AMD Thatcher Board based on trinity

Thatcher features: Family 15 trinity FP2. Hudson.
close to Parmer.
This board and parmer both need to revert the change
http://review.coreboot.org/#/c/1359/, and add thatcher's own
chip.h,otherwise the mainboard_enable can not be called.

Change-Id: I54e1cfca845fbcea1d3aad5eff08d760d0d215c9
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: zbao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/1382
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>

1 files changed, 64 insertions, 0 deletions

diff --git a/src/mainboard/amd/thatcher/reset.c b/src/mainboard/amd/thatcher/reset.c
new file mode 100644
index 0000000000..5735fa2446
--- /dev/null
+++ b/src/mainboard/amd/thatcher/reset.c
@@ -0,0 +1,64 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <reset.h>
+#include <arch/io.h>		/*inb, outb*/
+#include <arch/romcc_io.h>	/*pci_read_config32, device_t, PCI_DEV*/
+
+#define HT_INIT_CONTROL		0x6C
+#define HTIC_BIOSR_Detect	(1<<5)
+
+#if CONFIG_MAX_PHYSICAL_CPUS > 32
+#define NODE_PCI(x, fn)	((x<32)?(PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)):(PCI_DEV((CONFIG_CBB-1),(CONFIG_CDB+x-32),fn)))
+#else
+#define NODE_PCI(x, fn)	PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)
+#endif
+
+static inline void set_bios_reset(void)
+{
+	u32 nodes;
+	u32 htic;
+	device_t dev;
+	int i;
+
+	nodes = ((pci_read_config32(PCI_DEV(CONFIG_CBB, CONFIG_CDB, 0), 0x60) >> 4) & 7) + 1;
+	for(i = 0; i < nodes; i++) {
+		dev = NODE_PCI(i, 0);
+		htic = pci_read_config32(dev, HT_INIT_CONTROL);
+		htic &= ~HTIC_BIOSR_Detect;
+		pci_write_config32(dev, HT_INIT_CONTROL, htic);
+	}
+}
+
+void hard_reset(void)
+{
+	set_bios_reset();
+	/* Try rebooting through port 0xcf9 */
+	/* Actually it is not a real hard_reset --- it only reset coherent link table, but not reset link freq and width */
+	outb((0 << 3) | (0 << 2) | (1 << 1), 0xcf9);
+	outb((0 << 3) | (1 << 2) | (1 << 1), 0xcf9);
+}
+
+//SbReset();
+void soft_reset(void)
+{
+	set_bios_reset();
+	/* link reset */
+	outb(0x06, 0x0cf9);
+}