- Moved hlt() to it's own header.

- Reworked pnp superio device support.  Now complete superio support is less than 100 lines.
- Added support for hard coding resource assignments in Config.lb
- Minor bug fixes to romcc
- Initial support for catching the x86 processor BIST error codes.  I've only seen
  this trigger once in production during a very suspcious reset but...
- added raminit_test to test the code paths in raminit.c for the Opteron
- Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED
  so we can tell what we have really done.
- Added generic AGP/IOMMU setting code to x86
- Added an implementation of memmove and removed reserved identifiers from memcpy
- Added minimal support for booting on pre b3 stepping K8 cores
- Moved the checksum on amd8111 boards because our default location was on top of
  extended RTC registers
- On the Hdama added support for enabling i2c hub so we can get at the temperature
  sensors.  Not that i2c bus was implemented well enough to make that useful.
- Redid the Opteron port so we should only need one reset and most of memory initialization
  is done in cpu_fixup.  This is much, much faster.
- Attempted to make the VGA IO region assigment work.  The code seems to work now...
- Redid the error handling in amdk8/raminit.c to distinguish between a bad value
  and a smbus error, and moved memory clearing out to cpufixup.
- Removed CONFIG_KEYBOARD as it was useless.  See pc87360/superio.c for how to
  setup a legacy keyboard properly.
- Reworked the register values for standard hardware, moving the defintions from
  chip.h into the headers of the initialization routines.  This is much saner
  and is actually implemented.
- Made the hdama port an under clockers BIOS.  I debuged so many interesting problems.
- On amd8111_lpc added setup of architectural/legacy hardware
- Enabled PCI error reporting as much as possible.
- Enhanded build_opt_tbl to generate a header of the cmos option locations so
  that romcc compiled code can query the cmos options.
- In romcc gracefully handle function names that degenerate into function pointers
- Bumped the version to 1.1.6 as we are getting closer to 2.0

  TODO finish optimizing the HT links of non dual boards
  TODO make all Opteron board work again
  TODO convert all superio devices to use the new helpers
  TODO convert the via/epia to freebios2 conventions
  TODO cpu fixup/setup by cpu type


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 53 insertions, 28 deletions

diff --git a/src/mainboard/amd/solo/Config.lb b/src/mainboard/amd/solo/Config.lb
index 1372e46005..bb9044eb0a 100644
--- a/src/mainboard/amd/solo/Config.lb
+++ b/src/mainboard/amd/solo/Config.lb
@@ -23,6 +23,12 @@ uses XIP_ROM_BASE
 uses STACK_SIZE
 uses HEAP_SIZE
 uses USE_OPTION_TABLE
+uses LB_CKS_RANGE_START
+uses LB_CKS_RANGE_END
+uses LB_CKS_LOC
+uses MAINBOARD_PART_NUMBER
+uses MAINBOARD_VENDOR
+
 
 ## ROM_SIZE is the size of boot ROM that this board will use.
 default ROM_SIZE=262144
@@ -59,7 +65,14 @@ default HAVE_MP_TABLE=1
 default HAVE_OPTION_TABLE=1
 
 ##
-## AMD Solo is a 1cpu board 
+## Move the default LinuxBIOS cmos range off of AMD RTC registers
+##
+default LB_CKS_RANGE_START=49
+default LB_CKS_RANGE_END=122
+default LB_CKS_LOC=123
+
+##
+## AMD Solo is a 1cpu board
 ##
 default CONFIG_SMP=1
 default CONFIG_MAX_CPUS=1
@@ -152,7 +165,7 @@ object reset.o
 ## Romcc output
 ##
 makerule ./failover.E
-	depends "$(MAINBOARD)/failover.c" 
+	depends "$(MAINBOARD)/failover.c"
 	action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E"
 end
 
@@ -161,13 +174,13 @@ makerule ./failover.inc
 	action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E"
 end
 
