diff options
author | Timothy Pearson <tpearson@raptorengineeringinc.com> | 2015-09-05 17:53:20 -0500 |
---|---|---|
committer | Peter Stuge <peter@stuge.se> | 2015-10-24 02:00:49 +0200 |
commit | cab71b638f6bd9d8c7e6d7955d4527c5236177cb (patch) | |
tree | 78103ed580d8b0481c363d8aa0f31fcdaf5742ca /src/drivers/i2c/w83795/w83795.c | |
parent | 5a0efd255da0dbba2e6ff4b8ad9ca9bad8370857 (diff) | |
download | coreboot-cab71b638f6bd9d8c7e6d7955d4527c5236177cb.tar.xz |
drivers/i2c/w83795: Add full support for core functions
Add full support for fan control, fan monitoring, and voltage
monitoring. Fan speeds and functions are configurable via
each mainboard's devicetree.cb file.
NOTE: This patch effectively rewrites large portions of
the original driver. You may need to re-verify correct
operation on your hardware if you were using the old
driver code.
Change-Id: I3e246af0e398d65ee43ea708060885c67fd7d202
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11936
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
Diffstat (limited to 'src/drivers/i2c/w83795/w83795.c')
-rw-r--r-- | src/drivers/i2c/w83795/w83795.c | 357 |
1 files changed, 238 insertions, 119 deletions
diff --git a/src/drivers/i2c/w83795/w83795.c b/src/drivers/i2c/w83795/w83795.c index 2bbe0bef17..4a6486b57c 100644 --- a/src/drivers/i2c/w83795/w83795.c +++ b/src/drivers/i2c/w83795/w83795.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2015 Raptor Engineering * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -21,106 +22,73 @@ #include <arch/cpu.h> #include <console/console.h> #include <device/device.h> -#include "southbridge/amd/cimx/sb700/smbus.h" /*SMBUS_IO_BASE*/ #include "w83795.h" +#include <device/smbus.h> +#include "chip.h" -static int w83795_set_bank(u8 bank) +static int w83795_set_bank(struct device *dev, uint8_t bank) { - return do_smbus_write_byte(SMBUS_IO_BASE, W83795_DEV, W83795_REG_BANKSEL, bank); + return smbus_write_byte(dev, W83795_REG_BANKSEL, bank); } -static u8 w83795_read(u16 reg) +static uint8_t w83795_read(struct device *dev, uint16_t reg) { int ret; - ret = w83795_set_bank(reg >> 8); + ret = w83795_set_bank(dev, reg >> 8); if (ret < 0) { - printk(BIOS_DEBUG, "read faild to set bank %x\n", reg >> 8); + printk(BIOS_DEBUG, "read failed to set bank %x\n", reg >> 8); return -1; } - ret = do_smbus_read_byte(SMBUS_IO_BASE, W83795_DEV, reg & 0xff); + ret = smbus_read_byte(dev, reg & 0xff); return ret; } -static u8 w83795_write(u16 reg, u8 value) +static uint8_t w83795_write(struct device *dev, uint16_t reg, uint8_t value) { int err; - err = w83795_set_bank(reg >> 8); + err = w83795_set_bank(dev, reg >> 8); if (err < 0) { - printk(BIOS_DEBUG, "write faild to set bank %x\n", reg >> 8); + printk(BIOS_DEBUG, "write failed to set bank %x\n", reg >> 8); return -1; } - err = do_smbus_write_byte(SMBUS_IO_BASE, W83795_DEV, reg & 0xff, value); + err = smbus_write_byte(dev, reg & 0xff, value); return err; } /* - * Enable Digital Temperature Sensor + * Configure Digital Temperature Sensor */ -static void w83795_dts_enable(u8 dts_src) +static void w83795_dts_configure(struct device *dev, uint8_t dts_src) { u8 val; /* DIS */ - val = w83795_read(W83795_REG_DTSC); - val |= (dts_src & 0x01); - w83795_write(W83795_REG_DTSC, val); - - /* DTSE */ - val = w83795_read(W83795_REG_DTSE); - val |= 0xFF; - w83795_write(W83795_REG_DTSE, val); - - /* store bank3 regs first before enable DTS */ - - /* - * TD/TR1-4 thermal diode by default - * 0x00 Disable - * 0x01 thermistors on motherboard - * 0x10 different mode voltage - * 0x11 CPU internal thermal diode output - * - * TR5-6 thermistors by default TRn - */ - val = 0x55; /* thermal diode */ - w83795_write(W83795_REG_TEMP_CTRL2, val); - - /* Enable Digital Temperature Sensor */ - val = w83795_read(W83795_REG_TEMP_CTRL1); - val |= W83795_REG_TEMP_CTRL1_EN_DTS; /* EN_DTS */ - w83795_write(W83795_REG_TEMP_CTRL1, val); -} - -static void w83795_set_tfmr(w83795_fan_mode_t mode) -{ - u8 val; - u8 i; + val = w83795_read(dev, W83795_REG_DTSC) & ~0x1; + val |= dts_src & 0x1; + w83795_write(dev, W83795_REG_DTSC, val); - if ((mode == SMART_FAN_MODE) || (mode == THERMAL_CRUISE_MODE)) { - val = 0xFF; - } else { - val = 0x00; - } - - for (i = 0; i < 6; i++) - w83795_write(W83795_REG_TFMR(i), val); + /* TODO + * Determine if DTS interface needs to be reset + * (W83795_REG_DTSC bit 7) before operation. + */ } -static u32 w83795_set_fan_mode(w83795_fan_mode_t mode) +static u32 w83795_set_fan_mode(struct device *dev, w83795_fan_mode_t mode) { if (mode == SPEED_CRUISE_MODE) { - w83795_write(W83795_REG_FCMS1, 0xFF); + w83795_write(dev, W83795_REG_FCMS1, 0xFF); printk(BIOS_INFO, "W83795G/ADG work in Speed Cruise Mode\n"); } else { - w83795_write(W83795_REG_FCMS1, 0x00); + w83795_write(dev, W83795_REG_FCMS1, 0x00); if (mode == THERMAL_CRUISE_MODE) { - w83795_write(W83795_REG_FCMS2, 0x00); + w83795_write(dev, W83795_REG_FCMS2, 0x00); printk(BIOS_INFO, "W83795G/ADG work in Thermal Cruise Mode\n"); } else if (mode == SMART_FAN_MODE) { - w83795_write(W83795_REG_FCMS2, 0x3F); + w83795_write(dev, W83795_REG_FCMS2, 0x3F); printk(BIOS_INFO, "W83795G/ADG work in Smart Fan Mode\n"); } else { printk(BIOS_INFO, "W83795G/ADG work in Manual Mode\n"); @@ -131,40 +99,12 @@ static u32 w83795_set_fan_mode(w83795_fan_mode_t mode) return 0; } -static void w83795_set_tss(void) +static void w83795_set_fan(struct device *dev, w83795_fan_mode_t mode) { - u8 val; - - val = 0x00; - w83795_write(W83795_REG_TSS(0), val); /* Temp1, 2 */ - w83795_write(W83795_REG_TSS(1), val); /* Temp3, 4 */ - w83795_write(W83795_REG_TSS(2), val); /* Temp5, 6 */ -} - -static void w83795_set_fan(w83795_fan_mode_t mode) -{ - u8 i; - - /* select temperature sensor (TSS)*/ - w83795_set_tss(); - - /* select Temperature to Fan mapping Relationships (TFMR)*/ - w83795_set_tfmr(mode); - /* set fan output controlled mode (FCMS)*/ - w83795_set_fan_mode(mode); + w83795_set_fan_mode(dev, mode); - /* Set Critical Temperature to Full Speed all fan (CTFS) */ - for (i = 0; i < 6; i++) { - w83795_write(W83795_REG_CTFS(i), 