summaryrefslogtreecommitdiff
path: root/src/ec/google
diff options
context:
space:
mode:
authorDuncan Laurie <dlaurie@chromium.org>2013-06-03 10:38:22 -0700
committerStefan Reinauer <stefan.reinauer@coreboot.org>2013-07-10 21:44:09 +0200
commit433432b6544fc57c7998a66aaa34c45609e4fc8c (patch)
tree4e8e7977396504b8efae05504097a448ef86a3e4 /src/ec/google
parente8b08ba47c8b17480bd94eef7dc8a47629191957 (diff)
downloadcoreboot-433432b6544fc57c7998a66aaa34c45609e4fc8c.tar.xz
chrome ec: Update EC header from EC repository
- Updated ec_commands.h is copied in directly from EC repo - Removed "old" interface and update resources for "new" interface - Updated temp sensor constants and added "not calibrated" - Update mainboards to remove check for EC_SWITCH_KEYBOARD_RECOVERY Change-Id: Ic93c1914f86b6f5bc224178270624ed92b5c1e15 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/3743 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Diffstat (limited to 'src/ec/google')
-rw-r--r--src/ec/google/chromeec/acpi/ec.asl7
-rw-r--r--src/ec/google/chromeec/acpi/superio.asl14
-rw-r--r--src/ec/google/chromeec/ec_commands.h576
-rw-r--r--src/ec/google/chromeec/ec_lpc.c50
4 files changed, 523 insertions, 124 deletions
diff --git a/src/ec/google/chromeec/acpi/ec.asl b/src/ec/google/chromeec/acpi/ec.asl
index cb196a7065..24519c272f 100644
--- a/src/ec/google/chromeec/acpi/ec.asl
+++ b/src/ec/google/chromeec/acpi/ec.asl
@@ -29,9 +29,10 @@ Device (EC0)
Name (_UID, 1)
Name (_GPE, EC_SCI_GPI)
Name (TOFS, EC_TEMP_SENSOR_OFFSET)
- Name (TNOP, 0xFD) // Thermal sensor has no power
- Name (TBAD, 0xFE) // Thermal sensor bad reading
- Name (TNPR, 0xFF) // Thermal sensor not present
+ Name (TNCA, EC_TEMP_SENSOR_NOT_CALIBRATED)
+ Name (TNOP, EC_TEMP_SENSOR_NOT_POWERED)
+ Name (TBAD, EC_TEMP_SENSOR_ERROR)
+ Name (TNPR, EC_TEMP_SENSOR_NOT_PRESENT)
Name (DWRN, 15) // Battery capacity warning at 15%
Name (DLOW, 10) // Battery capacity low at 10%
diff --git a/src/ec/google/chromeec/acpi/superio.asl b/src/ec/google/chromeec/acpi/superio.asl
index 56f0f185c6..4f7133288a 100644
--- a/src/ec/google/chromeec/acpi/superio.asl
+++ b/src/ec/google/chromeec/acpi/superio.asl
@@ -29,8 +29,8 @@
* SIO_EC_HOST_ENABLE : Enable EC host command interface resources
* EC_LPC_ADDR_HOST_DATA : EC host command interface data port
* EC_LPC_ADDR_HOST_CMD : EC host command interface command port
- * EC_LPC_ADDR_OLD_PARAM : EC host command parameter range base (old)
- * EC_OLD_PARAM_SIZE : Parameter buffer size (old)
+ * EC_LPC_ADDR_HOST_ARGS : EC host command arguments
+ * EC_LPC_ADDR_HOST_PARAM : EC host command parameter buffer
*/
// Scope is \_SB.PCI0.LPCB
@@ -75,8 +75,9 @@ Device (SIO) {
{
FixedIO (EC_LPC_ADDR_HOST_DATA, 1)
FixedIO (EC_LPC_ADDR_HOST_CMD, 1)
- FixedIO (EC_LPC_ADDR_OLD_PARAM,
- EC_OLD_PARAM_SIZE)
+ FixedIO (EC_LPC_ADDR_HOST_ARGS, 4)
+ FixedIO (EC_LPC_ADDR_HOST_PARAM,
+ EC_HOST_PARAM_SIZE)
})
Name (_PRS, ResourceTemplate ()
@@ -84,8 +85,9 @@ Device (SIO) {
StartDependentFn (0, 0) {
FixedIO (EC_LPC_ADDR_HOST_DATA, 1)
FixedIO (EC_LPC_ADDR_HOST_CMD, 1)
- FixedIO (EC_LPC_ADDR_OLD_PARAM,
- EC_OLD_PARAM_SIZE)
+ FixedIO (EC_LPC_ADDR_HOST_ARGS, 4)
+ FixedIO (EC_LPC_ADDR_HOST_PARAM,
+ EC_HOST_PARAM_SIZE)
}
EndDependentFn ()
})
diff --git a/src/ec/google/chromeec/ec_commands.h b/src/ec/google/chromeec/ec_commands.h
index 10a74022af..952615d768 100644
--- a/src/ec/google/chromeec/ec_commands.h
+++ b/src/ec/google/chromeec/ec_commands.h
@@ -1,4 +1,4 @@
-/* Copyright (c) 2012 The Chromium OS Authors. All rights reserved.
