AMD Fam15tn: Split DSDT into common sections

Split the Parmer, Family 15tn, and Hudson DSDT into groups.  This splits
the DSDT table into includable ASL files which carry details specific
to the Family 15tn APU, the Parmer platform, and the Hudson FCH.  The
dsdt.asl file in the mainboard directory contains only #include
references to the appropriate files.

Initially, this split was done by moving each piece of functionality
into its own file (e.g. IRQ routing and mapping, processor tree, sleep
states and sleep methods, etc.) and those pieces were #included in
dsdt.asl to ensure an exact match (via acpidump/acpixtract/iasl -d)
with the extant version of the table.  Once the new tables were found
to exactly match the existing tables, the pieces were rearranged into
reasonable groups (e.g. fch.asl, northbridge.asl, pci_int.asl, etc.).

Some include files have no content but are left as a template for
other platforms and as placeholders for completing the ACPI
implementation for Parmer (e.g. thermal.asl, superio.asl, ide.asl,
sata.asl, etc.).

Change-Id: I098b0c5ca27629da9bc1cff1e6ba9fa6703e2710
Signed-off-by: Steve Goodrich <steve.goodrich@se-eng.com>
Reviewed-on: http://review.coreboot.org/3629
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>

12 files changed, 379 insertions, 1925 deletions

diff --git a/src/mainboard/amd/parmer/acpi/gpe.asl b/src/mainboard/amd/parmer/acpi/gpe.asl
new file mode 100755
index 0000000000..40a19d405a
--- /dev/null
+++ b/src/mainboard/amd/parmer/acpi/gpe.asl
@@ -0,0 +1,79 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+Scope(\_GPE) {	/* Start Scope GPE */
+
+	/*  General event 3  */
+	Method(_L03) {
+		/* DBGO("\\_GPE\\_L00\n") */
+		Notify(\_SB.PCI0.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+	}
+
+	/*  Legacy PM event  */
+	Method(_L08) {
+		/* DBGO("\\_GPE\\_L08\n") */
+	}
+
+	/*  Temp warning (TWarn) event  */
+	Method(_L09) {
+		/* DBGO("\\_GPE\\_L09\n") */
+		/* Notify (\_TZ.TZ00, 0x80) */
+	}
+
+	/*  USB controller PME#  */
+	Method(_L0B) {
+		/* DBGO("\\_GPE\\_L0B\n") */
+		Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PCI0.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+	}
+
+	/*  ExtEvent0 SCI event  */
+	Method(_L10) {
+		/* DBGO("\\_GPE\\_L10\n") */
+	}
+
+
+	/*  ExtEvent1 SCI event  */
+	Method(_L11) {
+		/* DBGO("\\_GPE\\_L11\n") */
+	}
+
+	/*  GPIO0 or GEvent8 event  */
+	Method(_L18) {
+		/* DBGO("\\_GPE\\_L18\n") */
+		Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PCI0.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+	}
+
+	/*  Azalia SCI event  */
+	Method(_L1B) {
+		/* DBGO("\\_GPE\\_L1B\n") */
+		Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PCI0.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+	}
+} 	/* End Scope GPE */
diff --git a/src/mainboard/amd/parmer/acpi/ide.asl b/src/mainboard/amd/parmer/acpi/ide.asl
index 1ff2e799a5..be4d9bb1d3 100644..100755
--- a/src/mainboard/amd/parmer/acpi/ide.asl
+++ b/src/mainboard/amd/parmer/acpi/ide.asl
@@ -1,7 +1,7 @@
 /*
  * This file is part of the coreboot project.
  *
- * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -17,228 +17,4 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
  */
 
-/*
-Scope (_SB) {
-	Device(PCI0) {
-		Device(IDEC) {
-			Name(_ADR, 0x00140001)
-			#include "ide.asl"
-		}
-	}
-}
-*/
-
-/* Some timing tables */
-Name(UDTT, Package(){ /* Udma timing table */
-	120, 90, 60, 45, 30, 20, 15, 0	/* UDMA modes 0 -> 6 */
-})
-
-Name(MDTT, Package(){ /* MWDma timing table */
-	480, 150, 120, 0	/* Legacy DMA modes 0 -> 2 */
-})
-
-Name(POTT, Package(){ /* Pio timing table */
-	600, 390, 270, 180, 120, 0	/* PIO modes 0 -> 4 */
-})
-
-/* Some timing register value tables */
-Name(MDRT, Package(){ /* MWDma timing register table */
-	0x77, 0x21, 0x20, 0xFF	/* Legacy DMA modes 0 -> 2 */
-})
-
-Name(PORT, Package(){
-	0x99, 0x47, 0x34, 0x22, 0x20, 0x99	/* PIO modes 0 -> 4 */
-})
-
-OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */
-	Field(ICRG, AnyAcc, NoLock, Preserve)
-{
-	PPTS, 8,	/* Primary PIO Slave Timing */
-	PPTM, 8,	/* Primary PIO Master Timing */
-	OFFSET(0x04), PMTS, 8,	/* Primary MWDMA Slave Timing */
-	PMTM, 8,	/* Primary MWDMA Master Timing */
-	OFFSET(0x08), PPCR, 8,	/* Primary PIO Control */
-	OFFSET(0x0A), PPMM, 4,	/* Primary PIO master Mode */
-	PPSM, 4,	/* Primary PIO slave Mode */
-	OFFSET(0x14), PDCR, 2,	/* Primary UDMA Control */
-	OFFSET(0x16), PDMM, 4,	/* Primary UltraDMA Mode */
-	PDSM, 4,	/* Primary UltraDMA Mode */
-}
-
-Method(GTTM, 1) /* get total time*/
-{
-	Store(And(Arg0, 0x0F), Local0)	/* Recovery Width */
-	Increment(Local0)
-	Store(ShiftRight(Arg0, 4), Local1)	/* Command Width */
-	Increment(Local1)
-	Return(Multiply(30, Add(Local0, Local1)))
-}
-
-Device(PRID)
-{
-	Name (_ADR, Zero)
-	Method(_GTM, 0)
-	{
-		NAME(OTBF, Buffer(20) { /* out buffer */
-			0xFF, 0xFF, 0xFF, 0xFF,
-			0xFF, 0xFF, 0xFF, 0xFF,
-			0xFF, 0xFF, 0xFF, 0xFF,
-			0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00
-		})
-
-		CreateDwordField(OTBF, 0, PSD0)   /* PIO spd0 */
-		CreateDwordField(OTBF, 4, DSD0)   /* DMA spd0 */
-		CreateDwordField(OTBF, 8, PSD1)   /* PIO spd1 */
-		CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */
-		CreateDwordField(OTBF, 16, BFFG) /* buffer flags */
-
-		/* Just return if the channel is disabled */
-		If(And(PPCR, 0x01)) { /* primary PIO control */
-			Return(OTBF)
-		}
-
-		/* Always tell them independent timing available and IOChannelReady used on both drives */
-		Or(BFFG, 0x1A, BFFG)
-
-		Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming  to PIO spd0 */
-		Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing  to PIO spd1 */
-
-		If(And(PDCR, 0x01)) {	/* It's under UDMA mode */
-			Or(BFFG, 0x01, BFFG)
-			Store(DerefOf(Index(UDTT, PDMM)), DSD0)
-		}
-		Else {
-			Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing,  DmaSpd0 */
-		}
-
-		If(And(PDCR, 0x02)) {	/* It's under UDMA mode */
-			Or(BFFG, 0x04, BFFG)
-			Store(DerefOf(Index(UDTT, PDSM)), DSD1)
-		}
-		Else {
-			Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing,  DmaSpd0 */
-		}
-
-		Return(OTBF) /* out buffer */
-	}				/* End Method(_GTM) */
-
-	Method(_STM, 3, NotSerialized)
-	{
-		NAME(INBF, Buffer(20) { /* in buffer */
-			0xFF, 0xFF, 0xFF, 0xFF,
-			0xFF, 0xFF, 0xFF, 0xFF,
-			0xFF, 0xFF, 0xFF, 0xFF,
-			0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00
-		})
-
-		CreateDwordField(INBF, 0, PSD0)    /* PIO spd0 */
-		CreateDwordField(INBF, 4, DSD0)   /* PIO spd0 */
-		CreateDwordField(INBF, 8, PSD1)   /* PIO spd1 */
-		CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */
-		CreateDwordField(INBF, 16, BFFG) /*buffer flag */
-
-		Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0)
-		Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */
-		Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1)
-		Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */
-
-		Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */
-		Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */
-
-		If(And(BFFG, 0x01)) {	/* Drive 0 is under UDMA mode */
-			Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0)
-			Divide(Local0, 7, PDMM,)
-			Or(PDCR, 0x01, PDCR)
-		}
-		Else {
-			If(LNotEqual(DSD0, 0xFFFFFFFF)) {
-				Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0)
-				Store(DerefOf(Index(MDRT, Local0)), PMTM)
-			}
-		}
-
-		If(And(BFFG, 0x04)) {	/* Drive 1 is under UDMA mode */
-			Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0)
-			Divide(Local0, 7, PDSM,)
-			Or(PDCR, 0x02, PDCR)
-		}
-		Else {
-			If(LNotEqual(DSD1, 0xFFFFFFFF)) {
-				Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0)
-				Store(DerefOf(Index(MDRT, Local0)), PMTS)
-			}
-		}
-		/* Return(INBF) */
-	}		/*End Method(_STM) */
-	Device(MST)
-	{
-		Name(_ADR, 0)
-		Method(_GTF) {
-			Name(CMBF, Buffer(21) {
-				0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
-				0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
-				0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5
-			})
-			CreateByteField(CMBF, 1, POMD)
-			CreateByteField(CMBF, 8, DMMD)
-			CreateByteField(CMBF, 5, CMDA)
-			CreateByteField(CMBF, 12, CMDB)
-			CreateByteField(CMBF, 19, CMDC)
-
-			Store(0xA0, CMDA)
-			Store(0xA0, CMDB)
-			Store(0xA0, CMDC)
-
-			Or(PPMM, 0x08, POMD)
-
-			If(And(PDCR, 0x01)) {
-				Or(PDMM, 0x40, DMMD)
-			}
-			Else {
-				Store(Match
-				      (MDTT, MLE, GTTM(PMTM),
-				       MTR, 0, 0), Local0)
-				If(LLess(Local0, 3)) {
-					Or(0x20, Local0, DMMD)
-				}
-			}
-			Return(CMBF)
-		}
-	}		/* End Device(MST) */
-
-	Device(SLAV)
-	{
-		Name(_ADR, 1)
-		Method(_GTF) {
-			Name(CMBF, Buffer(21) {
-				0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
-				0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
-				0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5
-			})
-			CreateByteField(CMBF, 1, POMD)
-			CreateByteField(CMBF, 8, DMMD)
-			CreateByteField(CMBF, 5, CMDA)
-			CreateByteField(CMBF, 12, CMDB)
-			CreateByteField(CMBF, 19, CMDC)
-
-			Store(0xB0, CMDA)
-			Store(0xB0, CMDB)
-			Store(0xB0, CMDC)
-
-			Or(PPSM, 0x08, POMD)
-
-			If(And(PDCR, 0x02)) {
-				Or(PDSM, 0x40, DMMD)
-			}
-			Else {
-				Store(Match
-				      (MDTT, MLE, GTTM(PMTS),
-				       MTR, 0, 0), Local0)
-				If(LLess(Local0, 3)) {
-					Or(0x20, Local0, DMMD)
-				}
-			}
-			Return(CMBF)
-		}
-	}			/* End Device(SLAV) */
-}
+/* No IDE functionality */
diff --git a/src/mainboard/amd/parmer/acpi/mainboard.asl b/src/mainboard/amd/parmer/acpi/mainboard.asl
new file mode 100755
index 0000000000..040f0694fe
--- /dev/null
+++ b/src/mainboard/amd/parmer/acpi/mainboard.asl
@@ -0,0 +1,43 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+	/* Data to be patched by the BIOS during POST */
+	/* FIXME the patching is not done yet! */
+	/* Memory related values */
+	Name(LOMH, 0x0)	/* Start of unused memory in C0000-E0000 range */
+	Name(PBAD, 0x0)	/* Address of BIOS area (If TOM2 != 0, Addr >> 16) */
+	Name(PBLN, 0x0)	/* Length of BIOS area */
+
+	Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS)	/* Base address of PCIe config space */
+	Name(PCLN, Multiply(0x100000, CONFIG_MMCONF_BUS_NUMBER)) /* Length of PCIe config space, 1MB each bus */
+	Name(HPBA, 0xFED00000)	/* Base address of HPET table */
+
+	Name(SSFG, 0x0D)		/* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */
+
+	/* Some global data */
+	Name(OSTP, 3)   /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */
+	Name(OSV, Ones) /* Assume nothing */
+	Name(PMOD, One) /* Assume APIC */
+
+	/* AcpiGpe0Blk */
+	OperationRegion(GP0B, SystemMemory, 0xfed80814, 0x04)
+		Field(GP0B, ByteAcc, NoLock, Preserve) {
+		, 11,
+		USBS, 1,
+	}
diff --git a/src/mainboard/amd/parmer/acpi/routing.asl b/src/mainboard/amd/parmer/acpi/routing.asl
index 1b37c767f2..108e204a8c 100644
--- a/src/mainboard/amd/parmer/acpi/routing.asl
+++ b/src/mainboard/amd/parmer/acpi/routing.asl
@@ -2,6 +2,7 @@
  * This file is part of the coreboot project.
  *
  * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -17,16 +18,7 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
  */
 
