config
+	 * transactions from here on, so we may as well disable them.
+	 */
+	pci_bridge_set_secondary(p2p_bridge, 0);
+}
+#endif /* CONFIG_EARLY_PCI_BRIDGE */