summaryrefslogtreecommitdiff
path: root/src/mainboard/arima
diff options
context:
space:
mode:
authorCarl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>2009-04-03 16:29:35 +0000
committerCarl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>2009-04-03 16:29:35 +0000
commitf7116c3bd08e27fba8f1fb1ea25cfb8c4b592c67 (patch)
tree6652f8b4b49c122736fe868f210610313008922c /src/mainboard/arima
parentf16fb73087e0810e8fa03a8feb665ad6f7066da4 (diff)
downloadcoreboot-f7116c3bd08e27fba8f1fb1ea25cfb8c4b592c67.tar.xz
There are more than a dozen targets in the v2 tree which refer to ROMCC
in their Config.lb but never use it. There's no point in keeping dead code around. This patch removes ROMCC remainders from Config.lb and kills orphaned auto.c and failover.c in the affected mainboard directories. arima/hdama ibm/e325 ibm/e326 iwill/dk8s2 iwill/dk8x msi/ms9282 newisys/khepri sunw/ultra40 tyan/s2891 tyan/s2892 tyan/s2895 tyan/s4880 tyan/s4882 Abuild log is completely identical with and without the patch. With this patch, the last ROMCC remainders for K8 boards are gone. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4055 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/mainboard/arima')
-rw-r--r--src/mainboard/arima/hdama/Config.lb56
-rw-r--r--src/mainboard/arima/hdama/auto.c179
-rw-r--r--src/mainboard/arima/hdama/failover.c67
3 files changed, 0 insertions, 302 deletions
diff --git a/src/mainboard/arima/hdama/Config.lb b/src/mainboard/arima/hdama/Config.lb
index f02fb92c81..175939c083 100644
--- a/src/mainboard/arima/hdama/Config.lb
+++ b/src/mainboard/arima/hdama/Config.lb
@@ -46,8 +46,6 @@ driver mainboard.o
if HAVE_MP_TABLE object mptable.o end
if HAVE_PIRQ_TABLE object irq_tables.o end
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
makerule ./auto.o
@@ -65,30 +63,6 @@ makerule ./auto.inc
end
end
-else
-##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
- depends "$(MAINBOARD)/failover.c ../romcc"
- action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
- action "../romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-
-end
##
## Build our 16 bit and 32 bit coreboot entry code
@@ -100,7 +74,6 @@ end
mainboardinit cpu/x86/32bit/entry32.inc
-if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
@@ -108,7 +81,6 @@ if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
-end
##
## Build our reset vector (This is where coreboot is entered)
@@ -121,24 +93,16 @@ else
ldscript /cpu/x86/32bit/reset32.lds
end
-if USE_DCACHE_RAM
-else
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-end
-
##
## Include an id string (For safe flashing)
##
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
-if USE_DCACHE_RAM
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
-end
###
### This is the early phase of coreboot startup
@@ -146,12 +110,7 @@ end
### failover to another image.
###
if USE_FALLBACK_IMAGE
-if USE_DCACHE_RAM
- ldscript /arch/i386/lib/failover.lds
-else
ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
end
###
@@ -161,27 +120,12 @@ end
##
## Setup RAM
##
-if USE_DCACHE_RAM
-
if CONFIG_USE_INIT
initobject auto.o
else
mainboardinit ./auto.inc
end
-else
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu/enable_fpu.inc
-mainboardinit cpu/x86/mmx/enable_mmx.inc
-mainboardinit cpu/x86/sse/enable_sse.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse/disable_sse.inc
-mainboardinit cpu/x86/mmx/disable_mmx.inc
-end
-
##
## Include the secondary Configuration files
##
diff --git a/src/mainboard/arima/hdama/auto.c b/src/mainboard/arima/hdama/auto.c
index f1046a24fa..e69de29bb2 100644
--- a/src/mainboard/arima/hdama/auto.c
+++ b/src/mainboard/arima/hdama/auto.c
@@ -1,179 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <arch/cpu.h>
-#include <stdlib.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-#include <cpu/amd/model_fxx_rev.h>
-#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "superio/nsc/pc87360/pc87360_early_serial.c"
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-
-#define SERIAL_DEV PNP_DEV(0x2e, PC87360_SP1)
-
-/* Look up a which bus a given node/link combination is on.
- * return 0 when we can't find the answer.
