summaryrefslogtreecommitdiff
path: root/src/mainboard/amd
diff options
context:
space:
mode:
authorMike Loptien <mike.loptien@se-eng.com>2014-06-06 15:16:29 -0600
committerMike Loptien <mike.loptien@se-eng.com>2014-06-11 17:07:50 +0200
commitc93a75a5ab067f86104028b74d92fc54cb939cd5 (patch)
tree8f91538cc2b45d7df3d049c443d66e8617c6a641 /src/mainboard/amd
parentce740c474c3590dcb0da184d7663adf1f1d78ea8 (diff)
downloadcoreboot-c93a75a5ab067f86104028b74d92fc54cb939cd5.tar.xz
AMD/CIMx: Add functions for AMD PCI IRQ routing
The PCI_INTR table is an Index/Data pair of I/O ports 0xC00 and 0xC01. This table is responsible for physically routing IRQs to the PIC and IOAPIC. The settings given in this table are chipset and mainboard dependent, so the table values will reside in the mainboard.c file. This allows for a system to uniquely set its IRQ routing. The function to write the PCI_INTR table resides in cimx_util.c because the indices into the table have the same definitions for all SBx00 FCH chipsets. The next piece is a function that will read the PCI_INTR table and program the INT_LINE and INT_PIN registers in PCI config space appropriately. This function will read a devices' INT_PIN register, which is always hardcoded to a value if it uses hardware interrupts. It then uses this value, along with the device and function numbers to determine an index into the PCI_INTR table. It will read the table and program the corresponding value into the PCI config space register 0x3C, INT_LINE. Finally, it will set this IRQ number to LEVEL_TRIGGERED on the PIC because it is a PCI device interrupt and the must be level triggered. For example, the SB800 USB EHCI device 0:18.2 has an INT_PIN value hardcoded to 2. This corresponds to PIN B. On the Persimmon mainboard, I want the USB device to use IRQ 11. I will program the PCI_INTR table at index 0x31 (this USB device index) to 11. This function will then read the INT_PIN register, read the PCI_INTR table, and then program the INT_LINE register with the value it read. It will then set the IRQ on the PIC to LEVEL_TRIGGERED by writing a 1 to I/O port 0x4D1 at bit position 4. Also, the SB700 has slightly different register definitions than the newer SB800 and SB900 so it needs its own set of #defines for the pci_intr registers. Only the Persimmon mainboard is adapted to this change as an example for other mainboards. Change-Id: I6de858289a17fa1e1abacf6328ea5099be74b1d6 Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/5877 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Diffstat (limited to 'src/mainboard/amd')
-rw-r--r--src/mainboard/amd/persimmon/mainboard.c104
1 files changed, 102 insertions, 2 deletions
diff --git a/src/mainboard/amd/persimmon/mainboard.c b/src/mainboard/amd/persimmon/mainboard.c
index b17bc6a0be..746b6c2772 100644
--- a/src/mainboard/amd/persimmon/mainboard.c
+++ b/src/mainboard/amd/persimmon/mainboard.c
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2011 Advanced Micro Devices, Inc.
+ * Copyright (C) 2014 Sage Electronic Engineering, LLC.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -23,16 +24,112 @@
#include <arch/io.h>
#include <cpu/x86/msr.h>
#include <device/pci_def.h>
-#include <southbridge/amd/sb800/sb800.h>
+#include <southbridge/amd/cimx/cimx_util.h>
#include <arch/acpi.h>
#include "BiosCallOuts.h"
#include <cpu/amd/agesa/s3_resume.h>
#include <cpu/amd/mtrr.h>
#include "SBPLATFORM.h"
+#include <southbridge/amd/cimx/sb800/pci_devs.h>
+#include <northbridge/amd/agesa/family14/pci_devs.h>
void set_pcie_reset(void);
void set_pcie_dereset(void);
+/***********************************************************
+ * These arrays set up the FCH PCI_INTR registers 0xC00/0xC01.
+ * This table is responsible for physically routing the PIC and
+ * IOAPIC IRQs to the different PCI devices on the system. It
+ * is read and written via registers 0xC00/0xC01 as an
+ * Index/Data pair. These values are chipset and mainboard
+ * dependent and should be updated accordingly.
+ *
+ * These values are used by the PCI configuration space,
+ * MP Tables. TODO: Make ACPI use these values too.
+ *
+ * The Persimmon PCI INTA/B/C/D pins are connected to
+ * FCH pins INTE/F/G/H on the schematic so these need
+ * to be routed as well.
