Add CONFIG_VGA_ROM_RUN to dbm690t and pistachio, otherwise the

VGA ROM can not run. After make, run
> ./cbfs/cbfstool ./coreboot.rom add ../vga_bios.rom   pci1002,791f.rom  optionrom
to make the final image with vga bios.

The macro vga_rom_address is out-of-date when CBFS starts play its role. it also should
be eliminated from rs690/chip.h as below. But it will cause building error on other board, which I
cant make test on.

##    Index: src/southbridge/amd/rs690/chip.h
##    ===================================================================
##    --- src/southbridge/amd/rs690/chip.h	(revision 4782)
##    +++ src/southbridge/amd/rs690/chip.h	(working copy)
##    @@ -23,7 +23,6 @@
##     /* Member variables are defined in Config.lb. */
##     struct southbridge_amd_rs690_config
##     {
##    -	u32 vga_rom_address;		/* The location that the VGA rom has been appened. */
##     	u8 gpp_configuration;	/* The configuration of General Purpose Port, A/B/C/D/E. */
##     	u8 port_enable;		/* Which port is enabled? GFX(2,3), GPP(4,5,6,7) */
##     	u8 gfx_dev2_dev3;	/* for GFX Core initialization REFCLK_SEL */
##

Don't apply above patch about rs690/chip.h before every board has been fixed.

Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4783 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

3 files changed, 2 insertions, 6 deletions

diff --git a/src/mainboard/amd/dbm690t/Config.lb b/src/mainboard/amd/dbm690t/Config.lb
index 68255eee8c..98ff2dd0f7 100644
--- a/src/mainboard/amd/dbm690t/Config.lb
+++ b/src/mainboard/amd/dbm690t/Config.lb
@@ -136,7 +136,6 @@ config chip.h
 #The variables belong to mainboard are defined here.
 
 #Define gpp_configuration,	A=0, B=1, C=2, D=3, E=4(default)
-#Define vga_rom_address = 0xfff0000
 #Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7)
 #Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3,
 #					   1: the system allows a PCIE link to be established on Dev2 or Dev3.
@@ -170,7 +169,6 @@ chip northbridge/amd/amdk8/root_complex
 					device pci 6.0 on end # PCIE P2P bridge 0x7916
 					device pci 7.0 on end # PCIE P2P bridge 0x7917
 					device pci 8.0 off end # NB/SB Link P2P bridge
-					register "vga_rom_address" = "0xfff00000"
 					register "gpp_configuration" = "4"
 					register "port_enable" = "0xfc"
 					register "gfx_dev2_dev3" = "1"
diff --git a/src/mainboard/amd/dbm690t/Options.lb b/src/mainboard/amd/dbm690t/Options.lb
index 92378ebb10..d5d54f985e 100644
--- a/src/mainboard/amd/dbm690t/Options.lb
+++ b/src/mainboard/amd/dbm690t/Options.lb
@@ -73,6 +73,7 @@ uses HOSTCC
 uses CONFIG_OBJCOPY
 uses CONFIG_CONSOLE_VGA
 uses CONFIG_PCI_ROM_RUN
+uses CONFIG_VGA_ROM_RUN
 uses CONFIG_HW_MEM_HOLE_SIZEK
 uses CONFIG_HT_CHAIN_UNITID_BASE
 uses CONFIG_HT_CHAIN_END_UNITID_BASE
@@ -103,8 +104,6 @@ default CONFIG_ROM_SIZE=524288
 ##
 ## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
 ##
-#default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-#256K
 default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
 
 ##
@@ -160,6 +159,7 @@ default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
 #VGA Console
 default CONFIG_CONSOLE_VGA=1
 default CONFIG_PCI_ROM_RUN=1
+default CONFIG_VGA_ROM_RUN=1
 
 # BTDC: Only one HT device on Herring.
 #HT Unit ID offset
diff --git a/src/mainboard/amd/dbm690t/devicetree.cb b/src/mainboard/amd/dbm690t/devicetree.cb
index 870503789f..2e89c13aaf 100644
--- a/src/mainboard/amd/dbm690t/devicetree.cb
+++ b/src/mainboard/amd/dbm690t/devicetree.cb
@@ -1,5 +1,4 @@
 #Define gpp_configuration,	A=0, B=1, C=2, D=3, E=4(default)
-#Define vga_rom_address = 0xfff0000
 #Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7)
 #Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3,
 #			1: the system allows a PCIE link to be established on Dev2 or Dev3.
@@ -33,7 +32,6 @@ chip northbridge/amd/amdk8/root_complex
 					device pci 6.0 on end # PCIE P2P bridge 0x7916
 					device pci 7.0 on end # PCIE P2P bridge 0x7917
 					device pci 8.0 off end # NB/SB Link P2P bridge
-					register "vga_rom_address" = "0xfff00000"
 					register "gpp_configuration" = "4"
 					register "port_enable" = "0xfc"
 					register "gfx_dev2_dev3" = "1"