diff options
author | Timothy Pearson <tpearson@raptorengineeringinc.com> | 2015-11-24 14:12:01 -0600 |
---|---|---|
committer | Martin Roth <martinroth@google.com> | 2016-02-01 22:10:46 +0100 |
commit | 448e386309c20ed1d22360e06192b632af0af720 (patch) | |
tree | 61f1b0a1c8ccb65a5efda1e6571b9edd7051bc98 /src/drivers | |
parent | c2ed40b48ae3e9874213d4e70e1ac3c5fbbba8fc (diff) | |
download | coreboot-448e386309c20ed1d22360e06192b632af0af720.tar.xz |
drivers/pc80: Add PS/2 mouse presence detect
On certain Winbond SuperIO devices, when a PS/2 mouse is not
present on the auxiliary channel both channels will cease to
function if the auxiliary channel is probed while the primary
channel is active. Therefore, knowledge of mouse presence
must be gathered by coreboot during early boot, and used to
enable or disable the auxiliary PS/2 port before control is
passed to the operating system.
Add auxiliary channel PS/2 device presence detect, and update
the Winbond W83667HG-A driver to flag the auxiliary channel as
disabled if no device was detected.
Change-Id: I76274493dacc9016ac6d0dff8548d1dc931c6266
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13165
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Diffstat (limited to 'src/drivers')
-rw-r--r-- | src/drivers/pc80/keyboard.c | 101 |
1 files changed, 78 insertions, 23 deletions
diff --git a/src/drivers/pc80/keyboard.c b/src/drivers/pc80/keyboard.c index 3e61a51cab..56b1fce93b 100644 --- a/src/drivers/pc80/keyboard.c +++ b/src/drivers/pc80/keyboard.c @@ -1,6 +1,7 @@ /* * This file is part of the coreboot project. * + * Copyright (C) 2015 Raptor Engineering * Copyright (C) 2009 coresystems GmbH * Copyright (C) 2008 Advanced Micro Devices, Inc. * Copyright (C) 2003 Ollie Lo <ollielo@hotmail.com> @@ -32,6 +33,8 @@ // Keyboard Controller Commands #define KBC_CMD_READ_COMMAND 0x20 // Read command byte #define KBC_CMD_WRITE_COMMAND 0x60 // Write command byte +#define KBC_CMD_AUX_ENABLE 0xA8 // Auxiliary Interface enable +#define KBC_CMD_AUX_TEST 0xA9 // Auxiliary Interface test #define KBC_CMD_SELF_TEST 0xAA // Controller self-test #define KBC_CMD_KBD_TEST 0xAB // Keyboard Interface test @@ -106,9 +109,14 @@ static int kbc_cleanup_buffers(void) return !!timeout; } -static enum cb_err kbc_self_test(void) +static enum cb_err kbc_self_test(uint8_t probe_aux, uint8_t *aux_probe_result) { - u8 self_test; + uint8_t self_test; + uint8_t byte; + + /* Set initial aux probe output value */ + if (aux_probe_result) + *aux_probe_result = 0; /* Clean up any junk that might have been in the KBC. * Both input and output buffers must be empty. @@ -154,6 +162,48 @@ static enum cb_err kbc_self_test(void) return CB_KBD_INTERFACE_FAILURE; } + if (probe_aux) { + /* aux interface detect */ + outb(KBC_CMD_AUX_ENABLE, KBD_COMMAND); + if (!kbc_input_buffer_empty()) { + printk(BIOS_ERR, "Timeout waiting for controller during aux enable.\n"); + return CB_KBD_CONTROLLER_FAILURE; + } + outb(KBC_CMD_READ_COMMAND, KBD_COMMAND); + if (!kbc_output_buffer_full()) { + printk(BIOS_ERR, "Timeout waiting for controller during aux probe.\n"); + return CB_KBD_CONTROLLER_FAILURE; + } + + byte = inb(KBD_DATA); + if (!(byte & (0x1 << 5))) { + printk(BIOS_DEBUG, "PS/2 auxiliary channel detected...\n"); + + /* auxiliary interface test */ + outb(KBC_CMD_AUX_TEST, KBD_COMMAND); + + if (!kbc_output_buffer_full()) { + printk(BIOS_ERR, "Auxiliary channel probe timed out.