+ */
+static const u8 mainboard_picr_data[FCH_INT_TABLE_SIZE] = {
+ /* INTA# - INTH# */
+ [0x00] = 0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,
+ /* Misc-nil,0,1,2, INT from Serial irq */
+ [0x08] = 0x00,0xF0,0x00,0x00,0x1F,0x1F,0x1F,0x1F,
+ /* SCI, SMBUS0, ASF, HDA, FC, GEC, PerfMon */
+ [0x10] = 0x1F,0x1F,0x1F,0x0A,0x1F,0x1F,0x1F,
+ /* IMC INT0 - 5 */
+ [0x20] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,
+ /* USB Devs 18/19/20/22 INTA-C */
+ [0x30] = 0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,0x0A,
+ /* IDE, SATA */
+ [0x40] = 0x0B,0x0B,
+ /* GPPInt0 - 3 */
+ [0x50] = 0x0A,0x0B,0x0A,0x0B
+};
+
+static const u8 mainboard_intr_data[FCH_INT_TABLE_SIZE] = {
+ /* INTA# - INTH# */
+ [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,
+ /* Misc-nil,0,1,2, INT from Serial irq */
+ [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F,
+ /* SCI, SMBUS0, ASF, HDA, FC, GEC, PerMon */
+ [0x10] = 0x09,0x1F,0x1F,0x10,0x1F,0x12,0x1F,
+ /* IMC INT0 - 5 */
+ [0x20] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,
+ /* USB Devs 18/19/22/20 INTA-C */
+ [0x30] = 0x12,0x11,0x12,0x11,0x12,0x11,0x12,
+ /* IDE, SATA */
+ [0x40] = 0x11,0x13,
+ /* GPPInt0 - 3 */
+ [0x50] = 0x10,0x11,0x12,0x13
+};
+
+/*
+ * This table defines the index into the picr/intr_data
+ * tables for each device. Any enabled device and slot
+ * that uses hardware interrupts should have an entry
+ * in this table to define its index into the FCH
+ * PCI_INTR register 0xC00/0xC01. This index will define
+ * the interrupt that it should use. Putting PIRQ_A into
+ * the PIN A index for a device will tell that device to
+ * use PIC IRQ 10 if it uses PIN A for its hardware INT.
+ */
+/*
+ * Persimmon has PCI slot INTA/B/C/D connected to PIRQE/F/G/H
+ * but because PCI INT_PIN swizzling isnt implemented to match
+ * the IDSEL (dev 3) of the slot, the table is adjusted for the
+ * swizzle and INTA is connected to PIRQH so PINA/B/C/D on
+ * off-chip devices should get mapped to PIRQH/E/F/G.
+ */
+static const struct pirq_struct mainboard_pirq_data[] = {
+ /* {PCI_devfn, {PIN A, PIN B, PIN C, PIN D}}, */
+ {GFX_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_NC, PIRQ_NC}}, /* VGA: 01.0 */
+ {NB_PCIE_PORT1_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* NIC: 04.0 */
+ {NB_PCIE_PORT3_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* PCIe bdg:06.0 */
+ {SATA_DEVFN, {PIRQ_SATA, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SATA: 11.0 */
+ {OHCI1_DEVFN, {PIRQ_OHCI1, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI1: 12.0 */
+ {EHCI1_DEVFN, {PIRQ_NC, PIRQ_EHCI1, PIRQ_NC, PIRQ_NC}}, /* EHCI1: 12.2 */
+ {OHCI2_DEVFN, {PIRQ_OHCI2, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI2: 13.0 */
+ {EHCI2_DEVFN, {PIRQ_NC, PIRQ_EHCI2, PIRQ_NC, PIRQ_NC}}, /* EHCI2: 13.2 */
+ {SMBUS_DEVFN, {PIRQ_SMBUS, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SMBUS: 14.0 */
+ {IDE_DEVFN, {PIRQ_NC, PIRQ_IDE, PIRQ_NC, PIRQ_NC}}, /* IDE: 14.1 */
+ {HDA_DEVFN, {PIRQ_HDA, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* HDA: 14.2 */
+ {SB_PCI_PORT_DEVFN, {PIRQ_H, PIRQ_E, PIRQ_F, PIRQ_G}}, /* PCI bdg: 14.4 */
+ {OHCI4_DEVFN, {PIRQ_NC, PIRQ_NC, PIRQ_OHCI4, PIRQ_NC}}, /* OHCI4: 14.5 */
+ {OHCI3_DEVFN, {PIRQ_OHCI3, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI3: 16.0 */
+ {EHCI3_DEVFN, {PIRQ_NC, PIRQ_EHCI3, PIRQ_NC, PIRQ_NC}}, /* EHCI3: 16.2 */
+};
+
+/* PIRQ Setup */
+static void pirq_setup(void)
+{
+ pirq_data_ptr = mainboard_pirq_data;
+ pirq_data_size = sizeof(mainboard_pirq_data) / sizeof(struct pirq_struct);
+ intr_data_ptr = mainboard_intr_data;
+ picr_data_ptr = mainboard_picr_data;
+}
+
/**
* TODO
* SB CIMx callback
@@ -59,7 +156,7 @@ static void mainboard_enable(device_t dev)
/*
* The mainboard is the first place that we get control in ramstage. Check
- * for S3 resume and call the approriate AGESA/CIMx resume functions.
+ * for S3 resume and call the appropriate AGESA/CIMx resume functions.
*/
#if CONFIG_HAVE_ACPI_RESUME
acpi_slp_type = acpi_get_sleep_type();
@@ -82,6 +179,9 @@ static void mainboard_enable(device_t dev)
*/
pm_iowrite(0x29, 0x80);
pm_iowrite(0x28, 0x61);
+
+ /* Initialize the PIRQ data structures for consumption */
+ pirq_setup();
}
struct chip_operations mainboard_ops = {