+/* Copyright (c) 2013 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
@@ -46,10 +46,6 @@
#define EC_LPC_ADDR_HOST_PARAM 0x804
#define EC_HOST_PARAM_SIZE 0x0fc /* Size of param area in bytes */
-/* I/O addresses for host command params, old interface */
-#define EC_LPC_ADDR_OLD_PARAM 0x880
-#define EC_OLD_PARAM_SIZE 0x080 /* Size of param area in bytes */
-
/* EC command register bit functions */
#define EC_LPC_CMDR_DATA (1 << 0) /* Data ready for host to read */
#define EC_LPC_CMDR_PENDING (1 << 1) /* Write pending to EC */
@@ -96,10 +92,11 @@
*
* Valid only if EC_MEMMAP_THERMAL_VERSION returns >= 2.
*/
-#define EC_TEMP_SENSOR_B_ENTRIES 8
-#define EC_TEMP_SENSOR_NOT_PRESENT 0xff
-#define EC_TEMP_SENSOR_ERROR 0xfe
-#define EC_TEMP_SENSOR_NOT_POWERED 0xfd
+#define EC_TEMP_SENSOR_B_ENTRIES 8
+#define EC_TEMP_SENSOR_NOT_PRESENT 0xff
+#define EC_TEMP_SENSOR_ERROR 0xfe
+#define EC_TEMP_SENSOR_NOT_POWERED 0xfd
+#define EC_TEMP_SENSOR_NOT_CALIBRATED 0xfc
/*
* The offset of temperature value stored in mapped memory. This allows
* reporting a temperature range of 200K to 454K = -73C to 181C.
@@ -121,8 +118,8 @@
#define EC_SWITCH_LID_OPEN 0x01
#define EC_SWITCH_POWER_BUTTON_PRESSED 0x02
#define EC_SWITCH_WRITE_PROTECT_DISABLED 0x04
-/* Recovery requested via keyboard */
-#define EC_SWITCH_KEYBOARD_RECOVERY 0x08
+/* Was recovery requested via keyboard; now unused. */
+#define EC_SWITCH_IGNORE1 0x08
/* Recovery requested via dedicated signal (from servo board) */
#define EC_SWITCH_DEDICATED_RECOVERY 0x10
/* Was fake developer mode switch; now unused. Remove in next refactor. */
@@ -135,6 +132,7 @@
/* Wireless switch flags */
#define EC_WIRELESS_SWITCH_WLAN 0x01
#define EC_WIRELESS_SWITCH_BLUETOOTH 0x02
+#define EC_WIRELESS_SWITCH_WWAN 0x04
/*
* This header file is used in coreboot both in C and ACPI code. The ACPI code
@@ -186,6 +184,10 @@ enum ec_status {
EC_RES_INVALID_RESPONSE = 5,
EC_RES_INVALID_VERSION = 6,
EC_RES_INVALID_CHECKSUM = 7,
+ EC_RES_IN_PROGRESS = 8, /* Accepted, command in progress */
+ EC_RES_UNAVAILABLE = 9, /* No response available */
+ EC_RES_TIMEOUT = 10, /* We got a timeout */
+ EC_RES_OVERFLOW = 11, /* Table / data overflow */
};
/*
@@ -388,6 +390,25 @@ struct ec_response_get_cmd_versions {
uint32_t version_mask;
} __packed;
+/*
+ * Check EC communcations status (busy). This is needed on i2c/spi but not
+ * on lpc since it has its own out-of-band busy indicator.
+ *
+ * lpc must read the status from the command register. Attempting this on
+ * lpc will overwrite the args/parameter space and corrupt its data.