0x50); /* default 80 celsius degree */ - } - - if (mode == THERMAL_CRUISE_MODE) { - /* Set Target Temperature of Temperature Inputs (TTTI) */ - for (i = 0; i < 6; i++) { - w83795_write(W83795_REG_TTTI(i), 0x28); /* default 40 celsius degree */ - } - } else if (mode == SMART_FAN_MODE) { + if (mode == SMART_FAN_MODE) { /* Set the Relative Register-at SMART FAN IV Control Mode Table */ //SFIV TODO } @@ -173,16 +113,44 @@ static void w83795_set_fan(w83795_fan_mode_t mode) //TODO } -static void w83795_init(w83795_fan_mode_t mode, u8 dts_src) +static uint8_t fan_pct_to_cfg_val(uint8_t percent) { - u8 i; - u8 val; + uint16_t cfg = (((unsigned int)percent * 10000) / 3922); + if (cfg > 0xff) + cfg = 0xff; + return cfg; +} + +static uint8_t millivolts_to_limit_value_type1(int millivolts) +{ + /* Datasheet v1.41 pages 44 and 70 (VSEN1 - VSEN11, VTT) */ + return ((millivolts / 2) >> 2); +} + +static uint8_t millivolts_to_limit_value_type2(int millivolts) +{ + /* Datasheet v1.41 page pages 44 and 70 (3VSB, 3VDD, VBAT) */ + return ((millivolts / 6) >> 2); +} + +static uint16_t millivolts_to_limit_value_type3(int millivolts) +{ + /* Datasheet v1.41 page 45 (VSEN12, VSEN13, VDSEN14 - VDSEN17) */ + return (millivolts / 2); +} + +static void w83795_init(struct device *dev, w83795_fan_mode_t mode, u8 dts_src) +{ + struct drivers_i2c_w83795_config *config = dev->chip_info; + uint8_t i; + uint8_t val; + uint16_t limit_value; - if (do_smbus_read_byte(SMBUS_IO_BASE, W83795_DEV, 0x00) < 0) { + if (smbus_read_byte(dev, 0x00) < 0) { printk(BIOS_ERR, "W83795G/ADG Nuvoton H/W Monitor not found\n"); return; } - val = w83795_read(W83795_REG_CONFIG); + val = w83795_read(dev, W83795_REG_CONFIG); if ((val & W83795_REG_CONFIG_CONFIG48) == 0) printk(BIOS_INFO, "Found 64 pin W83795G Nuvoton H/W Monitor\n"); else if ((val & W83795_REG_CONFIG_CONFIG48) == 1) @@ -190,35 +158,186 @@ static void w83795_init(w83795_fan_mode_t mode, u8 dts_src) /* Reset */ val |= W83795_REG_CONFIG_INIT; - w83795_write(W83795_REG_CONFIG, val); - - /* Fan monitoring setting */ - val = 0xFF; /* FAN1-FAN8 */ - w83795_write(W83795_REG_FANIN_CTRL1, val); - val = 0x3F; /* FAN9-FAN14 */ - w83795_write(W83795_REG_FANIN_CTRL2, val); + w83795_write(dev, W83795_REG_CONFIG, val); + + /* Fan monitor settings */ + w83795_write(dev, W83795_REG_FANIN_CTRL1, config->fanin_ctl1); + w83795_write(dev, W83795_REG_FANIN_CTRL2, config->fanin_ctl2); + + /* Temperature thresholds */ + w83795_write(dev, W83795_REG_TEMP_CRIT(0), config->tr1_critical_temperature); + w83795_write(dev, W83795_REG_TEMP_CRIT_HYSTER(0), config->tr1_critical_hysteresis); + w83795_write(dev, W83795_REG_TEMP_WARN(0), config->tr1_warning_temperature); + w83795_write(dev, W83795_REG_TEMP_WARN_HYSTER(0), config->tr1_warning_hysteresis); + w83795_write(dev, W83795_REG_TEMP_CRIT(1), config->tr2_critical_temperature); + w83795_write(dev, W83795_REG_TEMP_CRIT_HYSTER(1), config->tr2_critical_hysteresis); + w83795_write(dev, W83795_REG_TEMP_WARN(1), config->tr2_warning_temperature); + w83795_write(dev, W83795_REG_TEMP_WARN_HYSTER(1), config->tr2_warning_hysteresis); + w83795_write(dev, W83795_REG_TEMP_CRIT(2), config->tr3_critical_temperature); + w83795_write(dev, W83795_REG_TEMP_CRIT_HYSTER(2), config->tr3_critical_hysteresis); + w83795_write(dev, W83795_REG_TEMP_WARN(2), config->tr3_warning_temperature); + w83795_write(dev, W83795_REG_TEMP_WARN_HYSTER(2), config->tr3_warning_hysteresis); + w83795_write(dev, W83795_REG_TEMP_CRIT(3), config->tr4_critical_temperature); + w83795_write(dev, W83795_REG_TEMP_CRIT_HYSTER(3), config->tr4_critical_hysteresis); + w83795_write(dev, W83795_REG_TEMP_WARN(3), config->tr4_warning_temperature); + w83795_write(dev, W83795_REG_TEMP_WARN_HYSTER(3), config->tr4_warning_hysteresis); + w83795_write(dev, W83795_REG_TEMP_CRIT(4), config->tr5_critical_temperature); + w83795_write(dev, W83795_REG_TEMP_CRIT_HYSTER(4), config->tr5_critical_hysteresis); + w83795_write(dev, W83795_REG_TEMP_WARN(4), config->tr5_warning_temperature); + w83795_write(dev, W83795_REG_TEMP_WARN_HYSTER(4), config->tr5_warning_hysteresis); + w83795_write(dev, W83795_REG_TEMP_CRIT(5), config->tr6_critical_temperature); + w83795_write(dev, W83795_REG_TEMP_CRIT_HYSTER(5), config->tr6_critical_hysteresis); + w83795_write(dev, W83795_REG_TEMP_WARN(5), config->tr6_warning_temperature); + w83795_write(dev, W83795_REG_TEMP_WARN_HYSTER(5), config->tr6_warning_hysteresis); + + /* DTS temperature thresholds */ + w83795_write(dev, W83795_REG_DTS_CRIT, config->dts_critical_temperature); + w83795_write(dev, W83795_REG_DTS_CRIT_HYSTER, config->dts_critical_hysteresis); + w83795_write(dev, W83795_REG_DTS_WARN, config->dts_warning_temperature); + w83795_write(dev, W83795_REG_DTS_WARN_HYSTER, config->dts_warning_hysteresis); + + /* Configure DTS registers in bank3 before enabling DTS */ + w83795_dts_configure(dev, dts_src); + + /* DTS enable */ + w83795_write(dev, W83795_REG_DTSE, config->temp_dtse); + + /* Temperature monitor settings */ + w83795_write(dev, W83795_REG_TEMP_CTRL1, config->temp_ctl1); + w83795_write(dev, W83795_REG_TEMP_CTRL2, config->temp_ctl2); + + /* Temperature to fan mappings */ + w83795_write(dev, W83795_REG_TFMR(0), config->temp1_fan_select); + w83795_write(dev, W83795_REG_TFMR(1), config->temp2_fan_select); + w83795_write(dev, W83795_REG_TFMR(2), config->temp3_fan_select); + w83795_write(dev, W83795_REG_TFMR(3), config->temp4_fan_select); + w83795_write(dev, W83795_REG_TFMR(4), config->temp5_fan_select); + w83795_write(dev, W83795_REG_TFMR(5), config->temp6_fan_select); + + /* Temperature data source to temperature mappings */ + w83795_write(dev, W83795_REG_T12TSS, ((config->temp2_source_select & 0x0f) << 4) | (config->temp1_source_select & 0x0f)); + w83795_write(dev, W83795_REG_T34TSS, ((config->temp4_source_select & 0x0f) << 4) | (config->temp3_source_select & 0x0f)); + w83795_write(dev, W83795_REG_T56TSS, ((config->temp6_source_select & 0x0f) << 4) | (config->temp5_source_select & 0x0f)); + + /* Set critical temperatures + * If any sensor exceeds the associated critical temperature, + * all fans will be forced to full speed. + */ + w83795_write(dev, W83795_REG_CTFS(0), config->temp1_critical_temperature); + w83795_write(dev, W83795_REG_CTFS(1), config->temp2_critical_temperature); + w83795_write(dev, W83795_REG_CTFS(2), config->temp3_critical_temperature); + w83795_write(dev, W83795_REG_CTFS(3), config->temp4_critical_temperature); + w83795_write(dev, W83795_REG_CTFS(4), config->temp5_critical_temperature); + w83795_write(dev, W83795_REG_CTFS(5), config->temp6_critical_temperature); + + /* Set fan control target temperatures */ + w83795_write(dev, W83795_REG_TTTI(0), config->temp1_target_temperature); + w83795_write(dev, W83795_REG_TTTI(1), config->temp2_target_temperature); + w83795_write(dev, W83795_REG_TTTI(2), config->temp3_target_temperature); + w83795_write(dev, W83795_REG_TTTI(3), config->temp4_target_temperature); + w83795_write(dev, W83795_REG_TTTI(4), config->temp5_target_temperature); + w83795_write(dev, W83795_REG_TTTI(5), config->temp6_target_temperature); + + /* Set fan stall prevention parameters */ + w83795_write(dev, W83795_REG_FAN_NONSTOP(0), config->fan1_nonstop); + w83795_write(dev, W83795_REG_FAN_NONSTOP(1), config->fan2_nonstop); + w83795_write(dev, W83795_REG_FAN_NONSTOP(2), config->fan3_nonstop); + w83795_write(dev, W83795_REG_FAN_NONSTOP(3), config->fan4_nonstop); + w83795_write(dev, W83795_REG_FAN_NONSTOP(4), config->fan5_nonstop); + w83795_write(dev, W83795_REG_FAN_NONSTOP(5), config->fan6_nonstop); + w83795_write(dev, W83795_REG_FAN_NONSTOP(6), config->fan7_nonstop); + w83795_write(dev, W83795_REG_FAN_NONSTOP(7), config->fan8_nonstop); + + /* Set fan default speed */ + w83795_write(dev, W83795_REG_DFSP, fan_pct_to_cfg_val(config->default_speed)); + + /* Set initial fan speeds */ + w83795_write(dev, W83795_REG_FAN_MANUAL_SPEED(0), fan_pct_to_cfg_val(config->fan1_duty)); + w83795_write(dev, W83795_REG_FAN_MANUAL_SPEED(1), fan_pct_to_cfg_val(config->fan2_duty)); + w83795_write(dev, W83795_REG_FAN_MANUAL_SPEED(2), fan_pct_to_cfg_val(config->fan3_duty)); + w83795_write(dev, W83795_REG_FAN_MANUAL_SPEED(3), fan_pct_to_cfg_val(config->fan4_duty)); + w83795_write(dev, W83795_REG_FAN_MANUAL_SPEED(4), fan_pct_to_cfg_val(config->fan5_duty)); + w83795_write(dev, W83795_REG_FAN_MANUAL_SPEED(5), fan_pct_to_cfg_val(config->fan6_duty)); + w83795_write(dev, W83795_REG_FAN_MANUAL_SPEED(6), fan_pct_to_cfg_val(config->fan7_duty)); + w83795_write(dev, W83795_REG_FAN_MANUAL_SPEED(7), fan_pct_to_cfg_val(config->fan8_duty)); + + /* Voltage monitor settings */ + w83795_write(dev, W83795_REG_VOLT_CTRL1, config->volt_ctl1); + w83795_write(dev, W83795_REG_VOLT_CTRL2, config->volt_ctl2); + + /* Voltage high/low limits */ + w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(0), millivolts_to_limit_value_type1(config->vcore1_high_limit_mv)); + w83795_write(dev, W83795_REG_VOLT_LIM_LOW(0), millivolts_to_limit_value_type1(config->vcore1_low_limit_mv)); + w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(1), millivolts_to_limit_value_type1(config->vcore2_high_limit_mv)); + w83795_write(dev, W83795_REG_VOLT_LIM_LOW(1), millivolts_to_limit_value_type1(config->vcore2_low_limit_mv)); + w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(2), millivolts_to_limit_value_type1(config->vsen3_high_limit_mv)); + w83795_write(dev, W83795_REG_VOLT_LIM_LOW(2), millivolts_to_limit_value_type1(config->vsen3_low_limit_mv)); + w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(3), millivolts_to_limit_value_type1(config->vsen4_high_limit_mv)); + w83795_write(dev, W83795_REG_VOLT_LIM_LOW(3), millivolts_to_limit_value_type1(config->vsen4_low_limit_mv)); + w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(4), millivolts_to_limit_value_type1(config->vsen5_high_limit_mv)); + w83795_write(dev, W83795_REG_VOLT_LIM_LOW(4), millivolts_to_limit_value_type1(config->vsen5_low_limit_mv)); + w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(5), millivolts_to_limit_value_type1(config->vsen6_high_limit_mv)); + w83795_write(dev, W83795_REG_VOLT_LIM_LOW(5), millivolts_to_limit_value_type1(config->vsen6_low_limit_mv)); + w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(6), millivolts_to_limit_value_type1(config->vsen7_high_limit_mv)); + w83795_write(dev, W83795_REG_VOLT_LIM_LOW(6), millivolts_to_limit_value_type1(config->vsen7_low_limit_mv)); + w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(7), millivolts_to_limit_value_type1(config->vsen8_high_limit_mv)); + w83795_write(dev, W83795_REG_VOLT_LIM_LOW(7), millivolts_to_limit_value_type1(config->vsen8_low_limit_mv)); + w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(8), millivolts_to_limit_value_type1(config->vsen9_high_limit_mv)); + w83795_write(dev, W83795_REG_VOLT_LIM_LOW(8), millivolts_to_limit_value_type1(config->vsen9_low_limit_mv)); + w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(9), millivolts_to_limit_value_type1(config->vsen10_high_limit_mv)); + w83795_write(dev, W83795_REG_VOLT_LIM_LOW(9), millivolts_to_limit_value_type1(config->vsen10_low_limit_mv)); + w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(10), millivolts_to_limit_value_type1(config->vsen11_high_limit_mv)); + w83795_write(dev, W83795_REG_VOLT_LIM_LOW(10), millivolts_to_limit_value_type1(config->vsen11_low_limit_mv)); + w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(11), millivolts_to_limit_value_type1(config->vtt_high_limit_mv)); + w83795_write(dev, W83795_REG_VOLT_LIM_LOW(11), millivolts_to_limit_value_type1(config->vtt_low_limit_mv)); + w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(12), millivolts_to_limit_value_type2(config->vdd_high_limit_mv)); + w83795_write(dev, W83795_REG_VOLT_LIM_LOW(12), millivolts_to_limit_value_type2(config->vdd_low_limit_mv)); + w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(13), millivolts_to_limit_value_type2(config->vsb_high_limit_mv)); + w83795_write(dev, W83795_REG_VOLT_LIM_LOW(13), millivolts_to_limit_value_type2(config->vsb_low_limit_mv)); + w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(14), millivolts_to_limit_value_type2(config->vbat_high_limit_mv)); + w83795_write(dev, W83795_REG_VOLT_LIM_LOW(14), millivolts_to_limit_value_type2(config->vbat_low_limit_mv)); + + /* VSEN12 