unify spd_ddr2.h (trivial)

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4087 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 88 insertions, 0 deletions

diff --git a/src/include/spd_ddr2.h b/src/include/spd_ddr2.h
new file mode 100644
index 0000000000..a1deb36c96
--- /dev/null
+++ b/src/include/spd_ddr2.h
@@ -0,0 +1,88 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/* SPDs for DDR2 SDRAM */
+#define SPD_MEM_TYPE	2
+	#define SPD_MEM_TYPE_SDRAM_DDR	0x07
+	#define SPD_MEM_TYPE_SDRAM_DDR2	0x08
+
+#define SPD_DIMM_TYPE	20	/* x  bit0 or bit4 =1 mean registered*/
+	#define SPD_DIMM_TYPE_RDIMM	(1<<0)
+	#define SPD_DIMM_TYPE_UDIMM	(1<<1)
+	#define SPD_DIMM_TYPE_SODIMM	(1<<2)
+	#define SPD_DIMM_TYPE_uDIMM	(1<<3)
+	#define SPD_DIMM_TYPE_mRDIMM	(1<<4)
+	#define SPD_DIMM_TYPE_mUDIMM	(1<<5)
+#define SPD_MOD_ATTRIB	21
+	#define SPD_MOD_ATTRIB_DIFCK	0x20
+	#define SPD_MOD_ATTRIB_REGADC	0x11   /* x */
+	#define SPD_MOD_ATTRIB_PROBE	0x40
+
+#define SPD_DEV_ATTRIB	22  /* Device attributes --- general */
+#define SPD_DIMM_CONF_TYPE	11
+	#define SPD_DIMM_CONF_TYPE_ECC		0x02
+	#define SPD_DIMM_CONF_TYPE_ADDR_PARITY	0x04	 /* ? */
+
+#define SPD_ROW_NUM	3	/* Number of Row addresses */
+#define SPD_COL_NUM	4	/* Number of Column addresses */
+#define SPD_BANK_NUM	17	/* SDRAM Device attributes - Number of Banks on
+				 SDRAM device, it could be 0x4, 0x8, so address
+				 lines for that would be 2, and 3 */
+
+/* Number of Ranks bit [2:0], Package (bit4, 1=stack, 0=planr), Height bit[7:5] */
+#define SPD_MOD_ATTRIB_RANK	5
+	#define SPD_MOD_ATTRIB_RANK_NUM_SHIFT	0
+	#define SPD_MOD_ATTRIB_RANK_NUM_MASK	0x07
+		#define SPD_MOD_ATTRIB_RANK_NUM_BASE	1
+		#define SPD_MOD_ATTRIB_RANK_NUM_MIN	1
+		#define SPD_MOD_ATTRIB_RANK_NUM_MAX	8
+
+#define SPD_RANK_SIZE	31	/* Only one bit is set */
+	#define SPD_RANK_SIZE_1GB	(1<<0)
+	#define SPD_RANK_SIZE_2GB	(1<<1)
+	#define SPD_RANK_SIZE_4GB	(1<<2)
+	#define SPD_RANK_SIZE_8GB	(1<<3)
+	#define SPD_RANK_SIZE_16GB	(1<<4)
+	#define SPD_RANK_SIZE_128MB	(1<<5)
+	#define SPD_RANK_SIZE_256MB	(1<<6)
+	#define SPD_RANK_SIZE_512MB	(1<<7)
+
+#define SPD_DATA_WIDTH		6	/* valid value 0, 32, 33, 36, 64, 72, 80, 128, 144, 254, 255 */
+#define SPD_PRI_WIDTH		13	/* Primary SDRAM Width, it could be 0x08 or 0x10 */
+#define SPD_ERR_WIDTH		14	/* Error Checking SDRAM Width, it could be 0x08 or 0x10 */
+
+#define SPD_CAS_LAT	18	/* SDRAM Device Attributes -- CAS Latency */
+	#define SPD_CAS_LAT_2	(1<<2)
+	#define SPD_CAS_LAT_3	(1<<3)
+	#define SPD_CAS_LAT_4	(1<<4)
+	#define SPD_CAS_LAT_5	(1<<5)
+	#define SPD_CAS_LAT_6	(1<<6)
+
+#define SPD_TRP	27  /* bit [7:2] = 1-63 ns, bit [1:0] 0.25ns+, final value ((val>>2) + (val & 3) * 0.25)ns */
+#define SPD_TRRD	28
+#define SPD_TRCD	29
+#define SPD_TRAS	30
+#define SPD_TWR	36	/* x */
+#define SPD_TWTR	37	/* x */
+#define SPD_TRTP	38	/* x */
+
+#define SPD_TRC	41	/* add byte 0x40 bit [3:1] , so final val41+ table[((val40>>1) & 0x7)]  ... table[]={0, 0.25, 0.33, 0.5, 0.75, 0, 0}*/
+#define SPD_TRFC	42	/* add byte 0x40 bit [6:4] , so final val42+ table[((val40>>4) & 0x7)] + (val40 & 1)*256*/
+
+#define SPD_TREF	12