summaryrefslogtreecommitdiff
path: root/src/mainboard/amd
diff options
context:
space:
mode:
authorJens Rottmann <JRottmann@LiPPERTembedded.de>2013-02-18 20:26:50 +0100
committerPeter Stuge <peter@stuge.se>2013-02-18 22:49:59 +0100
commit384ee9f1429db8543724e868b7ffd5fc7e2aa915 (patch)
tree14ee510e9099a9469ca5a4bb56f3fe4e8c81e915 /src/mainboard/amd
parent9fba303435be16d5eb66ef11ed52ad71cc00c459 (diff)
downloadcoreboot-384ee9f1429db8543724e868b7ffd5fc7e2aa915.tar.xz
Persimmon: drop useless DDR3 voltage code copied from Inagua
Inagua can use GPIOs 178,179 to switch VMEM to 1.5, 1.35 or 1.25 V, which it does according to data read from the SO-DIMM's SPD EEPROM. On Persimmon (according to DB-FT1 rev. D schematics) both GPIOs are unconnected, there is no way to change the 1.5 V DDR3 voltage (save unsoldering a resistor). The whole code copied over from Inagua is useless. Removed the code, instead a comment hints at Inagua, for people who do designs based on Persimmon but do have a way to change VMEM. The line ...->DDR3Voltage = VOLT1_5; is supposed to make the AGESA DDR3 code select the RAM timings for the actually supplied voltage instead of the hoped-for but unavailable lower voltage. I have no idea how to test this, but in any case it can't hurt. Change-Id: Id098e09418b665645814a6ee2d41a3bff72238ba Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2448 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
Diffstat (limited to 'src/mainboard/amd')
-rw-r--r--src/mainboard/amd/persimmon/BiosCallOuts.c82
1 files changed, 4 insertions, 78 deletions
diff --git a/src/mainboard/amd/persimmon/BiosCallOuts.c b/src/mainboard/amd/persimmon/BiosCallOuts.c
index 0711d96f17..4db6e753ee 100644
--- a/src/mainboard/amd/persimmon/BiosCallOuts.c
+++ b/src/mainboard/amd/persimmon/BiosCallOuts.c
@@ -445,84 +445,10 @@ AGESA_STATUS BiosHookBeforeDQSTraining (UINT32 Func, UINT32 Data, VOID *ConfigPt
/* Call the host environment interface to provide a user hook opportunity. */
AGESA_STATUS BiosHookBeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
- AGESA_STATUS Status;
- UINTN FcnData;
- MEM_DATA_STRUCT *MemData;
- UINT32 AcpiMmioAddr;
- UINT32 GpioMmioAddr;
- UINT8 Data8;
- UINT16 Data16;
- UINT8 TempData8;
-
- FcnData = Data;
- MemData = ConfigPtr;
-
- Status = AGESA_SUCCESS;
- /* Get SB MMIO Base (AcpiMmioAddr) */
- WriteIo8 (0xCD6, 0x27);
- Data8 = ReadIo8(0xCD7);
- Data16 = Data8<<8;
- WriteIo8 (0xCD6, 0x26);
- Data8 = ReadIo8(0xCD7);
- Data16 |= Data8;
- AcpiMmioAddr = (UINT32)Data16 << 16;
- GpioMmioAddr = AcpiMmioAddr + GPIO_BASE;
-
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178);
- Data8 &= ~BIT5;
- TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
- TempData8 &= 0x03;
- TempData8 |= Data8;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8);
-
- Data8 |= BIT2+BIT3;
- Data8 &= ~BIT4;
- TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
- TempData8 &= 0x23;
- TempData8 |= Data8;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8);
-
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179);
- Data8 &= ~BIT5;
- TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
- TempData8 &= 0x03;
- TempData8 |= Data8;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8);
-
- Data8 |= BIT2+BIT3;
- Data8 &= ~BIT4;
- TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
- TempData8 &= 0x23;
- TempData8 |= Data8;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8);
-
- switch(MemData->ParameterListPtr->DDR3Voltage){
- case VOLT1_35:
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
- Data8 |= (UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
- break;
- case VOLT1_25:
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
- break;
- case VOLT1_5:
- default:
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
- Data8 |= (UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
- }
- return Status;
+ // Unlike e.g. AMD Inagua, Persimmon is unable to vary the RAM voltage.
+ // Make sure the right speed settings are selected.
+ ((MEM_DATA_STRUCT*)ConfigPtr)->ParameterListPtr->DDR3Voltage = VOLT1_5;
+ return AGESA_SUCCESS;
}
/* Call the host environment interface to provide a user hook opportunity. */