-/*
-DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001
-		)
-	{
-		#include "routing.asl"
-	}
-*/
-
-/* Routing is in System Bus scope */
-Scope(\_SB) {
+	/* Routing is in System Bus scope */
 	Name(PR0, Package(){
 		/* NB devices */
 		/* Bus 0, Dev 0 - F15 Host Controller */
@@ -70,17 +62,17 @@ Scope(\_SB) {
 		Package(){0x0007FFFF, 2, INTB, 0 },
 		Package(){0x0007FFFF, 3, INTC, 0 },
 
-		/* Bus 0, Funct 8 - Southbridge port (normally hidden) */
+		/* Bus 0, Dev 8 - Southbridge port (normally hidden) */
 
-		/* SB devices */
 		/* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */
 		Package(){0x0014FFFF, 0, INTA, 0 },
 		Package(){0x0014FFFF, 1, INTB, 0 },
 		Package(){0x0014FFFF, 2, INTC, 0 },
 		Package(){0x0014FFFF, 3, INTD, 0 },
 
-		/* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5;
-		 * EHCI, dev 18, 19 func 2 */
+		/* SB devices */
+		/* Bus 0, Dev 18,19,22 - USB: OHCI @ func 0
+		 *                            EHCI @ func 2 */
 		Package(){0x0012FFFF, 0, INTC, 0 },
 		Package(){0x0012FFFF, 1, INTB, 0 },
 
@@ -90,7 +82,7 @@ Scope(\_SB) {
 		Package(){0x0016FFFF, 0, INTC, 0 },
 		Package(){0x0016FFFF, 1, INTB, 0 },
 
-		/* Bus 0, Dev 10 - USB: XHCI func 0, 1 */
+		/* Bus 0, Dev 16 - USB: XHCI func 0, 1 */
 		Package(){0x0010FFFF, 0, INTC, 0 },
 		Package(){0x0010FFFF, 1, INTB, 0 },
 
@@ -148,17 +140,17 @@ Scope(\_SB) {
 		Package(){0x0007FFFF, 2, 0, 17 },
 		Package(){0x0007FFFF, 3, 0, 18 },
 
-		/* Bus 0, Funct 8 - Southbridge port (normally hidden) */
+		/* Bus 0, Dev 8 - Southbridge port (normally hidden) */
 
-		/* SB devices in APIC mode */
 		/* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */
 		Package(){0x0014FFFF, 0, 0, 16 },
 		Package(){0x0014FFFF, 1, 0, 17 },
 		Package(){0x0014FFFF, 2, 0, 18 },
 		Package(){0x0014FFFF, 3, 0, 19 },
 
-		/* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5;
-		 * EHCI, dev 18, 19 func 2 */
+		/* SB devices in APIC mode */
+		/* Bus 0, Dev 18,19,22 - USB: OHCI @ func 0
+		 *                            EHCI @ func 2 */
 		Package(){0x0012FFFF, 0, 0, 18 },
 		Package(){0x0012FFFF, 1, 0, 17 },
 
@@ -168,7 +160,7 @@ Scope(\_SB) {
 		Package(){0x0016FFFF, 0, 0, 18 },
 		Package(){0x0016FFFF, 1, 0, 17 },
 
-		/* Bus 0, Dev 10 - USB: XHCI func 0, 1 */
+		/* Bus 0, Dev 16 - USB: XHCI func 0, 1 */
 		Package(){0x0010FFFF, 0, 0, 0x12},
 		Package(){0x0010FFFF, 1, 0, 0x11},
 
@@ -197,23 +189,6 @@ Scope(\_SB) {
 		Package(){0x0000FFFF, 3, 0, 17 },
 	})
 
-#if 0 //parmer not use
-	Name(PS3, Package(){
-		/* The external GFX - Hooked to PCIe slot 3 */
-		Package(){0x0000FFFF, 0, INTD, 0 },
-		Package(){0x0000FFFF, 1, INTA, 0 },
-		Package(){0x0000FFFF, 2, INTB, 0 },
-		Package(){0x0000FFFF, 3, INTC, 0 },
-	})
-	Name(APS3, Package(){
-		/* The external GFX - Hooked to PCIe slot 3 */
-		Package(){0x0000FFFF, 0, 0, 19 },
-		Package(){0x0000FFFF, 1, 0, 16 },
-		Package(){0x0000FFFF, 2, 0, 17 },
-		Package(){0x0000FFFF, 3, 0, 18 },
-	})
-#endif
-
 	Name(PS4, Package(){
 		/* PCIe slot - Hooked to PCIe slot 4 */
 		Package(){0x0000FFFF, 0, INTA, 0 },
@@ -346,11 +321,4 @@ Scope(\_SB) {
 		Package(){0x0006FFFF, 1, 0, 0x16 },
 		Package(){0x0006FFFF, 2, 0, 0x17 },
 		Package(){0x0006FFFF, 3, 0, 0x14 },
-/*
-		Package(){0x0007FFFF, 0, 0, 0x16 },
-		Package(){0x0007FFFF, 1, 0, 0x17 },
-		Package(){0x0007FFFF, 2, 0, 0x14 },
-		Package(){0x0007FFFF, 3, 0, 0x15 },
-*/
 	})
-}
diff --git a/src/mainboard/amd/parmer/acpi/sata.asl b/src/mainboard/amd/parmer/acpi/sata.asl
index c817b6efe3..5ad3e47054 100644..100755
--- a/src/mainboard/amd/parmer/acpi/sata.asl
+++ b/src/mainboard/amd/parmer/acpi/sata.asl
@@ -1,7 +1,7 @@
 /*
  * This file is part of the coreboot project.
  *
- * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -17,132 +17,4 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
  */
 
-/* simple name description */
-
-/*
-Scope (_SB) {
-	Device(PCI0) {
-		Device(SATA) {
-			Name(_ADR, 0x00110000)
-			#include "sata.asl"
-		}
-	}
-}
-*/
-
-Name(STTM, Buffer(20) {
-	0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00,
-	0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00,
-	0x1f, 0x00, 0x00, 0x00
-})
-
-/* Start by clearing the PhyRdyChg bits */
-Method(_INI) {
-	\_GPE._L1F()
-}
-
-Device(PMRY)
-{
-	Name(_ADR, 0)
-	Method(_GTM, 0x0, NotSerialized) {
-		Return(STTM)
-	}
-	Method(_STM, 0x3, NotSerialized) {}
-
-	Device(PMST) {
-		Name(_ADR, 0)
-		Method(_STA,0) {
-			if (LGreater(P0IS,0)) {
-				return (0x0F) /* sata is visible */
-			}
-			else {
-				return  (0x00) /* sata is missing */
-			}
-		}
-	}/* end of PMST */
-
-	Device(PSLA)
-	{
-		Name(_ADR, 1)
-		Method(_STA,0) {
-			if (LGreater(P1IS,0)) {
-				return (0x0F) /* sata is visible */
-			}
-			else {
-				return (0x00) /* sata is missing */
-			}
-		}
-	}	/* end of PSLA */
-}   /* end of PMRY */
-
-Device(SEDY)
-{
-	Name(_ADR, 1)		/* IDE Scondary Channel */
-	Method(_GTM, 0x0, NotSerialized) {
-		Return(STTM)
-	}
-	Method(_STM, 0x3, NotSerialized) {}
-
-	Device(SMST)
-	{
-		Name(_ADR, 0)
-		Method(_STA,0) {
-			if (LGreater(P2IS,0)) {
-				return (0x0F) /* sata is visible */
-			}
-			else {
-				return (0x00) /* sata is missing */
-			}
-		}
-	} /* end of SMST */
-
-	Device(SSLA)
-	{
-		Name(_ADR, 1)
-		Method(_STA,0) {
-			if (LGreater(P3IS,0)) {
-				return (0x0F) /* sata is visible */
-			}
-			else {
-				return (0x00) /* sata is missing */
-			}
-		}
-	} /* end of SSLA */
-}   /* end of SEDY */
-
-/* SATA Hot Plug Support */
-Scope(\_GPE) {
-	Method(_L1F,0x0,NotSerialized) {
-		if (\_SB.P0PR) {
-			if (LGreater(\_SB.P0IS,0)) {
-				sleep(32)
-			}
-			Notify(\_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */
-			store(one, \_SB.P0PR)
-		}
-
-		if (\_SB.P1PR) {
-			if (LGreater(\_SB.P1IS,0)) {
-				sleep(32)
-			}
-			Notify(\_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
-			store(one, \_SB.P1PR)
-		}
-
-		if (\_SB.P2PR) {
-			if (LGreater(\_SB.P2IS,0)) {
-				sleep(32)
-			}
-			Notify(\_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */
-			store(one, \_SB.P2PR)
-		}
-
-		if (\_SB.P3PR) {
-			if (LGreater(\_SB.P3IS,0)) {
-				sleep(32)
-			}
-			Notify(\_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
-			store(one, \_SB.P3PR)
-		}
-	}
-}
+/* No SATA functionality */
diff --git a/src/mainboard/amd/parmer/acpi/si.asl b/src/mainboard/amd/parmer/acpi/si.asl
new file mode 100755
index 0000000000..1fb5254100
--- /dev/null
+++ b/src/mainboard/amd/parmer/acpi/si.asl
@@ -0,0 +1,28 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+	Scope(\_SI) {
+		Method(_SST, 1) {
+			/* DBGO("\\_SI\\_SST\n") */
+			/* DBGO("   New Indicator state: ") */
+			/* DBGO(Arg0) */
+			/* DBGO("\n") */
+		}
+	} /* End Scope SI */
+
+
diff --git a/src/mainboard/amd/parmer/acpi/sleep.asl b/src/mainboard/amd/parmer/acpi/sleep.asl
new file mode 100755
index 0000000000..09b14bd23f
--- /dev/null
+++ b/src/mainboard/amd/parmer/acpi/sleep.asl
@@ -0,0 +1,103 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* Wake status package */
+Name(WKST,Package(){Zero, Zero})
+
+/*
+* \_PTS - Prepare to Sleep method
+*
+*	Entry:
+*		Arg0=The value of the sleeping state S1=1, S2=2, etc
+*
+* Exit:
+*		-none-
+*
+* The _PTS control method is executed at the beginning of the sleep process
+* for S1-S5. The sleeping value is passed to the _PTS control method.	This
+* control method may be executed a relatively long time before entering the
+* sleep state and the OS may abort	the operation without notification to
+* the ACPI driver.  This method cannot modify the configuration or power
+* state of any device in the system.
+*/
+Method(\_PTS, 1) {
+	/* DBGO("\\_PTS\n") */
+	/* DBGO("From S0 to S") */
+	/* DBGO(Arg0) */
+	/* DBGO("\n") */
+
+	/* Clear sleep SMI status flag and enable sleep SMI trap. */
+	/*Store(One, CSSM)
+	Store(One, SSEN)*/
+
+	/* On older chips, clear PciExpWakeDisEn */
+	/*if (LLessEqual(\_SB.SBRI, 0x13)) {
+	*    	Store(0,\_SB.PWDE)
+	*}
+	*/
+
+	/* Clear wake status structure. */
+	Store(0, Index(WKST,0))
+	Store(0, Index(WKST,1))
+
+	Store (0x07, UPWS)
+} /* End Method(\_PTS) */
+
+/*
+*	\_BFS OEM Back From Sleep method
+*
+*	Entry:
+*		Arg0=The value of the sleeping state S1=1, S2=2
+*
+*	Exit:
+*		-none-
+*/
+Method(\_BFS, 1) {
+	/* DBGO("\\_BFS\n") */
+	/* DBGO("From S") */
+	/* DBGO(Arg0) */
+	/* DBGO(" to S0\n") */
+}
+
+/*
+*  \_WAK System Wake method
+*
+*	Entry:
+*		Arg0=The value of the sleeping state S1=1, S2=2
+*
+*	Exit:
+*		Return package of 2 DWords
+*		Dword 1 - Status
+*			0x00000000	wake succeeded
+*			0x00000001	Wake was signaled but failed due to lack of power
+*			0x00000002	Wake was signaled but failed due to thermal condition
+*		Dword 2 - Power Supply state
+*			if non-zero the effective S-state the power supply entered
+*/
+Method(\_WAK, 1) {
+	/* DBGO("\\_WAK\n") */
+	/* DBGO("From S") */
+	/* DBGO(Arg0) */
+	/* DBGO(" to S0\n") */
+
+	/* Re-enable HPET */
+	Store(1,USBS)
+
+	Return(WKST)
+} /* End Method(\_WAK) */
diff --git a/src/mainboard/amd/parmer/acpi/superio.asl b/src/mainboard/amd/parmer/acpi/superio.asl
new file mode 100755
index 0000000000..ec72e36fc7
--- /dev/null
+++ b/src/mainboard/amd/parmer/acpi/superio.asl
@@ -0,0 +1,20 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* No Super I/O device or functionality yet */
diff --git a/src/mainboard/amd/parmer/acpi/thermal.asl b/src/mainboard/amd/parmer/acpi/thermal.asl
new file mode 100755
index 0000000000..0466a1ba47
--- /dev/null
+++ b/src/mainboard/amd/parmer/acpi/thermal.asl
@@ -0,0 +1,20 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* No thermal zone functionality */
diff --git a/src/mainboard/amd/parmer/acpi/usb.asl b/src/mainboard/amd/parmer/acpi/usb.asl
deleted file mode 100644
index 857c78f569..0000000000
--- a/src/mainboard/amd/parmer/acpi/usb.asl
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2012 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-/* simple name description */
-/*
-DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001
-		)
-	{
-		#include "usb.asl"
-	}
-*/
-Method(UCOC, 0) {
-	Sleep(20)
-	Store(0x13,CMTI)
-	Store(0,GPSL)
-}
-
-/* USB Port 0 overcurrent uses Gpm 0 */
-If(LLessEqual(UOM0,9)) {
-	Scope (\_GPE) {
-		Method (_L13) {
-		}
-	}
-}
-
-/* USB Port 1 overcurrent uses Gpm 1 */
-If (LLessEqual(UOM1,9)) {
-	Scope (\_GPE) {
-		Method (_L14) {
-		}
-	}
-}
-
-/* USB Port 2 overcurrent uses Gpm 2 */
-If (LLessEqual(UOM2,9)) {
-	Scope (\_GPE) {
-		Method (_L15) {
-		}
-	}
-}
-
-/* USB Port 3 overcurrent uses Gpm 3 */
-If (LLessEqual(UOM3,9)) {
-	Scope (\_GPE) {
-		Method (_L16) {
-		}
-	}
-}
-
-/* USB Port 4 overcurrent uses Gpm 4 */
-If (LLessEqual(UOM4,9)) {
-	Scope (\_GPE) {
-		Method (_L19) {
-		}
-	}
-}
-
-/* USB Port 5 overcurrent uses Gpm 5 */
-If (LLessEqual(UOM5,9)) {
-	Scope (\_GPE) {
-		Method (_L1A) {
-		}
-	}
-}
-
-/* USB Port 6 overcurrent uses Gpm 6 */
-If (LLessEqual(UOM6,9)) {
-	Scope (\_GPE) {
-		/* Method (_L1C) { */
-		Method (_L06) {
-		}
-	}
-}
-
-/* USB Port 7 overcurrent uses Gpm 7 */
-If (LLessEqual(UOM7,9)) {
-	Scope (\_GPE) {
-		/* Method (_L1D) { */
-		Method (_L07) {
-		}
-	}
-}
-
-/* USB Port 8 overcurrent uses Gpm 8 */
-If (LLessEqual(UOM8,9)) {
-	Scope (\_GPE) {
-		Method (_L17) {
-		}
-	}
-}
-
-/* USB Port 9 overcurrent uses Gpm 9 */
-If (LLessEqual(UOM9,9)) {
-	Scope (\_GPE) {
-		Method (_L0E) {
-		}
-	}
-}
diff --git a/src/mainboard/amd/parmer/acpi/usb_oc.asl b/src/mainboard/amd/parmer/acpi/usb_oc.asl
new file mode 100755
index 0000000000..1e63d975ca
--- /dev/null
+++ b/src/mainboard/amd/parmer/acpi/usb_oc.asl
@@ -0,0 +1,31 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* USB overcurrent mapping pins.   */
+Name(UOM0, 0)
+Name(UOM1, 2)
+Name(UOM2, 0)
+Name(UOM3, 7)
+Name(UOM4, 2)
+Name(UOM5, 2)
+Name(UOM6, 6)
+Name(UOM7, 2)
+Name(UOM8, 6)
+Name(UOM9, 6)
diff --git a/src/mainboard/amd/parmer/dsdt.asl b/src/mainboard/amd/parmer/dsdt.asl
index e36965efae..ef2ae6f8e6 100644
--- a/src/mainboard/amd/parmer/dsdt.asl
+++ b/src/mainboard/amd/parmer/dsdt.asl
@@ -2,6 +2,7 @@
  * This file is part of the coreboot project.
  *
  * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -19,1439 +20,66 @@
 
 /* DefinitionBlock Statement */
 DefinitionBlock (
-	"DSDT.AML",           /* Output filename */
-	"DSDT",                 /* Signature */
-	0x02,		/* DSDT Revision, needs to be 2 for 64bit */
-	"AMD   ",               /* OEMID */
-	"COREBOOT",	     /* TABLE ID */
-	0x00010001	/* OEM Revision */
+	"DSDT.AML",		/* Output filename */
+	"DSDT",			/* Signature */
+	0x02,			/* DSDT Revision, needs to be 2 for 64bit */
+	"AMD   ",		/* OEMID */
+	"COREBOOT",		/* TABLE ID */
+	0x00010001		/* OEM Revision */
 	)
 {	/* Start of ASL file */
-	/* #include "../../../arch/x86/acpi/debug.asl" */		/* Include global debug methods if needed */
+	/* #include <arch/x86/acpi/debug.asl> */	/* Include global debug methods if needed */
 