+ */
+#define EC_CMD_GET_COMMS_STATUS 0x09
+
+/* Avoid using ec_status which is for return values */
+enum ec_comms_status {
+ EC_COMMS_STATUS_PROCESSING = 1 << 0, /* Processing cmd */
+};
+
+struct ec_response_get_comms_status {
+ uint32_t flags; /* Mask of enum ec_comms_status */
+} __packed;
+
+
/*****************************************************************************/
/* Flash commands */
@@ -468,8 +489,8 @@ struct ec_params_flash_erase {
* be changed.
*/
#define EC_FLASH_PROTECT_RO_NOW (1 << 1)
-/* RW flash code protected now, until reboot. */
-#define EC_FLASH_PROTECT_RW_NOW (1 << 2)
+/* Entire flash code protected now, until reboot. */
+#define EC_FLASH_PROTECT_ALL_NOW (1 << 2)
/* Flash write protect GPIO is asserted now */
#define EC_FLASH_PROTECT_GPIO_ASSERTED (1 << 3)
/* Error - at least one bank of flash is stuck locked, and cannot be unlocked */
@@ -480,8 +501,8 @@ struct ec_params_flash_erase {
* re-requesting the desired flags, or by a hard reset if that fails.
*/
#define EC_FLASH_PROTECT_ERROR_INCONSISTENT (1 << 5)
-/* RW flash code protected when the EC boots */
-#define EC_FLASH_PROTECT_RW_AT_BOOT (1 << 6)
+/* Entile flash code protected when the EC boots */
+#define EC_FLASH_PROTECT_ALL_AT_BOOT (1 << 6)
struct ec_params_flash_protect {
uint32_t mask; /* Bits in flags to apply */
@@ -531,6 +552,24 @@ struct ec_response_flash_region_info {
uint32_t size;
} __packed;
+/* Read/write VbNvContext */
+#define EC_CMD_VBNV_CONTEXT 0x17
+#define EC_VER_VBNV_CONTEXT 1
+#define EC_VBNV_BLOCK_SIZE 16
+
+enum ec_vbnvcontext_op {
+ EC_VBNV_CONTEXT_OP_READ,
+ EC_VBNV_CONTEXT_OP_WRITE,
+};
+
+struct ec_params_vbnvcontext {
+ uint32_t op;
+ uint8_t block[EC_VBNV_BLOCK_SIZE];
+} __packed;
+
+struct ec_response_vbnvcontext {
+ uint8_t block[EC_VBNV_BLOCK_SIZE];
+} __packed;
/*****************************************************************************/
/* PWM commands */
@@ -573,52 +612,131 @@ struct ec_params_pwm_set_fan_duty {
/*****************************************************************************/
/*
- * Lightbar commands. This looks worse than it is. Since we only use one LPC
+ * Lightbar commands. This looks worse than it is. Since we only use one HOST
* command to say "talk to the lightbar", we put the "and tell it to do X" part
* into a subcommand. We'll make separate structs for subcommands with
* different input args, so that we know how much to expect.
*/
#define EC_CMD_LIGHTBAR_CMD 0x28
-struct ec_params_lightbar_cmd {
+struct rgb_s {
+ uint8_t r, g, b;
+};
+
+#define LB_BATTERY_LEVELS 4
+/* List of tweakable parameters. NOTE: It's __packed so it can be sent in a
+ * host command, but the alignment is the same regardless. Keep it that way.