\n"); + goto aux_failure; + } + + /* read test result, 0x00 should be returned in case of no failures */ + self_test = inb(KBD_DATA); + + if (self_test != 0x00) { + printk(BIOS_ERR, "No device detected on auxiliary channel: 0x%x\n", + self_test); + goto aux_failure; + } + + printk(BIOS_DEBUG, "PS/2 device detected on auxiliary channel\n"); + if (aux_probe_result) + *aux_probe_result = 1; + } + } + +aux_failure: + return CB_SUCCESS; } @@ -187,53 +237,54 @@ static u8 send_keyboard(u8 command) return regval; } -void pc_keyboard_init(void) +uint8_t pc_keyboard_init(uint8_t probe_aux) { u8 retries; u8 regval; enum cb_err err; + uint8_t aux_dev_detected; if (!CONFIG_DRIVERS_PS2_KEYBOARD) - return; + return 0; if (acpi_is_wakeup_s3()) - return; + return 0; printk(BIOS_DEBUG, "Keyboard init...\n"); /* Run a keyboard controller self-test */ - err = kbc_self_test(); + err = kbc_self_test(probe_aux, &aux_dev_detected); /* Ignore iterface failure as it's non-fatal. */ if (err != CB_SUCCESS && err != CB_KBD_INTERFACE_FAILURE) - return; + return 0; /* Enable keyboard interface - No IRQ */ if (!kbc_input_buffer_empty()) - return; + return 0; outb(0x60, KBD_COMMAND); if (!kbc_input_buffer_empty()) - return; + return 0; outb(0x20, KBD_DATA); /* send cmd: enable keyboard */ if (!kbc_input_buffer_empty()) { printk(BIOS_INFO, "Timeout while enabling keyboard\n"); - return; + return 0; } /* clean up any junk that might have been in the keyboard */ if (!kbc_cleanup_buffers()) - return; + return 0; /* reset keyboard and self test (keyboard side) */ regval = send_keyboard(0xFF); if (regval == KBD_REPLY_RESEND) { /* keeps sending RESENDs, probably no keyboard. */ printk(BIOS_INFO, "No PS/2 keyboard detected.\n"); - return; + return 0; } if (regval != KBD_REPLY_ACK) { printk(BIOS_ERR, "Keyboard reset failed ACK: 0x%x\n", regval); - return; + return 0; } /* the reset command takes some time, so wait a little longer */ @@ -241,14 +292,14 @@ void pc_keyboard_init(void) if (!kbc_output_buffer_full()) { printk(BIOS_ERR, "Timeout waiting for keyboard after reset.\n"); - return; + return 0; } regval = inb(KBD_DATA); if (regval != 0xAA) { printk(BIOS_ERR, "Keyboard reset selftest failed: 0x%x\n", regval); - return; + return 0; } /* @@ -260,7 +311,7 @@ void pc_keyboard_init(void) regval = send_keyboard(0xF5); if (regval != KBD_REPLY_ACK) { printk(BIOS_ERR, "Keyboard disable failed ACK: 0x%x\n", regval); - return; + return 0; } /* Set scancode command */ @@ -268,34 +319,38 @@ void pc_keyboard_init(void) if (regval != KBD_REPLY_ACK) { printk(BIOS_ERR, "Keyboard set scancode cmd failed ACK: 0x%x\n", regval); - return; + return 0; } /* Set scancode mode 2 */ regval = send_keyboard(0x02); if (regval != KBD_REPLY_ACK) { printk(BIOS_ERR, "Keyboard set scancode mode failed ACK: 0x%x\n", regval); - return; + return 0; } /* All is well - enable keyboard interface */ if (!kbc_input_buffer_empty()) - return; + return 0; outb(0x60, KBD_COMMAND); if (!kbc_input_buffer_empty()) - return; + return 0; outb(0x65, KBD_DATA); /* send cmd: enable keyboard and IRQ 1 */ if (!kbc_input_buffer_empty()) { printk(BIOS_ERR, "Timeout during keyboard enable\n"); - return; + return 0; } /* enable the keyboard */ regval = send_keyboard(0xF4); if (regval != KBD_REPLY_ACK) { printk(BIOS_ERR, "Keyboard enable failed ACK: 0x%x\n", regval); - return; + return 0; } + + printk(BIOS_DEBUG, "PS/2 keyboard initialized on primary channel\n"); + + return aux_dev_detected; } /* @@ -308,7 +363,7 @@ void set_kbc_ps2_mode(void) enum cb_err err; /* Run a keyboard controller self-test */ - err = kbc_self_test(); + err = kbc_self_test(0, NULL); /* Ignore iterface failure as it's non-fatal. */ if (err != CB_SUCCESS && err != CB_KBD_INTERFACE_FAILURE) return; |