-	/* Data to be patched by the BIOS during POST */
-	/* FIXME the patching is not done yet! */
-	/* Memory related values */
-	Name(LOMH, 0x0)	/* Start of unused memory in C0000-E0000 range */
-	Name(PBAD, 0x0)	/* Address of BIOS area (If TOM2 != 0, Addr >> 16) */
-	Name(PBLN, 0x0)	/* Length of BIOS area */
+	/* Globals for the platform */
+	#include "acpi/mainboard.asl"
 
-	Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS)	/* Base address of PCIe config space */
-	Name(PCLN, Multiply(0x100000, CONFIG_MMCONF_BUS_NUMBER)) /* Length of PCIe config space, 1MB each bus */
-	Name(HPBA, 0xFED00000)	/* Base address of HPET table */
+	/* Describe the USB Overcurrent pins */
+	#include "acpi/usb_oc.asl"
 
-	Name(SSFG, 0x0D)		/* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */
+	/* PCI IRQ mapping for the Southbridge */
+	#include <southbridge/amd/agesa/hudson/acpi/pcie.asl>
 
-	/* USB overcurrent mapping pins.   */
-	Name(UOM0, 0)
-	Name(UOM1, 2)
-	Name(UOM2, 0)
-	Name(UOM3, 7)
-	Name(UOM4, 2)
-	Name(UOM5, 2)
-	Name(UOM6, 6)
-	Name(UOM7, 2)
-	Name(UOM8, 6)
-	Name(UOM9, 6)
+	/* Describe the processor tree (\_PR) */
+	#include <cpu/amd/agesa/family15tn/acpi/cpu.asl>
 
-	/* Some global data */
-	Name(OSTP, 3)		/* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */
-	Name(OSV, Ones)	/* Assume nothing */
-	Name(PMOD, One)	/* Assume APIC */
+	/* Describe the supported Sleep States for this Southbridge */
+	#include <southbridge/amd/agesa/hudson/acpi/sleepstates.asl>
 
-	/*
-	 * Processor Object
-	 *
-	 */
-	Scope (\_PR) {		/* define processor scope */
-		Processor(
-			P000,		/* name space name */
-			0,		/* Unique number for this processor */
-			0x810,		/* PBLK system I/O address !hardcoded! */
-			0x06		/* PBLKLEN for boot processor */
-			) {
-		}
-
-		Processor(
-			P001,		/* name space name */
-			1,		/* Unique number for this processor */
-			0x0810,		/* PBLK system I/O address !hardcoded! */
-			0x06		/* PBLKLEN for boot processor */
-			) {
-		}
-		Processor(
-			P002,		/* name space name */
-			2,		/* Unique number for this processor */
-			0x0810,		/* PBLK system I/O address !hardcoded! */
-			0x06		/* PBLKLEN for boot processor */
-			) {
-		}
-		Processor(
-			P003,		/* name space name */
-			3,		/* Unique number for this processor */
-			0x0810,		/* PBLK system I/O address !hardcoded! */
-			0x06		/* PBLKLEN for boot processor */
-			) {
-		}
-		Processor(
-			P004,		/* name space name */
-			4,		/* Unique number for this processor */
-			0x0810,		/* PBLK system I/O address !hardcoded! */
-			0x06		/* PBLKLEN for boot processor */
-			) {
-		}
-		Processor(
-			P005,		/* name space name */
-			5,		/* Unique number for this processor */
-			0x0810,		/* PBLK system I/O address !hardcoded! */
-			0x06		/* PBLKLEN for boot processor */
-			) {
-		}
-		Processor(
-			P006,		/* name space name */
-			6,		/* Unique number for this processor */
-			0x0810,		/* PBLK system I/O address !hardcoded! */
-			0x06		/* PBLKLEN for boot processor */
-			) {
-		}
-		Processor(
-			P007,		/* name space name */
-			7,		/* Unique number for this processor */
-			0x0810,		/* PBLK system I/O address !hardcoded! */
-			0x06		/* PBLKLEN for boot processor */
-			) {
-		}
-	} /* End _PR scope */
-
-	/* PIC IRQ mapping registers, C00h-C01h. */
-	OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002)
-		Field(PRQM, ByteAcc, NoLock, Preserve) {
-		PRQI, 0x00000008,
-		PRQD, 0x00000008,  /* Offset: 1h */
-	}
-	IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) {
-		PIRA, 0x00000008,	/* Index 0 */
-		PIRB, 0x00000008,	/* Index 1 */
-		PIRC, 0x00000008,	/* Index 2 */
-		PIRD, 0x00000008,	/* Index 3 */
-		PIRE, 0x00000008,	/* Index 4 */
-		PIRF, 0x00000008,	/* Index 5 */
-		PIRG, 0x00000008,	/* Index 6 */
-		PIRH, 0x00000008,	/* Index 7 */
-	}
-
-	/* PCI Error control register */
-	OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001)
-		Field(PERC, ByteAcc, NoLock, Preserve) {
-		SENS, 0x00000001,
-		PENS, 0x00000001,
-		SENE, 0x00000001,
-		PENE, 0x00000001,
-	}
-
-	/* Client Management index/data registers */
-	OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002)
-		Field(CMT, ByteAcc, NoLock, Preserve) {
-		CMTI,      8,
-		/* Client Management Data register */
-		G64E,   1,
-		G64O,      1,
-		G32O,      2,
-		,       2,
-		GPSL,     2,
-	}
-
-	/* GPM Port register */
-	OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001)
-		Field(GPT, ByteAcc, NoLock, Preserve) {
-		GPB0,1,
-		GPB1,1,
-		GPB2,1,
-		GPB3,1,
-		GPB4,1,
-		GPB5,1,
-		GPB6,1,
-		GPB7,1,
-	}
-
-	/* Flash ROM program enable register */
-	OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001)
-		Field(FRE, ByteAcc, NoLock, Preserve) {
-		,     0x00000006,
-		FLRE, 0x00000001,
-	}
-
-	/* PM2 index/data registers */
-	OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002)
-		Field(PM2R, ByteAcc, NoLock, Preserve) {
-		PM2I, 0x00000008,
-		PM2D, 0x00000008,
-	}
-
-	/* Power Management I/O registers. */
-	OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002)
-		Field(PIOR, ByteAcc, NoLock, Preserve) {
-		PIOI, 0x00000008,
-		PIOD, 0x00000008,
-	}
-	IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) {
-		Offset(0xEE),
-		UPWS, 3,
-	}
-
-	/* PM1 Event Block
-	* First word is PM1_Status, Second word is PM1_Enable
-	*/
-
-	/* AcpiGpe0Blk */
-	OperationRegion(GP0B, SystemMemory, 0xfed80814, 0x04)
-		Field(GP0B, ByteAcc, NoLock, Preserve) {
-		, 11,
-		USBS, 1,
-	}
+	/* Describe the Sleep Methods (WAK, PTS, GTS, etc.) for this platform */
+	#include "acpi/sleep.asl"
 
 	Scope(\_SB) {
-		/* PCIe Configuration Space for CONFIG_MMCONF_BUS_NUMBER busses */
-		OperationRegion(PCFG, SystemMemory, PCBA, PCLN)
-			Field(PCFG, ByteAcc, NoLock, Preserve) {
-			/* Byte offsets are computed using the following technique:
-			 * ((bus number + 1) * ((device number * 8) * 4096)) + register offset
-			 * The 8 comes from 8 functions per device, and 4096 bytes per function config space
-			*/
-			Offset(0x00088024),	/* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */
-			STB5, 32,
-			Offset(0x00098042),	/* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */
-			PT0D, 1,
-			PT1D, 1,
-			PT2D, 1,
-			PT3D, 1,
-			PT4D, 1,
-			PT5D, 1,
-			PT6D, 1,
-			PT7D, 1,
-			PT8D, 1,
-			PT9D, 1,
-			Offset(0x000A0004),	/* Byte offset to SMBUS	register 4h - Bus 0, Device 20, Function 0 */
-			SBIE, 1,
-			SBME, 1,
-			Offset(0x000A0008),	/* Byte offset to SMBUS	register 8h - Bus 0, Device 20, Function 0 */
-			SBRI, 8,
-			Offset(0x000A0014),	/* Byte offset to SMBUS	register 14h - Bus 0, Device 20, Function 0 */
-			SBB1, 32,
-			Offset(0x000A0078),	/* Byte offset to SMBUS	register 78h - Bus 0, Device 20, Function 0 */
-			,14,
-			P92E, 1,		/* Port92 decode enable */
-		}
+		/* global utility methods expected within the \_SB scope */
+		#include <arch/x86/acpi/globutil.asl>
 
-		OperationRegion(SB5, SystemMemory, STB5, 0x1000)
-			Field(SB5, AnyAcc, NoLock, Preserve){
-			/* Port 0 */
-			Offset(0x120),		/* Port 0 Task file status */
-			P0ER, 1,
-			, 2,
-			P0DQ, 1,
-			, 3,
-			P0BY, 1,
-			Offset(0x128),		/* Port 0 Serial ATA status */
-			P0DD, 4,
-			, 4,
-			P0IS, 4,
-			Offset(0x12C),		/* Port 0 Serial ATA control */
-			P0DI, 4,
-			Offset(0x130),		/* Port 0 Serial ATA error */
-			, 16,
-			P0PR, 1,
+		/* Describe IRQ Routing mapping for this platform (within the \_SB scope) */
+		#include "acpi/routing.asl"
 
-			/* Port 1 */
-			offset(0x1A0),		/* Port 1 Task file status */
-			P1ER, 1,
-			, 2,
-			P1DQ, 1,
-			, 3,
-			P1BY, 1,
-			Offset(0x1A8),		/* Port 1 Serial ATA status */
-			P1DD, 4,
-			, 4,
-			P1IS, 4,
-			Offset(0x1AC),		/* Port 1 Serial ATA control */
-			P1DI, 4,
-			Offset(0x1B0),		/* Port 1 Serial ATA error */
-			, 16,
-			P1PR, 1,
-
-			/* Port 2 */
-			Offset(0x220),		/* Port 2 Task file status */
-			P2ER, 1,
-			, 2,
-			P2DQ, 1,
-			, 3,
-			P2BY, 1,
-			Offset(0x228),		/* Port 2 Serial ATA status */
-			P2DD, 4,
-			, 4,
-			P2IS, 4,
-			Offset(0x22C),		/* Port 2 Serial ATA control */
-			P2DI, 4,
-			Offset(0x230),		/* Port 2 Serial ATA error */
-			, 16,
-			P2PR, 1,
-
-			/* Port 3 */
-			Offset(0x2A0),		/* Port 3 Task file status */
-			P3ER, 1,
-			, 2,
-			P3DQ, 1,
-			, 3,
-			P3BY, 1,
-			Offset(0x2A8),		/* Port 3 Serial ATA status */
-			P3DD, 4,
-			, 4,
-			P3IS, 4,
-			Offset(0x2AC),		/* Port 3 Serial ATA control */
-			P3DI, 4,
-			Offset(0x2B0),		/* Port 3 Serial ATA error */
-			, 16,
-			P3PR, 1,
-		}
-	}
-
-	#include "acpi/routing.asl"
-
-	Scope(\_SB) {
-
-		Method(CkOT, 0){
-
-			if(LNotEqual(OSTP, Ones)) {Return(OSTP)}	/* OS version was already detected */
+		Device(PCI0) {
+			/* Describe the AMD Northbridge */
+			#include <northbridge/amd/agesa/family15tn/acpi/northbridge.asl>
 