+ */
+struct lightbar_params {
+ /* Timing */
+ int google_ramp_up;
+ int google_ramp_down;
+ int s3s0_ramp_up;
+ int s0_tick_delay[2]; /* AC=0/1 */
+ int s0a_tick_delay[2]; /* AC=0/1 */
+ int s0s3_ramp_down;
+ int s3_sleep_for;
+ int s3_ramp_up;
+ int s3_ramp_down;
+
+ /* Oscillation */
+ uint8_t new_s0;
+ uint8_t osc_min[2]; /* AC=0/1 */
+ uint8_t osc_max[2]; /* AC=0/1 */
+ uint8_t w_ofs[2]; /* AC=0/1 */
+
+ /* Brightness limits based on the backlight and AC. */
+ uint8_t bright_bl_off_fixed[2]; /* AC=0/1 */
+ uint8_t bright_bl_on_min[2]; /* AC=0/1 */
+ uint8_t bright_bl_on_max[2]; /* AC=0/1 */
+
+ /* Battery level thresholds */
+ uint8_t battery_threshold[LB_BATTERY_LEVELS - 1];
+
+ /* Map [AC][battery_level] to color index */
+ uint8_t s0_idx[2][LB_BATTERY_LEVELS]; /* AP is running */
+ uint8_t s3_idx[2][LB_BATTERY_LEVELS]; /* AP is sleeping */
+
+ /* Color palette */
+ struct rgb_s color[8]; /* 0-3 are Google colors */
+} __packed;
+
+struct ec_params_lightbar {
+ uint8_t cmd; /* Command (see enum lightbar_command) */
union {
- union {
- uint8_t cmd;
- struct {
- uint8_t cmd;
- } dump, off, on, init, get_seq;
- struct num {
- uint8_t cmd;
- uint8_t num;
- } brightness, seq;
-
- struct reg {
- uint8_t cmd;
- uint8_t ctrl, reg, value;
- } reg;
- struct rgb {
- uint8_t cmd;
- uint8_t led, red, green, blue;
- } rgb;
- } in;
- union {
- struct dump {
- struct {
- uint8_t reg;
- uint8_t ic0;
- uint8_t ic1;
- } vals[23];
- } dump;
- struct get_seq {
- uint8_t num;
- } get_seq;
+ struct {
+ /* no args */
+ } dump, off, on, init, get_seq, get_params;
+
+ struct num {
+ uint8_t num;
+ } brightness, seq, demo;
+
+ struct reg {
+ uint8_t ctrl, reg, value;
+ } reg;
+
+ struct rgb {
+ uint8_t led, red, green, blue;
+ } rgb;
+
+ struct lightbar_params set_params;
+ };
+} __packed;
+
+struct ec_response_lightbar {
+ union {
+ struct dump {
struct {
- /* no return params */
- } off, on, init, brightness, seq, reg, rgb;
- } out;
+ uint8_t reg;
+ uint8_t ic0;
+ uint8_t ic1;
+ } vals[23];
+ } dump;
+
+ struct get_seq {
+ uint8_t num;
+ } get_seq;
+
+ struct lightbar_params get_params;
+
+ struct {
+ /* no return params */
+ } off, on, init, brightness, seq, reg, rgb, demo, set_params;
};
} __packed;
+/* Lightbar commands */
+enum lightbar_command {
+ LIGHTBAR_CMD_DUMP = 0,
+ LIGHTBAR_CMD_OFF = 1,
+ LIGHTBAR_CMD_ON = 2,
+ LIGHTBAR_CMD_INIT = 3,
+ LIGHTBAR_CMD_BRIGHTNESS = 4,
+ LIGHTBAR_CMD_SEQ = 5,
+ LIGHTBAR_CMD_REG = 6,
+ LIGHTBAR_CMD_RGB = 7,
+ LIGHTBAR_CMD_GET_SEQ = 8,
+ LIGHTBAR_CMD_DEMO = 9,
+ LIGHTBAR_CMD_GET_PARAMS = 10,
+ LIGHTBAR_CMD_SET_PARAMS = 11,
+ LIGHTBAR_NUM_CMDS
+};
+
+/*****************************************************************************/
+/* LED control commands */
+
+#define EC_CMD_LED_SET 0x29
+
+#define EC_LED_FLAGS_AUTO (1 << 1)
+
+struct ec_params_led_set {
+ uint8_t r;
+ uint8_t g;
+ uint8_t b; /* Used as yellow if there is no blue LED */
+ uint8_t flags;
+} __packed;
+
/*****************************************************************************/
/* Verified boot commands */
@@ -651,22 +769,30 @@ struct ec_response_vboot_hash {
} __packed;
enum ec_vboot_hash_cmd {
- EC_VBOOT_HASH_GET, /* Get current hash status */
- EC_VBOOT_HASH_ABORT, /* Abort calculating current hash */
- EC_VBOOT_HASH_START, /* Start computing a new hash */
- EC_VBOOT_HASH_RECALC, /* Synchronously compute a new hash */
+ EC_VBOOT_HASH_GET = 0, /* Get current hash status */
+ EC_VBOOT_HASH_ABORT = 1, /* Abort calculating current hash */
+ EC_VBOOT_HASH_START = 2, /* Start computing a new hash */
+ EC_VBOOT_HASH_RECALC = 3, /* Synchronously compute a new hash */
};
enum ec_vboot_hash_type {
- EC_VBOOT_HASH_TYPE_SHA256, /* SHA-256 */
+ EC_VBOOT_HASH_TYPE_SHA256 = 0, /* SHA-256 */
};
enum ec_vboot_hash_status {
- EC_VBOOT_HASH_STATUS_NONE, /* No hash (not started, or aborted) */
- EC_VBOOT_HASH_STATUS_DONE, /* Finished computing a hash */
- EC_VBOOT_HASH_STATUS_BUSY, /* Busy computing a hash */
+ EC_VBOOT_HASH_STATUS_NONE = 0, /* No hash (not started, or aborted) */
+ EC_VBOOT_HASH_STATUS_DONE = 1, /* Finished computing a hash */
+ EC_VBOOT_HASH_STATUS_BUSY = 2, /* Busy computing a hash */
};
+/*
+ * Special values for offset for EC_VBOOT_HASH_START and EC_VBOOT_HASH_RECALC.
