usbdebug: Move Kconfig under drivers/usb

This menu may become a bit more complicated with addition of
new USB hardware so move it out of console/.

Change-Id: Ieb330675b9227a3e53d093f7c2b5a65e3842dc82
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5307
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>

2 files changed, 95 insertions, 0 deletions

diff --git a/src/drivers/Kconfig b/src/drivers/Kconfig
index 01bed21059..5267ff8f5d 100644
--- a/src/drivers/Kconfig
+++ b/src/drivers/Kconfig
@@ -38,4 +38,5 @@ source src/drivers/spi/Kconfig
 source src/drivers/ti/Kconfig
 source src/drivers/trident/Kconfig
 source src/drivers/uart/Kconfig
+source src/drivers/usb/Kconfig
 source src/drivers/xpowers/Kconfig
diff --git a/src/drivers/usb/Kconfig b/src/drivers/usb/Kconfig
new file mode 100644
index 0000000000..28b95c6263
--- /dev/null
+++ b/src/drivers/usb/Kconfig
@@ -0,0 +1,94 @@
+	# Use "select HAVE_USBDEBUG" on southbridges which have Debug Port code.
+config HAVE_USBDEBUG
+	bool
+	default y if HAVE_USBDEBUG_OPTIONS
+	default n
+
+# Use "select HAVE_USBDEBUG_OPTIONS" on southbridges with multiple
+# EHCI controllers or multiple ports with Debug Port capability
+config HAVE_USBDEBUG_OPTIONS
+	def_bool n
+
+config USBDEBUG
+	bool "USB 2.0 EHCI debug dongle support"
+	default n
+	depends on HAVE_USBDEBUG
+	help
+	  This option allows you to use a so-called USB EHCI Debug device
+	  (such as the Ajays NET20DC, AMIDebug RX, or a system using the
+	  Linux "EHCI Debug Device gadget" driver found in recent kernel)
+	  to retrieve the coreboot debug messages (instead, or in addition
+	  to, a serial port).
+
+	  This feature is NOT supported on all chipsets in coreboot!
+
+	  It also requires a USB2 controller which supports the EHCI
+	  Debug Port capability.
+
+	  See http://www.coreboot.org/EHCI_Debug_Port for an up-to-date list
+	  of supported controllers.
+
+	  If unsure, say N.
+
+if USBDEBUG
+
+config USBDEBUG_IN_ROMSTAGE
+	bool "Enable early (pre-RAM) usbdebug"
+	default y
+	depends on EARLY_CBMEM_INIT && EARLY_CONSOLE
+	help
+	   Configuring USB controllers in system-agent binary may cause
+	   problems to usbdebug. Disabling this option delays usbdebug to
+	   be setup on entry to ramstage.
+
+	   If unsure, say Y.
+
+config USBDEBUG_HCD_INDEX
+	int
+	default 0
+	prompt "Index for EHCI controller to use with usbdebug" if HAVE_USBDEBUG_OPTIONS
+	help
+	   Some boards have multiple EHCI controllers with possibly only
+	   one having the Debug Port capability on an external USB port.
+
+	   Mapping of this index to PCI device functions is southbridge
+	   specific and mainboard level Kconfig should already provide
+	   a working default value here.
+
+config USBDEBUG_DEFAULT_PORT
+	int
+	default 0
+	prompt "Default USB port to use as Debug Port" if HAVE_USBDEBUG_OPTIONS
+	help
+	  Selects which physical USB port usbdebug dongle is connected to.
+	  Setting of 0 means to scan possible ports starting from 1.
+
+	  Intel platforms have hardwired the debug port location and this
+	  setting makes no difference there.
+
+	  Hence, if you select the correct port here, you can speed up
+	  your boot time. Which USB port number refers to which actual
+	  port on your mainboard (potentially also USB pin headers on
+	  your mainboard) is highly board-specific, and you'll likely
+	  have to find out by trial-and-error.
+
+choice
+	prompt "Type of dongle"
+	default USBDEBUG_DONGLE_STD
+
+config USBDEBUG_DONGLE_STD
+	bool "Net20DC or compatible"
+
+config USBDEBUG_DONGLE_BEAGLEBONE
+	bool "BeagleBone"
+	help
+	  Use this to configure the USB hub on BeagleBone board.
+
+endchoice
+
+config USBDEBUG_OPTIONAL_HUB_PORT
+	int
+	default 2 if USBDEBUG_DONGLE_BEAGLEBONE
+	default 0
+
+endif # USBDEBUG