-			if(CondRefOf(\_OSI,Local1))
-			{
-				Store(1, OSTP)                /* Assume some form of XP */
-				if (\_OSI("Windows 2006"))      /* Vista */
-				{
-					Store(2, OSTP)
-				}
-			} else {
-				If(WCMP(\_OS,"Linux")) {
-					Store(3, OSTP)            /* Linux */
-				} Else {
-					Store(4, OSTP)            /* Gotta be WinCE */
-				}
-			}
-			Return(OSTP)
-		}
+			/* Describe the AMD Fusion Controller Hub Southbridge */
+			#include <southbridge/amd/agesa/hudson/acpi/fch.asl>
 
-		Method(_PIC, 0x01, NotSerialized)
-		{
-			If (Arg0)
-			{
-				\_SB.CIRQ()
-			}
-			Store(Arg0, PMOD)
-		}
-		Method(CIRQ, 0x00, NotSerialized){
-			//Store(0, PIRA)
-			//Store(0, PIRB)
-			//Store(0, PIRC)
-			//Store(0, PIRD)
-			//Store(0, PIRE)
-			//Store(0, PIRF)
-			//Store(0, PIRG)
-			//Store(0, PIRH)
 		}
 
-		Name(IRQB, ResourceTemplate(){
-			IRQ(Level,ActiveLow,Shared){15}
-		})
-
-		Name(IRQP, ResourceTemplate(){
-			IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15}
-		})
-
-		Name(PITF, ResourceTemplate(){
-			IRQ(Level,ActiveLow,Exclusive){9}
-		})
-
-		Device(INTA) {
-			Name(_HID, EISAID("PNP0C0F"))
-			Name(_UID, 1)
-
-			Method(_STA, 0) {
-				if (PIRA) {
-					Return(0x0B) /* sata is invisible */
-				} else {
-					Return(0x09) /* sata is disabled */
-				}
-			} /* End Method(_SB.INTA._STA) */
-
-			Method(_DIS ,0) {
-				/* DBGO("\\_SB\\LNKA\\_DIS\n") */
-				//Store(0x1F, PIRA)
-			} /* End Method(_SB.INTA._DIS) */
-
-			Method(_PRS ,0) {
-				/* DBGO("\\_SB\\LNKA\\_PRS\n") */
-				Return(IRQP)
-			} /* Method(_SB.INTA._PRS) */
-
-			Method(_CRS ,0) {
-				/* DBGO("\\_SB\\LNKA\\_CRS\n") */
-				CreateWordField(IRQB, 0x1, IRQN)
-				ShiftLeft(1, PIRA, IRQN)
-				Return(IRQB)
-			} /* Method(_SB.INTA._CRS) */
-
-			Method(_SRS, 1) {
-				/* DBGO("\\_SB\\LNKA\\_CRS\n") */
-				CreateWordField(ARG0, 1, IRQM)
-
-				/* Use lowest available IRQ */
-				FindSetRightBit(IRQM, Local0)
-				if (Local0) {
-					Decrement(Local0)
-				}
-				//Store(Local0, PIRA)
-			} /* End Method(_SB.INTA._SRS) */
-		} /* End Device(INTA) */
-
-		Device(INTB) {
-			Name(_HID, EISAID("PNP0C0F"))
-			Name(_UID, 2)
-
-			Method(_STA, 0) {
-				if (PIRB) {
-					Return(0x0B) /* sata is invisible */
-				} else {
-					Return(0x09) /* sata is disabled */
-				}
-			} /* End Method(_SB.INTB._STA) */
-
-			Method(_DIS ,0) {
-				/* DBGO("\\_SB\\LNKB\\_DIS\n") */
-				//Store(0, PIRB)
-			} /* End Method(_SB.INTB._DIS) */
-
-			Method(_PRS ,0) {
-				/* DBGO("\\_SB\\LNKB\\_PRS\n") */
-				Return(IRQP)
-			} /* Method(_SB.INTB._PRS) */
-
-			Method(_CRS ,0) {
-				/* DBGO("\\_SB\\LNKB\\_CRS\n") */
-				CreateWordField(IRQB, 0x1, IRQN)
-				ShiftLeft(1, PIRB, IRQN)
-				Return(IRQB)
-			} /* Method(_SB.INTB._CRS) */
-
-			Method(_SRS, 1) {
-				/* DBGO("\\_SB\\LNKB\\_CRS\n") */
-				CreateWordField(ARG0, 1, IRQM)
-
-				/* Use lowest available IRQ */
-				FindSetRightBit(IRQM, Local0)
-				if (Local0) {
-					Decrement(Local0)
-				}
-				Store(Local0, PIRB)
-			} /* End Method(_SB.INTB._SRS) */
-		} /* End Device(INTB)  */
-
-		Device(INTC) {
-			Name(_HID, EISAID("PNP0C0F"))
-			Name(_UID, 3)
-
-			Method(_STA, 0) {
-				if (PIRC) {
-					Return(0x0B) /* sata is invisible */
-				} else {
-					Return(0x09) /* sata is disabled */
-				}
-			} /* End Method(_SB.INTC._STA) */
-
-			Method(_DIS ,0) {
-				/* DBGO("\\_SB\\LNKC\\_DIS\n") */
-				//Store(0, PIRC)
-			} /* End Method(_SB.INTC._DIS) */
-
-			Method(_PRS ,0) {
-				/* DBGO("\\_SB\\LNKC\\_PRS\n") */
-				Return(IRQP)
-			} /* Method(_SB.INTC._PRS) */
-
-			Method(_CRS ,0) {
-				/* DBGO("\\_SB\\LNKC\\_CRS\n") */
-				CreateWordField(IRQB, 0x1, IRQN)
-				ShiftLeft(1, PIRC, IRQN)
-				Return(IRQB)
-			} /* Method(_SB.INTC._CRS) */
-
-			Method(_SRS, 1) {
-				/* DBGO("\\_SB\\LNKC\\_CRS\n") */
-				CreateWordField(ARG0, 1, IRQM)
-
-				/* Use lowest available IRQ */
-				FindSetRightBit(IRQM, Local0)
-				if (Local0) {
-					Decrement(Local0)
-				}
-				Store(Local0, PIRC)
-			} /* End Method(_SB.INTC._SRS) */
-		} /* End Device(INTC)  */
-
-		Device(INTD) {
-			Name(_HID, EISAID("PNP0C0F"))
-			Name(_UID, 4)
-
-			Method(_STA, 0) {
-				if (PIRD) {
-					Return(0x0B) /* sata is invisible */
-				} else {
-					Return(0x09) /* sata is disabled */
-				}
-			} /* End Method(_SB.INTD._STA) */
-
-			Method(_DIS ,0) {
-				/* DBGO("\\_SB\\LNKD\\_DIS\n") */
-				//Store(0, PIRD)
-			} /* End Method(_SB.INTD._DIS) */
-
-			Method(_PRS ,0) {
-				/* DBGO("\\_SB\\LNKD\\_PRS\n") */
-				Return(IRQP)
-			} /* Method(_SB.INTD._PRS) */
-
-			Method(_CRS ,0) {
-				/* DBGO("\\_SB\\LNKD\\_CRS\n") */
-				CreateWordField(IRQB, 0x1, IRQN)
-				ShiftLeft(1, PIRD, IRQN)
-				Return(IRQB)
-			} /* Method(_SB.INTD._CRS) */
-
-			Method(_SRS, 1) {
-				/* DBGO("\\_SB\\LNKD\\_CRS\n") */
-				CreateWordField(ARG0, 1, IRQM)
-
-				/* Use lowest available IRQ */
-				FindSetRightBit(IRQM, Local0)
-				if (Local0) {
-					Decrement(Local0)
-				}
-				Store(Local0, PIRD)
-			} /* End Method(_SB.INTD._SRS) */
-		} /* End Device(INTD)  */
-
-		Device(INTE) {
-			Name(_HID, EISAID("PNP0C0F"))
-			Name(_UID, 5)
-
-			Method(_STA, 0) {
-				if (PIRE) {
-					Return(0x0B) /* sata is invisible */
-				} else {
-					Return(0x09) /* sata is disabled */
-				}
-			} /* End Method(_SB.INTE._STA) */
-
-			Method(_DIS ,0) {
-				/* DBGO("\\_SB\\LNKE\\_DIS\n") */
-				//Store(0, PIRE)
-			} /* End Method(_SB.INTE._DIS) */
-
-			Method(_PRS ,0) {
-				/* DBGO("\\_SB\\LNKE\\_PRS\n") */
-				Return(IRQP)
-			} /* Method(_SB.INTE._PRS) */
-
-			Method(_CRS ,0) {
-				/* DBGO("\\_SB\\LNKE\\_CRS\n") */
-				CreateWordField(IRQB, 0x1, IRQN)
-				ShiftLeft(1, PIRE, IRQN)
-				Return(IRQB)
-			} /* Method(_SB.INTE._CRS) */
-
-			Method(_SRS, 1) {
-				/* DBGO("\\_SB\\LNKE\\_CRS\n") */
-				CreateWordField(ARG0, 1, IRQM)
-
-				/* Use lowest available IRQ */
-				FindSetRightBit(IRQM, Local0)
-				if (Local0) {
-					Decrement(Local0)
-				}
-				Store(Local0, PIRE)
-			} /* End Method(_SB.INTE._SRS) */
-		} /* End Device(INTE)  */
-
-		Device(INTF) {
-			Name(_HID, EISAID("PNP0C0F"))
-			Name(_UID, 6)
-
-			Method(_STA, 0) {
-				if (PIRF) {
-					Return(0x0B) /* sata is invisible */
-				} else {
-					Return(0x09) /* sata is disabled */
-				}
-			} /* End Method(_SB.INTF._STA) */
-
-			Method(_DIS ,0) {
-				/* DBGO("\\_SB\\LNKF\\_DIS\n") */
-				//Store(0, PIRF)
-			} /* End Method(_SB.INTF._DIS) */
-
-			Method(_PRS ,0) {
-				/* DBGO("\\_SB\\LNKF\\_PRS\n") */
-				Return(PITF)
-			} /* Method(_SB.INTF._PRS) */
-
-			Method(_CRS ,0) {
-				/* DBGO("\\_SB\\LNKF\\_CRS\n") */
-				CreateWordField(IRQB, 0x1, IRQN)
-				ShiftLeft(1, PIRF, IRQN)
-				Return(IRQB)
-			} /* Method(_SB.INTF._CRS) */
-
-			Method(_SRS, 1) {
-				/* DBGO("\\_SB\\LNKF\\_CRS\n") */
-				CreateWordField(ARG0, 1, IRQM)
-
-				/* Use lowest available IRQ */
-				FindSetRightBit(IRQM, Local0)
-				if (Local0) {
-					Decrement(Local0)
-				}
-				Store(Local0, PIRF)
-			} /*  End Method(_SB.INTF._SRS) */
-		} /* End Device(INTF)  */
-
-		Device(INTG) {
-			Name(_HID, EISAID("PNP0C0F"))
-			Name(_UID, 7)
-
-			Method(_STA, 0) {
-				if (PIRG) {
-					Return(0x0B) /* sata is invisible */
-				} else {
-					Return(0x09) /* sata is disabled */
-				}
-			} /* End Method(_SB.INTG._STA)  */
-
-			Method(_DIS ,0) {
-				/* DBGO("\\_SB\\LNKG\\_DIS\n") */
-				//Store(0, PIRG)
-			} /* End Method(_SB.INTG._DIS)  */
-
-			Method(_PRS ,0) {
-				/* DBGO("\\_SB\\LNKG\\_PRS\n") */
-				Return(IRQP)
-			} /* Method(_SB.INTG._CRS)  */
-
-			Method(_CRS ,0) {
-				/* DBGO("\\_SB\\LNKG\\_CRS\n") */
-				CreateWordField(IRQB, 0x1, IRQN)
-				ShiftLeft(1, PIRG, IRQN)
-				Return(IRQB)
-			} /* Method(_SB.INTG._CRS)  */
-
-			Method(_SRS, 1) {
-				/* DBGO("\\_SB\\LNKG\\_CRS\n") */
-				CreateWordField(ARG0, 1, IRQM)
-
-				/* Use lowest available IRQ */
-				FindSetRightBit(IRQM, Local0)
-				if (Local0) {
-					Decrement(Local0)
-				}
-				Store(Local0, PIRG)
-			} /* End Method(_SB.INTG._SRS)  */
-		} /* End Device(INTG)  */
-
-		Device(INTH) {
-			Name(_HID, EISAID("PNP0C0F"))
-			Name(_UID, 8)
-
-			Method(_STA, 0) {
-				if (PIRH) {
-					Return(0x0B) /* sata is invisible */
-				} else {
-					Return(0x09) /* sata is disabled */
-				}
-			} /* End Method(_SB.INTH._STA)  */
-
-			Method(_DIS ,0) {
-				/* DBGO("\\_SB\\LNKH\\_DIS\n") */
-				//Store(0, PIRH)
-			} /* End Method(_SB.INTH._DIS)  */
-
-			Method(_PRS ,0) {
-				/* DBGO("\\_SB\\LNKH\\_PRS\n") */
-				Return(IRQP)
-			} /* Method(_SB.INTH._CRS)  */
-
-			Method(_CRS ,0) {
-				/* DBGO("\\_SB\\LNKH\\_CRS\n") */
-				CreateWordField(IRQB, 0x1, IRQN)
-				ShiftLeft(1, PIRH, IRQN)
-				Return(IRQB)
-			} /* Method(_SB.INTH._CRS)  */
-
-			Method(_SRS, 1) {
-				/* DBGO("\\_SB\\LNKH\\_CRS\n") */
-				CreateWordField(ARG0, 1, IRQM)
-
-				/* Use lowest available IRQ */
-				FindSetRightBit(IRQM, Local0)
-				if (Local0) {
-					Decrement(Local0)
-				}
-				//Store(Local0, PIRH)
-			} /* End Method(_SB.INTH._SRS)  */
-		} /* End Device(INTH)   */
+		/* Describe PCI INT[A-H] for the Southbridge */
+		#include <southbridge/amd/agesa/hudson/acpi/pci_int.asl>
 