+ * If one of these is specified, the EC will automatically update offset and
+ * size to the correct values for the specified image (RO or RW).
+ */
+#define EC_VBOOT_HASH_OFFSET_RO 0xfffffffe
+#define EC_VBOOT_HASH_OFFSET_RW 0xfffffffd
+
/*****************************************************************************/
/* USB charging control commands */
@@ -772,6 +898,32 @@ struct ec_response_thermal_get_threshold {
/* Toggle automatic fan control */
#define EC_CMD_THERMAL_AUTO_FAN_CTRL 0x52
+/* Get TMP006 calibration data */
+#define EC_CMD_TMP006_GET_CALIBRATION 0x53
+
+struct ec_params_tmp006_get_calibration {
+ uint8_t index;
+} __packed;
+
+struct ec_response_tmp006_get_calibration {
+ float s0;
+ float b0;
+ float b1;
+ float b2;
+} __packed;
+
+/* Set TMP006 calibration data */
+#define EC_CMD_TMP006_SET_CALIBRATION 0x54
+
+struct ec_params_tmp006_set_calibration {
+ uint8_t index;
+ uint8_t reserved[3]; /* Reserved; set 0 */
+ float s0;
+ float b0;
+ float b1;
+ float b2;
+} __packed;
+
/*****************************************************************************/
/* MKBP - Matrix KeyBoard Protocol */
@@ -801,6 +953,112 @@ struct ec_params_mkbp_simulate_key {
uint8_t pressed;
} __packed;
+/* Configure keyboard scanning */
+#define EC_CMD_MKBP_SET_CONFIG 0x64
+#define EC_CMD_MKBP_GET_CONFIG 0x65
+
+/* flags */
+enum mkbp_config_flags {
+ EC_MKBP_FLAGS_ENABLE = 1, /* Enable keyboard scanning */
+};
+
+enum mkbp_config_valid {
+ EC_MKBP_VALID_SCAN_PERIOD = 1 << 0,
+ EC_MKBP_VALID_POLL_TIMEOUT = 1 << 1,
+ EC_MKBP_VALID_MIN_POST_SCAN_DELAY = 1 << 3,
+ EC_MKBP_VALID_OUTPUT_SETTLE = 1 << 4,
+ EC_MKBP_VALID_DEBOUNCE_DOWN = 1 << 5,
+ EC_MKBP_VALID_DEBOUNCE_UP = 1 << 6,
+ EC_MKBP_VALID_FIFO_MAX_DEPTH = 1 << 7,
+};
+
+/* Configuration for our key scanning algorithm */
+struct ec_mkbp_config {
+ uint32_t valid_mask; /* valid fields */
+ uint8_t flags; /* some flags (enum mkbp_config_flags) */
+ uint8_t valid_flags; /* which flags are valid */
+ uint16_t scan_period_us; /* period between start of scans */
+ /* revert to interrupt mode after no activity for this long */
+ uint32_t poll_timeout_us;
+ /*
+ * minimum post-scan relax time. Once we finish a scan we check
+ * the time until we are due to start the next one. If this time is
+ * shorter this field, we use this instead.
+ */
+ uint16_t min_post_scan_delay_us;
+ /* delay between setting up output and waiting for it to settle */
+ uint16_t output_settle_us;
+ uint16_t debounce_down_us; /* time for debounce on key down */
+ uint16_t debounce_up_us; /* time for debounce on key up */
+ /* maximum depth to allow for fifo (0 = no keyscan output) */
+ uint8_t fifo_max_depth;
+} __packed;
+
+struct ec_params_mkbp_set_config {
+ struct ec_mkbp_config config;
+} __packed;
+
+struct ec_response_mkbp_get_config {
+ struct ec_mkbp_config config;
+} __packed;
+
+/* Run the key scan emulation */
+#define EC_CMD_KEYSCAN_SEQ_CTRL 0x66
+
+enum ec_keyscan_seq_cmd {
+ EC_KEYSCAN_SEQ_STATUS = 0, /* Get status information */
+ EC_KEYSCAN_SEQ_CLEAR = 1, /* Clear sequence */
+ EC_KEYSCAN_SEQ_ADD = 2, /* Add item to sequence */
+ EC_KEYSCAN_SEQ_START = 3, /* Start running sequence */
+ EC_KEYSCAN_SEQ_COLLECT = 4, /* Collect sequence summary data */
+};
+
+enum ec_collect_flags {
+ /*
+ * Indicates this scan was processed by the EC. Due to timing, some
+ * scans may be skipped.
