summaryrefslogtreecommitdiff
path: root/src/mainboard/amd
diff options
context:
space:
mode:
authorWANG Siyuan <wangsiyuanbuaa@gmail.com>2013-12-02 10:48:26 +0800
committerRudolf Marek <r.marek@assembler.cz>2014-03-10 18:06:09 +0100
commitd5813530fa4d6d217c3e797ee4042a4b841da72c (patch)
treea542d2fa9f6b3c2080475197c09469de576d7365 /src/mainboard/amd
parent7841ece730ea42e9c432fad788b8c35f8ff716e2 (diff)
downloadcoreboot-d5813530fa4d6d217c3e797ee4042a4b841da72c.tar.xz
AMD Parmer: add IMC fan control
There are 3 steps to enable the IMC fan control: 1. Enable fan control related registers on Hudson using oem_fan_control(). 2. Set EcStruct. 3. Enable thermal zone using enable_imc_thermal_zone(). I have tested on Parmer. Change-Id: Id11d5c5da30346c034d155a73749e7f4c9c980eb Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com> Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/4302 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
Diffstat (limited to 'src/mainboard/amd')
-rw-r--r--src/mainboard/amd/parmer/BiosCallOuts.c128
-rw-r--r--src/mainboard/amd/parmer/get_bus_conf.c8
2 files changed, 40 insertions, 96 deletions
diff --git a/src/mainboard/amd/parmer/BiosCallOuts.c b/src/mainboard/amd/parmer/BiosCallOuts.c
index 5eaf4604f6..110c2c8565 100644
--- a/src/mainboard/amd/parmer/BiosCallOuts.c
+++ b/src/mainboard/amd/parmer/BiosCallOuts.c
@@ -25,6 +25,9 @@
#include "heapManager.h"
#include "FchPlatform.h"
#include "cbfs.h"
+#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
+#include "imc.h"
+#endif
STATIC CONST BIOS_CALLOUT_STRUCT BiosCallouts[] =
{
@@ -129,20 +132,11 @@ static const CODEC_TBL_LIST CodecTableList[] =
*/
static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
{
- FCH_HWM_FAN_CTR oem_factl[5] = {
- /*temperatuer input, fan mode, frequency, low_duty, med_duty, multiplier, lowtemp, medtemp, hightemp, LinearRange, LinearHoldCount */
- /* Parmer FanOUT0 Fan header J32 */
- {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0},
- /* Parmer FanOUT1 Fan header J31*/
- {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0},
- {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0},
- {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0},
- {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0},
- };
- LibAmdMemCopy ((VOID *)(FchParams->Hwm.HwmFanControl), &oem_factl, (sizeof (FCH_HWM_FAN_CTR) * 5), FchParams->StdHeader);
-
/* Enable IMC fan control. the recommand way */
-#if defined CONFIG_HUDSON_IMC_FWM && (CONFIG_HUDSON_IMC_FWM == 1)
+#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
+
+ imc_reg_init();
+
/* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
FchParams->Hwm.HwMonitorEnable = TRUE;
FchParams->Hwm.HwmFchtsiAutoPoll = FALSE;/* 0 disable, 1 enable TSI Auto Polling */
@@ -156,100 +150,42 @@ static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
/* Thermal Zone Parameter */
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x00; //BIT0 | BIT2 | BIT5;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x00;//6 | BIT3;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d; //BIT0 | BIT2 | BIT5;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x0e;//6 | BIT3;
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x54;
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 2;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x02;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01; /* PWM steping rate in unit of PWM level percentage */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00;
/* IMC Fan Policy temperature thresholds */
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0;///80; /*AC0 threshold in Celsius */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0; /*AC1 threshold in Celsius */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0; /*AC2 threshold in Celsius */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0; /*AC3 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0; /*AC4 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0; /*AC5 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0; /*AC6 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0; /*AC7 lowest threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0; /*critical threshold* in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0x46;///80; /*AC0 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0x3c; /*AC1 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0x32; /*AC2 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff; /*AC3 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff; /*AC4 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff; /*AC5 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff; /*AC6 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff; /*AC7 lowest threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b; /*critical threshold* in Celsius, 0xFF is not define */
FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;
/* IMC Fan Policy PWM Settings */
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0; /* AL0 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0; /* AL1 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0; /* AL2 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0x00; /* AL3 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0x00; /* AL4 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0x00; /* AL5 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0x00; /* AL6 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0x00; /* AL7 percentage */