 	}   /* End Scope(_SB)  */
 
-	/* Supported sleep states: */
-	Name(\_S0, Package () {0x00, 0x00, 0x00, 0x00} )	/* (S0) - working state */
-
-	If (LAnd(SSFG, 0x01)) {
-		Name(\_S1, Package () {0x01, 0x01, 0x00, 0x00} )	/* (S1) - sleeping w/CPU context */
-	}
-	If (LAnd(SSFG, 0x02)) {
-		Name(\_S2, Package () {0x02, 0x02, 0x00, 0x00} )	/* (S2) - "light" Suspend to RAM */
-	}
-	If (LAnd(SSFG, 0x04)) {
-		Name(\_S3, Package () {0x03, 0x03, 0x00, 0x00} )	/* (S3) - Suspend to RAM */
-	}
-	If (LAnd(SSFG, 0x08)) {
-		Name(\_S4, Package () {0x04, 0x04, 0x00, 0x00} )	/* (S4) - Suspend to Disk */
-	}
-
-	Name(\_S5, Package () {0x05, 0x05, 0x00, 0x00} )	/* (S5) - Soft Off */
-
-	Name(\_SB.CSPS ,0)				/* Current Sleep State (S0, S1, S2, S3, S4, S5) */
-	Name(CSMS, 0)			/* Current System State */
-
-	/* Wake status package */
-	Name(WKST,Package(){Zero, Zero})
-
-	/*
-	* \_PTS - Prepare to Sleep method
-	*
-	*	Entry:
-	*		Arg0=The value of the sleeping state S1=1, S2=2, etc
-	*
-	* Exit:
-	*		-none-
-	*
-	* The _PTS control method is executed at the beginning of the sleep process
-	* for S1-S5. The sleeping value is passed to the _PTS control method.	This
-	* control method may be executed a relatively long time before entering the
-	* sleep state and the OS may abort	the operation without notification to
-	* the ACPI driver.  This method cannot modify the configuration or power
-	* state of any device in the system.
-	*/
-	Method(_PTS, 1) {
-		/* DBGO("\\_PTS\n") */
-		/* DBGO("From S0 to S") */
-		/* DBGO(Arg0) */
-		/* DBGO("\n") */
-
-		/* Don't allow PCIRST# to reset USB */
-		//if (LEqual(Arg0,3)){
-		//	Store(0,URRE)
-		//}
-
-		/* Clear sleep SMI status flag and enable sleep SMI trap. */
-		/*Store(One, CSSM)
-		Store(One, SSEN)*/
-
-		/* On older chips, clear PciExpWakeDisEn */
-		/*if (LLessEqual(\_SB.SBRI, 0x13)) {
-		*    	Store(0,\_SB.PWDE)
-		*}
-		*/
-
-		/* Clear wake status structure. */
-		Store(0, Index(WKST,0))
-		Store(0, Index(WKST,1))
-		Store(7, UPWS)
-	} /* End Method(\_PTS) */
+	/* Describe SMBUS for the Southbridge */
+	#include <southbridge/amd/agesa/hudson/acpi/smbus.asl>
 
-	/*
-	*  The following method results in a "not a valid reserved NameSeg"
-	*  warning so I have commented it out for the duration.  It isn't
-	*  used, so it could be removed.
-	*
-	*
-	*  	\_GTS OEM Going To Sleep method
-	*
-	*  	Entry:
-	*  		Arg0=The value of the sleeping state S1=1, S2=2
-	*
-	*  	Exit:
-	*  		-none-
-	*
-	*  Method(\_GTS, 1) {
-	*  DBGO("\\_GTS\n")
-	*  DBGO("From S0 to S")
-	*  DBGO(Arg0)
-	*  DBGO("\n")
-	*  }
-	*/
+	/* Define the General Purpose Events for the platform */
+	#include "acpi/gpe.asl"
 
-	/*
-	*	\_BFS OEM Back From Sleep method
-	*
-	*	Entry:
-	*		Arg0=The value of the sleeping state S1=1, S2=2
-	*
-	*	Exit:
-	*		-none-
-	*/
-	Method(\_BFS, 1) {
-		/* DBGO("\\_BFS\n") */
-		/* DBGO("From S") */
-		/* DBGO(Arg0) */
-		/* DBGO(" to S0\n") */
-	}
+	/* Define the Thermal zones and methods for the platform */
+	#include "acpi/thermal.asl"
 
-	/*
-	*  \_WAK System Wake method
-	*
-	*	Entry:
-	*		Arg0=The value of the sleeping state S1=1, S2=2
-	*
-	*	Exit:
-	*		Return package of 2 DWords
-	*		Dword 1 - Status
-	*			0x00000000	wake succeeded
-	*			0x00000001	Wake was signaled but failed due to lack of power
-	*			0x00000002	Wake was signaled but failed due to thermal condition
-	*		Dword 2 - Power Supply state
-	*			if non-zero the effective S-state the power supply entered
-	*/
-	Method(\_WAK, 1) {
-		/* DBGO("\\_WAK\n") */
-		/* DBGO("From S") */
-		/* DBGO(Arg0) */
-		/* DBGO(" to S0\n") */
+	/* Define the System Indicators for the platform */
+	#include "acpi/si.asl"
 