+ */
+ EC_KEYSCAN_SEQ_FLAG_DONE = 1 << 0,
+};
+
+struct ec_collect_item {
+ uint8_t flags; /* some flags (enum ec_collect_flags) */
+};
+
+struct ec_params_keyscan_seq_ctrl {
+ uint8_t cmd; /* Command to send (enum ec_keyscan_seq_cmd) */
+ union {
+ struct {
+ uint8_t active; /* still active */
+ uint8_t num_items; /* number of items */
+ /* Current item being presented */
+ uint8_t cur_item;
+ } status;
+ struct {
+ /*
+ * Absolute time for this scan, measured from the
+ * start of the sequence.
+ */
+ uint32_t time_us;
+ uint8_t scan[0]; /* keyscan data */
+ } add;
+ struct {
+ uint8_t start_item; /* First item to return */
+ uint8_t num_items; /* Number of items to return */
+ } collect;
+ };
+} __packed;
+
+struct ec_result_keyscan_seq_ctrl {
+ union {
+ struct {
+ uint8_t num_items; /* Number of items */
+ /* Data for each item */
+ struct ec_collect_item item[0];
+ } collect;
+ };
+} __packed;
+
/*****************************************************************************/
/* Temperature sensor commands */
@@ -897,7 +1155,7 @@ struct ec_response_gpio_get {
#define EC_CMD_I2C_READ 0x94
struct ec_params_i2c_read {
- uint16_t addr;
+ uint16_t addr; /* 8-bit address (7-bit shifted << 1) */
uint8_t read_size; /* Either 8 or 16. */
uint8_t port;
uint8_t offset;
@@ -911,7 +1169,7 @@ struct ec_response_i2c_read {
struct ec_params_i2c_write {
uint16_t data;
- uint16_t addr;
+ uint16_t addr; /* 8-bit address (7-bit shifted << 1) */
uint8_t write_size; /* Either 8 or 16. */
uint8_t port;
uint8_t offset;
@@ -942,6 +1200,177 @@ struct ec_params_force_idle {
#define EC_CMD_CONSOLE_READ 0x98
/*****************************************************************************/
+
+/*
+ * Cut off battery power output if the battery supports.
+ *
+ * For unsupported battery, just don't implement this command and lets EC
+ * return EC_RES_INVALID_COMMAND.
+ */
+#define EC_CMD_BATTERY_CUT_OFF 0x99
+
+/*****************************************************************************/
+/* USB port mux control. */
+
+/*
+ * Switch USB mux or return to automatic switching.
+ */
+#define EC_CMD_USB_MUX 0x9a
+
+struct ec_params_usb_mux {
+ uint8_t mux;
+} __packed;
+
+/*****************************************************************************/
+/* LDOs / FETs control. */
+
+enum ec_ldo_state {
+ EC_LDO_STATE_OFF = 0, /* the LDO / FET is shut down */
+ EC_LDO_STATE_ON = 1, /* the LDO / FET is ON / providing power */
+};
+
+/*
+ * Switch on/off a LDO.
+ */
+#define EC_CMD_LDO_SET 0x9b
+
+struct ec_params_ldo_set {
+ uint8_t index;
+ uint8_t state;
+} __packed;
+
+/*
+ * Get LDO state.
+ */
+#define EC_CMD_LDO_GET 0x9c
+
+struct ec_params_ldo_get {
+ uint8_t index;
+} __packed;
+
+struct ec_response_ldo_get {
+ uint8_t state;
+} __packed;
+
+/*****************************************************************************/
+/* Power info. */
+
+/*
+ * Get power info.
