summaryrefslogtreecommitdiff
path: root/src/include/uart8250.h
diff options
context:
space:
mode:
authorStefan Reinauer <stepan@coreboot.org>2010-12-17 00:08:21 +0000
committerStefan Reinauer <stepan@openbios.org>2010-12-17 00:08:21 +0000
commit85b0fa1ace685bfdb1f1febbbf5127710a314888 (patch)
tree11fac9795931c6cdca6a785301d9294e4ba9dcae /src/include/uart8250.h
parentefbfd501fee8decd0942808a47a3f9e93d30ae38 (diff)
downloadcoreboot-85b0fa1ace685bfdb1f1febbbf5127710a314888.tar.xz
drop one more version of doing serial uart output differently.
coreboot made it kind of complicated to print a character on serial. Not quite as complicated as UEFI, but too much for a good design. Fix it. Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6191 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/include/uart8250.h')
-rw-r--r--src/include/uart8250.h140
1 files changed, 138 insertions, 2 deletions
diff --git a/src/include/uart8250.h b/src/include/uart8250.h
index dc09315dea..47cc88ed01 100644
--- a/src/include/uart8250.h
+++ b/src/include/uart8250.h
@@ -1,15 +1,151 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2003 Eric Biederman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
#ifndef UART8250_H
#define UART8250_H
+/* Base Address */
+#ifndef CONFIG_TTYS0_BASE
+#define CONFIG_TTYS0_BASE 0x3f8
+#endif
+
+#ifndef CONFIG_TTYS0_BAUD
+#define CONFIG_TTYS0_BAUD 115200
+#endif
+
+#ifndef CONFIG_TTYS0_DIV
+#if ((115200%CONFIG_TTYS0_BAUD) != 0)
+#error Bad ttys0 baud rate
+#endif
+#define CONFIG_TTYS0_DIV (115200/CONFIG_TTYS0_BAUD)
+#endif
+
+/* Line Control Settings */
+#ifndef CONFIG_TTYS0_LCS
+/* Set 8bit, 1 stop bit, no parity */
+#define CONFIG_TTYS0_LCS 0x3
+#endif
+
+#define UART_LCS CONFIG_TTYS0_LCS
+
+
+/* Data */
+#define UART_RBR 0x00
+#define UART_TBR 0x00
+
+/* Control */
+#define UART_IER 0x01
+#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */
+#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */
+#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */
+#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */
+
+#define UART_IIR 0x02
+#define UART_IIR_NO_INT 0x01 /* No interrupts pending */
+#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */
+
+#define UART_IIR_MSI 0x00 /* Modem status interrupt */
+#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */
+#define UART_IIR_RDI 0x04 /* Receiver data interrupt */
+#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */
+
+#define UART_FCR 0x02
+#define UART_FCR_FIFO_EN 0x01 /* Fifo enable */
+#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */
+#define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */
+#define UART_FCR_DMA_SELECT 0x08 /* For DMA applications */
+#define UART_FCR_TRIGGER_MASK 0xC0 /* Mask for the FIFO trigger range */
+#define UART_FCR_TRIGGER_1 0x00 /* Mask for trigger set at 1 */
+#define UART_FCR_TRIGGER_4 0x40 /* Mask for trigger set at 4 */
+#define UART_FCR_TRIGGER_8 0x80 /* Mask for trigger set at 8 */
+#define UART_FCR_TRIGGER_14 0xC0 /* Mask for trigger set at 14 */
+
+#define UART_FCR_RXSR 0x02 /* Receiver soft reset */
+#define UART_FCR_TXSR 0x04 /* Transmitter soft reset */
+
+#define UART_LCR 0x03
+#define UART_LCR_WLS_MSK 0x03 /* character length select mask */
+#define UART_LCR_WLS_5 0x00 /* 5 bit character length */
+#define UART_LCR_WLS_6 0x01 /* 6 bit character length */
+#define UART_LCR_WLS_7 0x02 /* 7 bit character length */
+#define UART_LCR_WLS_8 0x03 /* 8 bit character length */
+#define UART_LCR_STB 0x04 /* Number of stop Bits, off = 1, on = 1.5 or 2) */
+#define UART_LCR_PEN 0x08 /* Parity eneble */
+#define UART_LCR_EPS 0x10 /* Even Parity Select */
+#define UART_LCR_STKP 0x20 /* Stick Parity */
+#define UART_LCR_SBRK 0x40 /* Set Break */
+#define UART_LCR_BKSE 0x80 /* Bank select enable */
+#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */
+
+#define UART_MCR 0x04
+#define UART_MCR_DTR 0x01 /* DTR */
+#define UART_MCR_RTS 0x02 /* RTS */
+#define UART_MCR_OUT1 0x04 /* Out 1 */
+#define UART_MCR_OUT2 0x08 /* Out 2 */
+#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */
+
+#define UART_MCR_DMA_EN 0x04
+#define UART_MCR_TX_DFR 0x08
+
+#define UART_DLL 0x00
+#define UART_DLM 0x01
+
+/* Status */
+#define UART_LSR 0x05
+#define UART_LSR_DR 0x01 /* Data ready */
+#define UART_LSR_OE 0x02 /* Overrun */
+#define UART_LSR_PE 0x04 /* Parity error */
+#define UART_LSR_FE 0x08 /* Framing error */
+#define UART_LSR_BI 0x10 /* Break */
+#define UART_LSR_THRE 0x20 /* Xmit holding register empty */
+#define UART_LSR_TEMT 0x40 /* Xmitter empty */
+#define UART_LSR_ERR 0x80 /* Error */
+
+#define UART_MSR 0x06
+#define UART_MSR_DCD 0x80 /* Data Carrier Detect */
+#define UART_MSR_RI 0x40 /* Ring Indicator */
+#define UART_MSR_DSR 0x20 /* Data Set Ready */
+#define UART_MSR_CTS 0x10 /* Clear to Send */
+#define UART_MSR_DDCD 0x08 /* Delta DCD */
+#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */
+#define UART_MSR_DDSR 0x02 /* Delta DSR */
+#define UART_MSR_DCTS 0x01 /* Delta CTS */
+
+#define UART_SCR 0x07
+
+
+#ifndef __ROMCC__
+// Can't we just drop this? It seems silly.
struct uart8250 {
unsigned int baud;
- /* Do I need an lcs parameter here? */
};
unsigned char uart8250_rx_byte(unsigned base_port);
int uart8250_can_rx_byte(unsigned base_port);
void uart8250_tx_byte(unsigned base_port, unsigned char data);
-void uart8250_init(unsigned base_port, unsigned divisor, unsigned lcs);
+
+/* Yes it is silly to have three different uart init functions. But we used to
+ * have three different sets of uart code, so it's an improvement.
+ */
+void uart8250_init(unsigned base_port, unsigned divisor);
void init_uart8250(unsigned base_port, struct uart8250 *uart);
+void uart_init(void);
+#endif
#endif /* UART8250_H */