-		/* Re-enable HPET */
-		//Store(1,HPDE)
-
-		/* Restore PCIRST# so it resets USB */
-		//if (LEqual(Arg0,3)){
-		//	Store(1,URRE)
-		//}
-
-		/* Arbitrarily clear PciExpWakeStatus */
-		//Store(PWST, PWST)
-
-		/* if(DeRefOf(Index(WKST,0))) {
-		*	Store(0, Index(WKST,1))
-		* } else {
-		*	Store(Arg0, Index(WKST,1))
-		* }
-		*/
-		Store(1, USBS)
-		Return(WKST)
-	} /* End Method(\_WAK) */
-
-	Scope(\_GPE) {	/* Start Scope GPE */
-		/*  General event 0  */
-		/* Method(_L00) {
-		*	DBGO("\\_GPE\\_L00\n")
-		* }
-		*/
-
-		/*  General event 1  */
-		/* Method(_L01) {
-		*	DBGO("\\_GPE\\_L00\n")
-		* }
-		*/
-
-		/*  General event 2  */
-		/* Method(_L02) {
-		*	DBGO("\\_GPE\\_L00\n")
-		* }
-		*/
-
-		/*  General event 3  */
-		Method(_L03) {
-			/* DBGO("\\_GPE\\_L00\n") */
-			Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
-		}
-
-		/*  General event 4  */
-		/* Method(_L04) {
-		*	DBGO("\\_GPE\\_L00\n")
-		* }
-		*/
-
-		/*  General event 5  */
-		/* Method(_L05) {
-		*	DBGO("\\_GPE\\_L00\n")
-		* }
-		*/
-
-		/*  General event 6 - Used for GPM6, moved to USB.asl */
-		/* Method(_L06) {
-		*	DBGO("\\_GPE\\_L00\n")
-		* }
-		*/
-
-		/*  General event 7 - Used for GPM7, moved to USB.asl */
-		/* Method(_L07) {
-		*	DBGO("\\_GPE\\_L07\n")
-		* }
-		*/
-
-		/*  Legacy PM event  */
-		Method(_L08) {
-			/* DBGO("\\_GPE\\_L08\n") */
-		}
-
-		/*  Temp warning (TWarn) event  */
-		Method(_L09) {
-			/* DBGO("\\_GPE\\_L09\n") */
-			/* Notify (\_TZ.TZ00, 0x80) */
-		}
-
-		/*  Reserved  */
-		/* Method(_L0A) {
-		*	DBGO("\\_GPE\\_L0A\n")
-		* }
-		*/
-
-		/*  USB controller PME#  */
-		Method(_L0B) {
-			/* DBGO("\\_GPE\\_L0B\n") */
-			Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */
-			Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */
-			Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */
-			Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */
-			Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */
-			Notify(\_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */
-			Notify(\_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */
-			Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
-		}
-
-		/*  AC97 controller PME#  */
-		/* Method(_L0C) {
-		*	DBGO("\\_GPE\\_L0C\n")
-		* }
-		*/
-
-		/*  OtherTherm PME#  */
-		/* Method(_L0D) {
-		*	DBGO("\\_GPE\\_L0D\n")
-		* }
-		*/
-
-		/*  GPM9 SCI event - Moved to USB.asl */
-		/* Method(_L0E) {
-		*	DBGO("\\_GPE\\_L0E\n")
-		* }
-		*/
-
-		/*  PCIe HotPlug event  */
-		/* Method(_L0F) {
-		* 	DBGO("\\_GPE\\_L0F\n")
-		* }
-		*/
-
-		/*  ExtEvent0 SCI event  */
-		Method(_L10) {
-			/* DBGO("\\_GPE\\_L10\n") */
-		}
-
-		/*  ExtEvent1 SCI event  */
-		Method(_L11) {
-			/* DBGO("\\_GPE\\_L11\n") */
-		}
-
-		/*  PCIe PME# event  */
-		/* Method(_L12) {
-		*	DBGO("\\_GPE\\_L12\n")
-		* }
-		*/
-
-		/*  GPM0 SCI event - Moved to USB.asl */
-		/* Method(_L13) {
-		* 	DBGO("\\_GPE\\_L13\n")
-		* }
-		*/
-
-		/*  GPM1 SCI event - Moved to USB.asl */
-		/* Method(_L14) {
-		* 	DBGO("\\_GPE\\_L14\n")
-		* }
-		*/
-
-		/*  GPM2 SCI event - Moved to USB.asl */
-		/* Method(_L15) {
-		* 	DBGO("\\_GPE\\_L15\n")
-		* }
-		*/
-
-		/*  GPM3 SCI event - Moved to USB.asl */
-		/* Method(_L16) {
-		*	DBGO("\\_GPE\\_L16\n")
-		* }
-		*/
-
-		/*  GPM8 SCI event - Moved to USB.asl */
-		/* Method(_L17) {
-		* 	DBGO("\\_GPE\\_L17\n")
-		* }
-		*/
-
-		/*  GPIO0 or GEvent8 event  */
-		Method(_L18) {
-			/* DBGO("\\_GPE\\_L18\n") */
-			Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */
-			Notify(\_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */
-			Notify(\_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */
-			Notify(\_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */
-			Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
-		}
-
-		/*  GPM4 SCI event - Moved to USB.asl */
-		/* Method(_L19) {
-		* 	DBGO("\\_GPE\\_L19\n")
-		* }
-		*/
-
-		/*  GPM5 SCI event - Moved to USB.asl */
-		/* Method(_L1A) {
-		*	DBGO("\\_GPE\\_L1A\n")
-		* }
-		*/
-
-		/*  Azalia SCI event  */
-		Method(_L1B) {
-			/* DBGO("\\_GPE\\_L1B\n") */
-			Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */
-			Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
-		}
-
-		/*  GPM6 SCI event - Reassigned to _L06 */
-		/* Method(_L1C) {
-		*	DBGO("\\_GPE\\_L1C\n")
-		* }
-		*/
-
-		/*  GPM7 SCI event - Reassigned to _L07 */
-		/* Method(_L1D) {
-		*	DBGO("\\_GPE\\_L1D\n")
-		* }
-		*/
-
-		/*  GPIO2 or GPIO66 SCI event  */
-		/* Method(_L1E) {
-		* 	DBGO("\\_GPE\\_L1E\n")
-		* }
-		*/
-
-		/*  SATA SCI event - Moved to sata.asl */
-		/* Method(_L1F) {
-		*	 DBGO("\\_GPE\\_L1F\n")
-		* }
-		*/
-
-	} 	/* End Scope GPE */
-
-	//#include "acpi/usb.asl"
-
-	/* System Bus */
-	Scope(\_SB) { /* Start \_SB scope */
-		#include "../../../arch/x86/acpi/globutil.asl" /* global utility methods expected within the \_SB scope */
-
-		/*  _SB.PCI0 */
-		/* Note: Only need HID on Primary Bus */
-		Device(PCI0) {
-			External (TOM1)
-			External (TOM2)
-			Name(_HID, EISAID("PNP0A03"))
-			Name(_ADR, 0x00180000)	/* Dev# = BSP Dev#, Func# = 0 */
-			Method(_BBN, 0) { /* Bus number = 0 */
-				Return(0)
-			}
-			Method(_STA, 0) {
-				/* DBGO("\\_SB\\PCI0\\_STA\n") */
-				Return(0x0B)     /* Status is visible */
-			}
-
-			Method(_PRT,0) {
-				If(PMOD){ Return(APR0) }   /* APIC mode */
-				Return (PR0)                  /* PIC Mode */
-			} /* end _PRT */
-
-			/* Describe the Northbridge devices Dev0 ,Func0*/
-			Device(AMRT) {
-				Name(_ADR, 0x00000000)
-			} /* end AMRT */
-
-#if 0 //not used in Parmer
-			/* Dev3 is also an external GFX bridge */
-			Device(PBR3) {
-				Name(_ADR, 0x00030000)
-				Name(_PRW, Package() {0x18, 4})
-				Method(_PRT,0) {
-					If(PMOD){ Return(APS3) }   /* APIC mode */
-					Return (PS3)                  /* PIC Mode */
-				} /* end _PRT */
-			} /* end PBR3 */
-#endif
-
-			Device(PBR4) {
-				Name(_ADR, 0x00040000)
-				Name(_PRW, Package() {0x18, 4})
-				Method(_PRT,0) {
-					If(PMOD){ Return(APS4) }   /* APIC mode */
-					Return (PS4)                  /* PIC Mode */
-				} /* end _PRT */
-			} /* end PBR4 */
-
-			Device(PBR5) {
-				Name(_ADR, 0x00050000)
-				Name(_PRW, Package() {0x18, 4})
-				Method(_PRT,0) {
-					If(PMOD){ Return(APS5) }   /* APIC mode */
-					Return (PS5)                  /* PIC Mode */
-				} /* end _PRT */
-			} /* end PBR5 */
-
-			Device(PBR6) {
-				Name(_ADR, 0x00060000)
-				Name(_PRW, Package() {0x18, 4})
-				Method(_PRT,0) {
-					If(PMOD){ Return(APS6) }   /* APIC mode */
-					Return (PS6)                  /* PIC Mode */
-				} /* end _PRT */
-			} /* end PBR6 */
-
-			/* The onboard EtherNet chip */
-			Device(PBR7) {
-				Name(_ADR, 0x00070000)
-				Name(_PRW, Package() {0x18, 4})
-				Method(_PRT,0) {
-					If(PMOD){ Return(APS7) }   /* APIC mode */
-					Return (PS7)                  /* PIC Mode */
-				} /* end _PRT */
-			} /* end PBR7 */
-
-			/* PCI slot 1, 2, 3 */
-			Device(PIBR) {
-				Name(_ADR, 0x00140004)
-				Name(_PRW, Package() {0x18, 4})
-
-				Method(_PRT, 0) {
-					Return (PCIB)
-				}
-			}
-
-			/* Describe the Southbridge devices */
-			Device(STCR) {
-				Name(_ADR, 0x00110000)
-				//#include "acpi/sata.asl"
-			} /* end STCR */
-
-			Device(UOH1) {
-				Name(_ADR, 0x00120000)
-				Name(_PRW, Package() {0x0B, 3})
-			} /* end UOH1 */
-
-			Device(UOH2) {
-				Name(_ADR, 0x00120002)
-				Name(_PRW, Package() {0x0B, 3})
-			} /* end UOH2 */
-
-			Device(UOH3) {
-				Name(_ADR, 0x00130000)
-				Name(_PRW, Package() {0x0B, 3})
-			} /* end UOH3 */
-
-			Device(UOH4) {
-				Name(_ADR, 0x00130002)
-				Name(_PRW, Package() {0x0B, 3})
-			} /* end UOH4 */
-
-			Device(UOH5) {
-				Name(_ADR, 0x00160000)
-				Name(_PRW, Package() {0x0B, 3})
-			} /* end UOH5 */
-
-			Device(UOH6) {
-				Name(_ADR, 0x00160002)
-				Name(_PRW, Package() {0x0B, 3})
-			} /* end UOH5 */
-
-			Device(UEH1) {
-				Name(_ADR, 0x00140005)
-				Name(_PRW, Package() {0x0B, 3})
-			} /* end UEH1 */
-
-			Device(XHC0) {
-				Name(_ADR, 0x00100000)
-				Name(_PRW, Package() {0x0B, 4})
-			} /* end XHC0 */
-			Device(XHC1) {
-				Name(_ADR, 0x00100001)
-				Name(_PRW, Package() {0x0B, 4})
-			} /* end XHC1 */
