There are more than a dozen targets in the v2 tree which refer to ROMCC

in their Config.lb but never use it. There's no point in keeping
dead code around.

This patch removes ROMCC remainders from Config.lb and kills orphaned
auto.c and failover.c in the affected mainboard directories.

arima/hdama
ibm/e325
ibm/e326
iwill/dk8s2
iwill/dk8x
msi/ms9282
newisys/khepri
sunw/ultra40
tyan/s2891
tyan/s2892
tyan/s2895
tyan/s4880
tyan/s4882

Abuild log is completely identical with and without the patch.

With this patch, the last ROMCC remainders for K8 boards are gone.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> 


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4055 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 0 insertions, 179 deletions

diff --git a/src/mainboard/arima/hdama/auto.c b/src/mainboard/arima/hdama/auto.c
index f1046a24fa..e69de29bb2 100644
--- a/src/mainboard/arima/hdama/auto.c
+++ b/src/mainboard/arima/hdama/auto.c
@@ -1,179 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <arch/cpu.h>
-#include <stdlib.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-#include <cpu/amd/model_fxx_rev.h>
-#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "superio/nsc/pc87360/pc87360_early_serial.c"
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-
-#define SERIAL_DEV PNP_DEV(0x2e, PC87360_SP1)
-
-/* Look up a which bus a given node/link combination is on.
- * return 0 when we can't find the answer.
- */
-
-static void hard_reset(void)
-{
-	device_t dev;
-
-	/* Find the device */
-	dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 3);
-	
-	/* enable cf9 */
-	pci_write_config8(dev, 0x41, 0xf1);
-
-	/* reset */
-	set_bios_reset();
-	outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
-	device_t dev;
-	
-	/* Find the device */
-	dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 0);
-
-	/* Reset */
-	set_bios_reset();
-	pci_write_config8(dev, 0x47, 1);
-}
-
-/*
- * GPIO28 of 8111 will control H0_MEMRESET_L
- * GPIO29 of 8111 will control H1_MEMRESET_L
- */
-static void memreset_setup(void)
-{
-	if (is_cpu_pre_c0()) {
-		/* Set the memreset low */
-		outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 28);
-		/* Ensure the BIOS has control of the memory lines */
-		outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 29);
-	}
-	else {
-		/* Ensure the CPU has controll of the memory lines */
-		outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 29);
-	}
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-	if (is_cpu_pre_c0()) {
-		udelay(800);
-		/* Set memreset_high */
-		outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 28);
-		udelay(90);
-	}
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-	/* nothing to do */
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
-	return smbus_read_byte(device, address);
-}
-
-#include "northbridge/amd/amdk8/raminit.c"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "sdram/generic_sdram.c"
-#include "cpu/amd/dualcore/dualcore.c"
-#include "northbridge/amd/amdk8/resourcemap.c"
-#include "debug.c"
-
-#define FIRST_CPU  1
-#define SECOND_CPU 1
-#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
-
-
-static void main(unsigned long bist)
-{
-	static const struct mem_controller cpu[] = {
-#if FIRST_CPU
-		{
-			.node_id = 0,
-			.f0 = PCI_DEV(0, 0x18, 0),
-			.f1 = PCI_DEV(0, 0x18, 1),
-			.f2 = PCI_DEV(0, 0x18, 2),
-			.f3 = PCI_DEV(0, 0x18, 3),
-			.channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 },
-			.channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 },
-		},
-#endif
-#if SECOND_CPU
-		{
-			.node_id = 1,
-			.f0 = PCI_DEV(0, 0x19, 0),
-			.f1 = PCI_DEV(0, 0x19, 1),
-			.f2 = PCI_DEV(0, 0x19, 2),
-			.f3 = PCI_DEV(0, 0x19, 3),
-			.channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 },
-			.channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 },
-		},
-#endif
-	};
-
-	int needs_reset;
-	if (bist == 0) {
-		k8_init_and_stop_secondaries();
-	}
-	/* Setup the console */
-	pc87360_enable_serial(SERIAL_DEV, TTYS0_BASE);
-	uart_init();
-	console_init();
-
-	/* Halt if there was a built in self test failure */
-	report_bist_failure(bist);
-
-	setup_default_resource_map();
-	needs_reset = setup_coherent_ht_domain();
-	needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80);
-	if (needs_reset) {
-		print_info("ht reset -\r\n");
-		soft_reset();
-	}
-#if 0
-	print_pci_devices();
-#endif
-	enable_smbus();
-#if 0
-	dump_spd_registers(ARRAY_SIZE(cpu), cpu);
-#endif
-
-	memreset_setup();
-	sdram_initialize(ARRAY_SIZE(cpu), cpu);
-	
-#if 0
-	dump_pci_devices();
-#endif
-#if 0
-	dump_pci_device(PCI_DEV(0, 0x18, 2));
-	dump_pci_device(PCI_DEV(0, 0x18, 3));
-#endif
-
-#if 0
-	/* Check the first 1M */
-	ram_check(0x00000000, 0x000100000);
-#endif
-}