limits */ + if (config->temp_ctl1 & 0x2) { + limit_value = millivolts_to_limit_value_type3(config->vsen12_high_limit_mv); + w83795_write(dev, W83795_REG_VOLT_LIM_HIGH_2_M(4), limit_value >> 2); + w83795_write(dev, W83795_REG_VOLT_LIM_HIGH_2_L(4), limit_value & 0x3); + limit_value = millivolts_to_limit_value_type3(config->vsen12_low_limit_mv); + w83795_write(dev, W83795_REG_VOLT_LIM_LOW_2_M(4), limit_value >> 2); + w83795_write(dev, W83795_REG_VOLT_LIM_LOW_2_L(4), limit_value & 0x3); + } - /* enable monitoring operations */ - val = w83795_read(W83795_REG_CONFIG); - val |= W83795_REG_CONFIG_START; - w83795_write(W83795_REG_CONFIG, val); + /* VSEN13 limits */ + if (config->temp_ctl1 & 0x8) { + limit_value = millivolts_to_limit_value_type3(config->vsen13_high_limit_mv); + w83795_write(dev, W83795_REG_VOLT_LIM_HIGH_2_M(5), limit_value >> 2); + w83795_write(dev, W83795_REG_VOLT_LIM_HIGH_2_L(5), limit_value & 0x3); + limit_value = millivolts_to_limit_value_type3(config->vsen13_low_limit_mv); + w83795_write(dev, W83795_REG_VOLT_LIM_LOW_2_M(5), limit_value >> 2); + w83795_write(dev, W83795_REG_VOLT_LIM_LOW_2_L(5), limit_value & 0x3); + } - w83795_dts_enable(dts_src); - w83795_set_fan(mode); + w83795_set_fan(dev, mode); - printk(BIOS_INFO, "Fan CTFS(celsius) TTTI(celsius)\n"); + /* Show current fan control settings */ + printk(BIOS_INFO, "Fan\tCTFS(celsius)\tTTTI(celsius)\n"); for (i = 0; i < 6; i++) { - val = w83795_read(W83795_REG_CTFS(i)); - printk(BIOS_INFO, " %x %d", i, val); - val = w83795_read(W83795_REG_TTTI(i)); - printk(BIOS_INFO, " %d\n", val); + val = w83795_read(dev, W83795_REG_CTFS(i)); + printk(BIOS_INFO, " %x\t%d", i + 1, val); + val = w83795_read(dev, W83795_REG_TTTI(i)); + printk(BIOS_INFO, "\t%d\n", val); } - /* Temperature ReadOut */ - for (i = 0; i < 9; i++) { - val = w83795_read(W83795_REG_DTS(i)); - printk(BIOS_DEBUG, "DTS%x ReadOut=%x\n", i, val); + /* Show current temperatures */ + for (i = 0; i < 8; i++) { + val = w83795_read(dev, W83795_REG_DTS(i)); + printk(BIOS_DEBUG, "DTS%x current value: %x\n", i + 1, val); } + + /* Start monitoring / fan control */ + val = w83795_read(dev, W83795_REG_CONFIG); + val |= W83795_REG_CONFIG_START; + w83795_write(dev, W83795_REG_CONFIG, val); } static void w83795_hwm_init(struct device *dev) @@ -232,9 +351,9 @@ static void w83795_hwm_init(struct device *dev) die("CPU: missing cpu device structure"); if (cpu->vendor == X86_VENDOR_AMD) - w83795_init(THERMAL_CRUISE_MODE, DTS_SRC_AMD_SBTSI); + w83795_init(dev, THERMAL_CRUISE_MODE, DTS_SRC_AMD_SBTSI); else if (cpu->vendor == X86_VENDOR_INTEL) - w83795_init(THERMAL_CRUISE_MODE, DTS_SRC_INTEL_PECI); + w83795_init(dev, THERMAL_CRUISE_MODE, DTS_SRC_INTEL_PECI); else printk(BIOS_ERR, "Neither AMD nor INTEL CPU detected\n"); } |