+ */
+#define EC_CMD_POWER_INFO 0x9d
+
+struct ec_response_power_info {
+ uint32_t usb_dev_type;
+ uint16_t voltage_ac;
+ uint16_t voltage_system;
+ uint16_t current_system;
+ uint16_t usb_current_limit;
+} __packed;
+
+/*****************************************************************************/
+/* I2C passthru command */
+
+#define EC_CMD_I2C_PASSTHRU 0x9e
+
+/* Slave address is 10 (not 7) bit */
+#define EC_I2C_FLAG_10BIT (1 << 16)
+
+/* Read data; if not present, message is a write */
+#define EC_I2C_FLAG_READ (1 << 15)
+
+/* Mask for address */
+#define EC_I2C_ADDR_MASK 0x3ff
+
+#define EC_I2C_STATUS_NAK (1 << 0) /* Transfer was not acknowledged */
+#define EC_I2C_STATUS_TIMEOUT (1 << 1) /* Timeout during transfer */
+
+/* Any error */
+#define EC_I2C_STATUS_ERROR (EC_I2C_STATUS_NAK | EC_I2C_STATUS_TIMEOUT)
+
+struct ec_params_i2c_passthru_msg {
+ uint16_t addr_flags; /* I2C slave address (7 or 10 bits) and flags */
+ uint16_t len; /* Number of bytes to read or write */
+} __packed;
+
+struct ec_params_i2c_passthru {
+ uint8_t port; /* I2C port number */
+ uint8_t num_msgs; /* Number of messages */
+ struct ec_params_i2c_passthru_msg msg[];
+ /* Data to write for all messages is concatenated here */
+} __packed;
+
+struct ec_response_i2c_passthru {
+ uint8_t i2c_status; /* Status flags (EC_I2C_STATUS_...) */
+ uint8_t num_msgs; /* Number of messages processed */
+ uint8_t data[]; /* Data read by messages concatenated here */
+} __packed;
+
+
+/*****************************************************************************/
+/* Temporary debug commands. TODO: remove this crosbug.com/p/13849 */
+
+/*
+ * Dump charge state machine context.
+ *
+ * Response is a binary dump of charge state machine context.
+ */
+#define EC_CMD_CHARGE_DUMP 0xa0
+
+/*
+ * Set maximum battery charging current.
+ */
+#define EC_CMD_CHARGE_CURRENT_LIMIT 0xa1
+
+struct ec_params_current_limit {
+ uint32_t limit; /* in mA */
+} __packed;
+
+/*
+ * Set maximum external power current.
+ */
+#define EC_CMD_EXT_POWER_CURRENT_LIMIT 0xa2
+
+struct ec_params_ext_power_current_limit {
+ uint32_t limit; /* in mA */
+} __packed;
+
+/*****************************************************************************/
+/* Smart battery pass-through */
+
+/* Get / Set 16-bit smart battery registers */
+#define EC_CMD_SB_READ_WORD 0xb0
+#define EC_CMD_SB_WRITE_WORD 0xb1
+
+/* Get / Set string smart battery parameters
+ * formatted as SMBUS "block".
+ */
+#define EC_CMD_SB_READ_BLOCK 0xb2
+#define EC_CMD_SB_WRITE_BLOCK 0xb3
+
+struct ec_params_sb_rd {
+ uint8_t reg;
+} __packed;
+
+struct ec_response_sb_rd_word {
+ uint16_t value;
+} __packed;
+
+struct ec_params_sb_wr_word {
+ uint8_t reg;
+ uint16_t value;
+} __packed;
+
+struct ec_response_sb_rd_block {
+ uint8_t data[32];
+} __packed;
+
+struct ec_params_sb_wr_block {
+ uint8_t reg;
+ uint16_t data[32];
+} __packed;
+
+/*****************************************************************************/
/* System commands */
/*
@@ -953,23 +1382,31 @@ struct ec_params_force_idle {
/* Command */
enum ec_reboot_cmd {
EC_REBOOT_CANCEL = 0, /* Cancel a pending reboot */
- EC_REBOOT_JUMP_RO, /* Jump to RO without rebooting */
- EC_REBOOT_JUMP_RW, /* Jump to RW without rebooting */
+ EC_REBOOT_JUMP_RO = 1, /* Jump to RO without rebooting */
+ EC_REBOOT_JUMP_RW = 2, /* Jump to RW without rebooting */
/* (command 3 was jump to RW-B) */
EC_REBOOT_COLD = 4, /* Cold-reboot */
- EC_REBOOT_DISABLE_JUMP, /* Disable jump until next reboot */
+ EC_REBOOT_DISABLE_JUMP = 5, /* Disable jump until next reboot */
+ EC_REBOOT_HIBERNATE = 6 /* Hibernate EC */
};
/* Flags for ec_params_reboot_ec.reboot_flags */
#define EC_REBOOT_FLAG_RESERVED0 (1 << 0) /* Was recovery request */
-#define EC_REBOOT_FLAG_ON_AP_SHUTDOWN (1 << 1)
-#define EC_REBOOT_FLAG_POWER_ON (1 << 2)
+#define EC_REBOOT_FLAG_ON_AP_SHUTDOWN (1 << 1) /* Reboot after AP shutdown */
struct ec_params_reboot_ec {
uint8_t cmd; /* enum ec_reboot_cmd */
uint8_t flags; /* See EC_REBOOT_FLAG_* */
} __packed;
+/*
+ * Get information on last EC panic.