- */
-
-static void hard_reset(void)
-{
- device_t dev;
-
- /* Find the device */
- dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 3);
-
- /* enable cf9 */
- pci_write_config8(dev, 0x41, 0xf1);
-
- /* reset */
- set_bios_reset();
- outb(0x0e, 0x0cf9);
-}
-
-static void soft_reset(void)
-{
- device_t dev;
-
- /* Find the device */
- dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 0);
-
- /* Reset */
- set_bios_reset();
- pci_write_config8(dev, 0x47, 1);
-}
-
-/*
- * GPIO28 of 8111 will control H0_MEMRESET_L
- * GPIO29 of 8111 will control H1_MEMRESET_L
- */
-static void memreset_setup(void)
-{
- if (is_cpu_pre_c0()) {
- /* Set the memreset low */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 28);
- /* Ensure the BIOS has control of the memory lines */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 29);
- }
- else {
- /* Ensure the CPU has controll of the memory lines */
- outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 29);
- }
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
- if (is_cpu_pre_c0()) {
- udelay(800);
- /* Set memreset_high */
- outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 28);
- udelay(90);
- }
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
- return smbus_read_byte(device, address);
-}
-
-#include "northbridge/amd/amdk8/raminit.c"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "sdram/generic_sdram.c"
-#include "cpu/amd/dualcore/dualcore.c"
-#include "northbridge/amd/amdk8/resourcemap.c"
-#include "debug.c"
-
-#define FIRST_CPU 1
-#define SECOND_CPU 1
-#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
-
-
-static void main(unsigned long bist)
-{
- static const struct mem_controller cpu[] = {
-#if FIRST_CPU
- {
- .node_id = 0,
- .f0 = PCI_DEV(0, 0x18, 0),
- .f1 = PCI_DEV(0, 0x18, 1),
- .f2 = PCI_DEV(0, 0x18, 2),
- .f3 = PCI_DEV(0, 0x18, 3),
- .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 },
- .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 },
- },
-#endif
-#if SECOND_CPU
- {
- .node_id = 1,
- .f0 = PCI_DEV(0, 0x19, 0),
- .f1 = PCI_DEV(0, 0x19, 1),
- .f2 = PCI_DEV(0, 0x19, 2),
- .f3 = PCI_DEV(0, 0x19, 3),
- .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 },
- .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 },
- },
-#endif
- };
-
- int needs_reset;
- if (bist == 0) {
- k8_init_and_stop_secondaries();
- }
- /* Setup the console */
- pc87360_enable_serial(SERIAL_DEV, TTYS0_BASE);
- uart_init();
- console_init();
-
- /* Halt if there was a built in self test failure */
- report_bist_failure(bist);
-
- setup_default_resource_map();
- needs_reset = setup_coherent_ht_domain();
- needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80);
- if (needs_reset) {
- print_info("ht reset -\r\n");
- soft_reset();
- }
-#if 0
- print_pci_devices();
-#endif
- enable_smbus();
-#if 0
- dump_spd_registers(ARRAY_SIZE(cpu), cpu);
-#endif
-
- memreset_setup();
- sdram_initialize(ARRAY_SIZE(cpu), cpu);
-
-#if 0
- dump_pci_devices();
-#endif
-#if 0
- dump_pci_device(PCI_DEV(0, 0x18, 2));
- dump_pci_device(PCI_DEV(0, 0x18, 3));
-#endif
-
-#if 0
- /* Check the first 1M */
- ram_check(0x00000000, 0x000100000);
-#endif
-}
diff --git a/src/mainboard/arima/hdama/failover.c b/src/mainboard/arima/hdama/failover.c
index a8d22e9cf0..e69de29bb2 100644
--- a/src/mainboard/arima/hdama/failover.c
+++ b/src/mainboard/arima/hdama/failover.c
@@ -1,67 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
-#include "northbridge/amd/amdk8/early_ht.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-
-static unsigned long main(unsigned long bist)
-{
- unsigned nodeid;
-
- /* Make cerain my local apic is useable */
- enable_lapic();
-
- nodeid = lapicid() & 0xf;
-
- /* Is this a cpu only reset? */
- if (cpu_init_detected(nodeid)) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
- /* Is this a secondary cpu? */
- if (!boot_cpu()) {
- if (last_boot_normal()) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
- enumerate_ht_chain();
-
- /* Setup the 8111 */
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
- fallback_image:
- return bist;
-}