-
- FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg0 = 0x00;
- FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg1 = 0x01; /* Zone */
- FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg2 = 0x55;//BIT0 | BIT2 | BIT5;
- FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg3 = 0x17;
- FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg4 = 0x00;
- FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg5 = 0x00;
- FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg6 = 0x90; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
- FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg7 = 0;
- FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
- FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg9 = 0;
-
- FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg0 = 0x00;
- FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg1 = 0x01; /* zone */
- FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg2 = 60; /*AC0 threshold in Celsius */
- FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg3 = 40; /*AC1 threshold in Celsius */
- FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg4 = 0; /*AC2 threshold in Celsius */
- FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg5 = 0; /*AC3 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg6 = 0; /*AC4 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg7 = 0; /*AC5 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg8 = 0; /*AC6 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg9 = 0; /*AC7 lowest threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegA = 0; /*critical threshold* in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegB = 0x00;
-
- FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg0 = 0x00;
- FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg1 = 0x01; /*Zone */
- FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg2 = 0; /* AL0 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg3 = 0; /* AL1 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg4 = 0; /* AL2 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg5 = 0x00; /* AL3 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg6 = 0x00; /* AL4 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg7 = 0x00; /* AL5 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg8 = 0x00; /* AL6 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg9 = 0x00; /* AL7 percentage */
-
- FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg0 = 0x00;
- FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg1 = 0x2; /* Zone */
- FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg2 = 0x0;//BIT0 | BIT2 | BIT5;
- FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg3 = 0x0;
- FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg4 = 0x00;
- FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg5 = 0x00;
- FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
- FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg7 = 2;
- FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg8 = 5; /* PWM steping rate in unit of PWM level percentage */
- FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg9 = 0;
-
- FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg0 = 0x00;
- FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg1 = 0x3; /* Zone */
- FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg2 = 0x0;//BIT0 | BIT2 | BIT5;
- FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg3 = 0x0;
- FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg4 = 0x00;
- FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg5 = 0x00;
- FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg6 = 0x0; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
- FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg7 = 0;
- FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
- FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg9 = 0;
-
- /* IMC Function */
- FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x333;//BIT0 | BIT4 |BIT8;
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0x5a; /* AL0 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0x46; /* AL1 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0x28; /* AL2 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff; /* AL3 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff; /* AL4 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff; /* AL5 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff; /* AL6 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff; /* AL7 percentage */
+
+ FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x111;//BIT0 | BIT4 |BIT8;
/* NOTE:
* FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege,
diff --git a/src/mainboard/amd/parmer/get_bus_conf.c b/src/mainboard/amd/parmer/get_bus_conf.c
index c92fea95ed..bf76fe2fe7 100644
--- a/src/mainboard/amd/parmer/get_bus_conf.c
+++ b/src/mainboard/amd/parmer/get_bus_conf.c
@@ -25,6 +25,9 @@
#include <stdlib.h>
#include <cpu/amd/amdfam14.h>
#include "agesawrapper.h"
+#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
+#include "imc.h"
+#endif
/* Global variables for MB layouts and these will be shared by irqtable mptable
* and acpi_tables busnum is default.
@@ -134,4 +137,9 @@ void get_bus_conf(void)
bus_isa = 10;
apicid_base = CONFIG_MAX_CPUS;
apicid_hudson = apicid_base;
+
+#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
+ /* AMD AGESA does not enable thermal zone, so we enable it here. */
+ enable_imc_thermal_zone();
+#endif
}