-makerule ./auto.E 
-	depends	"$(MAINBOARD)/auto.c" 
-	action	"$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E"
+makerule ./auto.E
+	depends	"$(MAINBOARD)/auto.c option_table.h "
+	action	"$(CPP) -I$(TOP)/src -I. $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E"
 end
-makerule ./auto.inc 
+makerule ./auto.inc
 	depends "./auto.E ./romcc"
-	action	"./romcc -mcpu=k8 -O ./auto.E > auto.inc"
+	action	"./romcc -mcpu=k8 -O2 ./auto.E > auto.inc"
 end
 
 ##
@@ -175,18 +188,19 @@ end
 ##
 mainboardinit cpu/i386/entry16.inc
 mainboardinit cpu/i386/entry32.inc
+#mainboardinit cpu/i386/bist32.inc
 ldscript /cpu/i386/entry16.lds
 ldscript /cpu/i386/entry32.lds
 
 ##
 ## Build our reset vector (This is where linuxBIOS is entered)
 ##
-if USE_FALLBACK_IMAGE 
-	mainboardinit cpu/i386/reset16.inc 
-	ldscript /cpu/i386/reset16.lds 
+if USE_FALLBACK_IMAGE
+	mainboardinit cpu/i386/reset16.inc
+	ldscript /cpu/i386/reset16.lds
 else
-	mainboardinit cpu/i386/reset32.inc 
-	ldscript /cpu/i386/reset32.lds 
+	mainboardinit cpu/i386/reset32.inc
+	ldscript /cpu/i386/reset32.lds
 end
 
 ### Should this be in the northbridge code?
@@ -204,12 +218,12 @@ ldscript /arch/i386/lib/id.lds
 mainboardinit cpu/k8/earlymtrr.inc
 
 ###
-### This is the early phase of linuxBIOS startup 
+### This is the early phase of linuxBIOS startup
 ### Things are delicate and we test to see if we should
 ### failover to another image.
 ###
 if USE_FALLBACK_IMAGE
-	ldscript /arch/i386/lib/failover.lds 
+	ldscript /arch/i386/lib/failover.lds
 	mainboardinit ./failover.inc
 end
 
@@ -225,7 +239,7 @@ mainboardinit ./auto.inc
 mainboardinit cpu/k8/disable_mmx_sse.inc
 
 ##
-## Include the secondary Configuration files 
+## Include the secondary Configuration files
 ##
 dir /pc80
 config chip.h
@@ -254,19 +268,29 @@ northbridge amd/amdk8 "mc0"
 		pci 1:0.2 on
 		# pci 1:1.0 off
 		superio NSC/pc87360 link 1
-			pnp 2e.0
-			pnp 2e.1
-			pnp 2e.2
-			pnp 2e.3
-			pnp 2e.4
-			pnp 2e.5
-			pnp 2e.6
-			pnp 2e.7
-			pnp 2e.8
-			pnp 2e.9
-			pnp 2e.a
-			register "com1" = "{1, 0, 0x3f8, 4}"
-			register "lpt" = "{1}"
+			pnp 2e.0 off  # Floppy
+				 io 0x60 = 0x3f0
+				irq 0x70 = 6
+				drq 0x74 = 2
+			pnp 2e.1 off  # Parallel Port
+				 io 0x60 = 0x378
+				irq 0x70 = 7
+			pnp 2e.2 off # Com 2
+				 io 0x60 = 0x2f8
+				irq 0x70 = 3
+			pnp 2e.3 on  # Com 1
+				 io 0x60 = 0x3f8
+				irq 0x70 = 4
+			pnp 2e.4 off # SWC
+			pnp 2e.5 off # Mouse
+			pnp 2e.6 on  # Keyboard
+				 io 0x60 = 0x60
+				 io 0x62 = 0x64
+				irq 0x70 = 1
+			pnp 2e.7 off # GPIO
+			pnp 2e.8 off # ACB
+			pnp 2e.9 off # FSCM
+			pnp 2e.a off # WDT
 		end
 	end
 end
@@ -279,4 +303,5 @@ end
 ##
 mainboardinit pc80/serial.inc
 mainboardinit arch/i386/lib/console.inc
+#mainboardinit cpu/i386/bist32_fail.inc