-
-			Device(SBUS) {
-				Name(_ADR, 0x00140000)
-			} /* end SBUS */
-
-			/* Primary (and only) IDE channel */
-			Device(IDEC) {
-				Name(_ADR, 0x00140001)
-				//#include "acpi/ide.asl"
-			} /* end IDEC */
-
-			Device(AZHD) {
-				Name(_ADR, 0x00140002)
-				OperationRegion(AZPD, PCI_Config, 0x00, 0x100)
-					Field(AZPD, AnyAcc, NoLock, Preserve) {
-					offset (0x42),
-					NSDI, 1,
-					NSDO, 1,
-					NSEN, 1,
-					offset (0x44),
-					IPCR, 4,
-					offset (0x54),
-					PWST, 2,
-					, 6,
-					PMEB, 1,
-					, 6,
-					PMST, 1,
-					offset (0x62),
-					MMCR, 1,
-					offset (0x64),
-					MMLA, 32,
-					offset (0x68),
-					MMHA, 32,
-					offset (0x6C),
-					MMDT, 16,
-				}
-
-				Method(_INI) {
-					If(LEqual(OSTP,3)){   /* If we are running Linux */
-						Store(zero, NSEN)
-						Store(one, NSDO)
-						Store(one, NSDI)
-					}
-				}
-			} /* end AZHD */
-
-			Device(LIBR) {
-				Name(_ADR, 0x00140003)
-				/* Method(_INI) {
-				*	DBGO("\\_SB\\PCI0\\LpcIsaBr\\_INI\n")
-				} */ /* End Method(_SB.SBRDG._INI) */
-
-			    OperationRegion(CFG,PCI_Config,0x0,0x100) // Map PCI Configuration Space
-				Field(CFG,DWordAcc,NoLock,Preserve){
-				Offset(0xA0),
-				BAR,32}		// SPI Controller Base Address Register (Index 0xA0)
-
-				Device(LDRC)	// LPC device: Resource consumption
-				{
-						Name (_HID, EISAID("PNP0C02"))  // ID for Motherboard resources
-						Name (CRS, ResourceTemplate ()  // Current Motherboard resources
-						{
-							Memory32Fixed(ReadWrite,    // Setup for fixed resource location for SPI base address
-							0x00000000,					// Address Base
-							0x00000000,					// Address Length
-							BAR0						// Descriptor Name
-							)
-						})
-
-						Method(_CRS,0,NotSerialized)
-						{
-							CreateDwordField(^CRS,^BAR0._BAS,SPIB)  // Field to hold SPI base address
-							CreateDwordField(^CRS,^BAR0._LEN,SPIL)  // Field to hold SPI address length
-							Store(BAR,SPIB)		// SPI base address mapped
-							Store(0x1000,SPIL)	// 4k space mapped
-							Return(CRS)
-						}
-				}
-
-				/* Real Time Clock Device */
-				Device(RTC0) {
-					Name(_HID, EISAID("PNP0B00"))   /* AT Real Time Clock (not PIIX4 compatible) */
-					Name(_CRS, ResourceTemplate() {
-						IRQNoFlags(){8}
-						IO(Decode16,0x0070, 0x0070, 0, 2)
-						/* IO(Decode16,0x0070, 0x0070, 0, 4) */
-					})
-				} /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */
-
-				Device(TMR) {	/* Timer */
-					Name(_HID,EISAID("PNP0100"))	/* System Timer */
-					Name(_CRS, ResourceTemplate() {
-						IRQNoFlags(){0}
-						IO(Decode16, 0x0040, 0x0040, 0, 4)
-						/* IO(Decode16, 0x0048, 0x0048, 0, 4) */
-					})
-				} /* End Device(_SB.PCI0.LpcIsaBr.TMR) */
-
-				Device(SPKR) {	/* Speaker */
-					Name(_HID,EISAID("PNP0800"))	/* AT style speaker */
-					Name(_CRS, ResourceTemplate() {
-						IO(Decode16, 0x0061, 0x0061, 0, 1)
-					})
-				} /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */
-
-				Device(PIC) {
-					Name(_HID,EISAID("PNP0000"))	/* AT Interrupt Controller */
-					Name(_CRS, ResourceTemplate() {
-						IRQNoFlags(){2}
-						IO(Decode16,0x0020, 0x0020, 0, 2)
-						IO(Decode16,0x00A0, 0x00A0, 0, 2)
-						/* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */
-						/* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */
-					})
-				} /* End Device(_SB.PCI0.LpcIsaBr.PIC) */
-
-				Device(MAD) { /* 8257 DMA */
-					Name(_HID,EISAID("PNP0200"))	/* Hardware Device ID */
-					Name(_CRS, ResourceTemplate() {
-						DMA(Compatibility,BusMaster,Transfer8){4}
-						IO(Decode16, 0x0000, 0x0000, 0x10, 0x10)
-						IO(Decode16, 0x0081, 0x0081, 0x01, 0x03)
-						IO(Decode16, 0x0087, 0x0087, 0x01, 0x01)
-						IO(Decode16, 0x0089, 0x0089, 0x01, 0x03)
-						IO(Decode16, 0x008F, 0x008F, 0x01, 0x01)
-						IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20)
-					}) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */
-				} /* End Device(_SB.PCI0.LpcIsaBr.MAD) */
-
-				Device(COPR) {
-					Name(_HID,EISAID("PNP0C04"))	/* Math Coprocessor */
-					Name(_CRS, ResourceTemplate() {
-						IO(Decode16, 0x00F0, 0x00F0, 0, 0x10)
-						IRQNoFlags(){13}
-					})
-				} /* End Device(_SB.PCI0.LpcIsaBr.COPR) */
-			} /* end LIBR */
-
-			Device(HPBR) {
-				Name(_ADR, 0x00140004)
-			} /* end HostPciBr */
-
-			Device(ACAD) {
-				Name(_ADR, 0x00140005)
-			} /* end Ac97audio */
-
-			Device(ACMD) {
-				Name(_ADR, 0x00140006)
-			} /* end Ac97modem */
-
-			Name(CRES, ResourceTemplate() {
-				IO(Decode16, 0x0CF8, 0x0CF8, 1,	8)
-
-				WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
-					0x0000,			/* address granularity */
-					0x0000,			/* range minimum */
-					0x0CF7,			/* range maximum */
-					0x0000,			/* translation */
-					0x0CF8			/* length */
-				)
-				WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
-					0x0000,			/* address granularity */
-					0x03B0,			/* range minimum */
-					0x03DF,			/* range maximum */
-					0x0000,			/* translation */
-					0x0030			/* length */
-				)
-
-				WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
-					0x0000,			/* address granularity */
-					0x0D00,			/* range minimum */
-					0xFFFF,			/* range maximum */
-					0x0000,			/* translation */
-					0xF300			/* length */
-				)
-
-				Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) 	/* VGA memory space */
-				Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1)	/* Assume C0000-E0000 empty */
-                                /* memory space for PCI BARs below 4GB */
-                                Memory32Fixed(ReadOnly, 0x00000000, 0x00000000, MMIO)
-			}) /* End Name(_SB.PCI0.CRES) */
-
-			Method(_CRS, 0) {
-				/* DBGO("\\_SB\\PCI0\\_CRS\n") */
-				CreateDWordField(CRES, ^MMIO._BAS, MM1B)
-                                CreateDWordField(CRES, ^MMIO._LEN, MM1L)
-                                /*
-                                 * Declare memory between TOM1 and 4GB as available
-                                 * for PCI MMIO.
-                                 * Use ShiftLeft to avoid 64bit constant (for XP).
-                                 * This will work even if the OS does 32bit arithmetic, as
-                                 * 32bit (0x00000000 - TOM1) will wrap and give the same
-                                 * result as 64bit (0x100000000 - TOM1).
-                                 */
-                                Store(TOM1, MM1B)
-                                ShiftLeft(0x10000000, 4, Local0)
-                                Subtract(Local0, TOM1, Local0)
-                                Store(Local0, MM1L)
-
-				Return(CRES) /* note to change the Name buffer */
-			} /* end of Method(_SB.PCI0._CRS) */
-
-			/*
-			*
-			*               FIRST METHOD CALLED UPON BOOT
-			*
-			*  1. If debugging, print current OS and ACPI interpreter.
-			*  2. Get PCI Interrupt routing from ACPI VSM, this
-			*     value is based on user choice in BIOS setup.
-			*/
-			Method(_INI, 0) {
-				/* DBGO("\\_SB\\_INI\n") */
-				/* DBGO("   DSDT.ASL code from ") */
-				/* DBGO(__DATE__) */
-				/* DBGO(" ") */
-				/* DBGO(__TIME__) */
-				/* DBGO("\n   Sleep states supported: ") */
-				/* DBGO("\n") */
-				/* DBGO("   \\_OS=") */
-				/* DBGO(\_OS) */
-				/* DBGO("\n   \\_REV=") */
-				/* DBGO(\_REV) */
-				/* DBGO("\n") */
-
-				/* Determine the OS we're running on */
-				CkOT()
-
-				/* On older chips, clear PciExpWakeDisEn */
-				/*if (LLessEqual(\SBRI, 0x13)) {
-				*    	Store(0,\PWDE)
-				* }
-				*/
-				/* TODO: It is unstable. */
-				//#include "acpi/AmdImc.asl" /* Hudson IMC function */
-				//ITZE() /* enable IMC Fan Control*/
-			} /* End Method(_SB._INI) */
-		} /* End Device(PCI0)  */
-
-		Device(PWRB) {	/* Start Power button device */
-			Name(_HID, EISAID("PNP0C0C"))
-			Name(_UID, 0xAA)
-			Name(_PRW, Package () {3, 0x04})	/* wake from S1-S4 */
-			Name(_STA, 0x0B) /* sata is invisible */
-		}
-	} /* End \_SB scope */
-
-	Scope(\_SI) {
-		Method(_SST, 1) {
-			/* DBGO("\\_SI\\_SST\n") */
-			/* DBGO("   New Indicator state: ") */
-			/* DBGO(Arg0) */
-			/* DBGO("\n") */
-		}
-	} /* End Scope SI */
 }
 /* End of ASL file */