+ *
+ * Returns variable-length platform-dependent panic information. See panic.h
+ * for details.
+ */
+#define EC_CMD_GET_PANIC_INFO 0xd3
+
/*****************************************************************************/
/*
* ACPI commands
@@ -1053,6 +1490,15 @@ struct ec_params_reboot_ec {
#define EC_CMD_REBOOT 0xd1 /* Think "die" */
/*
+ * Resend last response (not supported on LPC).
+ *
+ * Returns EC_RES_UNAVAILABLE if there is no response available - for example,
+ * there was no previous command, or the previous command's response was too
+ * big to save.
+ */
+#define EC_CMD_RESEND_RESPONSE 0xdb
+
+/*
* This header byte on a command indicate version 0. Any header byte less
* than this means that we are talking to an old EC which doesn't support
* versioning. In that case, we assume version 0.
diff --git a/src/ec/google/chromeec/ec_lpc.c b/src/ec/google/chromeec/ec_lpc.c
index 4e8d3fbb77..a445da87be 100644
--- a/src/ec/google/chromeec/ec_lpc.c
+++ b/src/ec/google/chromeec/ec_lpc.c
@@ -50,52 +50,6 @@ static int google_chromeec_wait_ready(u16 port)
return 0;
}
-static int google_chromeec_cmd_args_supported(void)
-{
- if (inb(EC_LPC_ADDR_MEMMAP + EC_MEMMAP_ID) == 'E' &&
- inb(EC_LPC_ADDR_MEMMAP + EC_MEMMAP_ID + 1) == 'C' &&
- (inb(EC_LPC_ADDR_MEMMAP + EC_MEMMAP_HOST_CMD_FLAGS) &
- EC_HOST_CMD_FLAG_LPC_ARGS_SUPPORTED))
- return 1;
-
- return 0;
-}
-
-static int google_chromeec_command_old(struct chromeec_command *cec_command)
-{
- int i;
-
- if (cec_command->cmd_version) {
- printk(BIOS_ERR, "Invalid version for command protocol!\n");
- return 1;
- }
-
- if (google_chromeec_wait_ready(EC_LPC_ADDR_HOST_CMD)) {
- printk(BIOS_ERR, "Timeout waiting for EC ready!\n");
- return 1;
- }
-
- /* Copy command data, if any. */
- for (i = 0; i < cec_command->cmd_size_in; i++)
- outb(((char*)cec_command->cmd_data_in)[i],
- EC_LPC_ADDR_OLD_PARAM + i);
-
- /* Issue the command. */
- outb(cec_command->cmd_code, EC_LPC_ADDR_HOST_CMD);
-
- if (google_chromeec_wait_ready(EC_LPC_ADDR_HOST_CMD)) {
- printk(BIOS_ERR, "Timeout waiting for EC process command %d!\n",
- cec_command->cmd_code);
- return 1;
- }
-
- for (i = 0; i < cec_command->cmd_size_out; i++)
- ((char*)cec_command->cmd_data_out)[i] =
- inb(EC_LPC_ADDR_OLD_PARAM + i);
- cec_command->cmd_code = inb(EC_LPC_ADDR_HOST_DATA);
- return 0;
-}
-
int google_chromeec_command(struct chromeec_command *cec_command)
{
struct ec_lpc_host_args args;
@@ -105,10 +59,6 @@ int google_chromeec_command(struct chromeec_command *cec_command)
int csum;
int i;
- /* Fall back to old command protocol if necessary */
- if (!google_chromeec_cmd_args_supported())
- return google_chromeec_command_old(cec_command);
-
/* Fill in args */
args.flags = EC_HOST_ARGS_FLAG_FROM_HOST;
args.command_version = cec_command->cmd_version;