diff options
author | Angel Pons <th3fanbus@gmail.com> | 2020-07-26 20:54:09 +0200 |
---|---|---|
committer | Patrick Georgi <pgeorgi@google.com> | 2020-08-03 05:32:59 +0000 |
commit | e18cdf4d934a24fa0d549d2d2ba5b167cfd8462a (patch) | |
tree | 706d6ac06bfa7314f67a36d6956cdce541f6d003 /src/mainboard/asrock/h110m | |
parent | 9addda3c410041ea93ae5587d17460da9a9c312f (diff) | |
download | coreboot-e18cdf4d934a24fa0d549d2d2ba5b167cfd8462a.tar.xz |
mb/asrock/h110m: Relocate devicetree settings
Some settings are suspicious, and have been annotated with FIXMEs.
Tested with BUILD_TIMELESS=1, its coreboot.rom does not change.
Change-Id: I7755867cb92745f542a4261db5dd118ca905612b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43919
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Diffstat (limited to 'src/mainboard/asrock/h110m')
-rw-r--r-- | src/mainboard/asrock/h110m/devicetree.cb | 211 |
1 files changed, 97 insertions, 114 deletions
diff --git a/src/mainboard/asrock/h110m/devicetree.cb b/src/mainboard/asrock/h110m/devicetree.cb index fae925fcf9..68ef2a4044 100644 --- a/src/mainboard/asrock/h110m/devicetree.cb +++ b/src/mainboard/asrock/h110m/devicetree.cb @@ -18,9 +18,6 @@ chip soc/intel/skylake register "gpe0_dw1" = "GPP_D" register "gpe0_dw2" = "GPP_E" - # Set @0x280-0x2ff I/O Range for SuperIO HWM - register "gen1_dec" = "0x007c0281" - # Enable "Intel Speed Shift Technology" register "speed_shift_enable" = "1" @@ -28,19 +25,9 @@ chip soc/intel/skylake register "dptf_enable" = "1" # FSP Configuration - register "ScsEmmcHs400Enabled" = "0" - register "ScsSdCardEnabled" = "0" - register "HeciEnabled" = "0" - register "SkipExtGfxScan" = "0" register "PrimaryDisplay" = "Display_PEG" - register "Device4Enable" = "1" register "SaGv" = "SaGv_Enabled" register "PmTimerDisabled" = "0" - register "DspEnable" = "0" - register "PchHdaVcType" = "Vc1" - - # Set LPC Serial IRQ mode - register "serirq_mode" = "SERIRQ_CONTINUOUS" # Enabling SLP_S3#, SLP_S4#, SLP_SUS and SLP_A Stretch # SLP_S3 Minimum Assertion Width. Values 0: 60us, 1: 1ms, 2: 50ms, 3: 2s @@ -122,50 +109,6 @@ chip soc/intel/skylake .voltage_limit = 1520 \ }" - # USB - register "usb2_ports[0]" = "USB2_PORT_MID(OC0)" - register "usb2_ports[1]" = "USB2_PORT_MID(OC0)" - register "usb2_ports[2]" = "USB2_PORT_MID(OC4)" - register "usb2_ports[3]" = "USB2_PORT_MID(OC4)" - register "usb2_ports[4]" = "USB2_PORT_MID(OC2)" - register "usb2_ports[5]" = "USB2_PORT_MID(OC2)" - register "usb2_ports[6]" = "USB2_PORT_MID(OC0)" - register "usb2_ports[7]" = "USB2_PORT_MID(OC0)" - register "usb2_ports[8]" = "USB2_PORT_MID(OC0)" - register "usb2_ports[9]" = "USB2_PORT_MID(OC0)" - register "usb2_ports[10]" = "USB2_PORT_MID(OC1)" - register "usb2_ports[11]" = "USB2_PORT_MID(OC1)" - register "usb2_ports[12]" = "USB2_PORT_MID(OC_SKIP)" - register "usb2_ports[13]" = "USB2_PORT_MID(OC_SKIP)" - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)" - register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC3)" - register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)" - register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC1)" - register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC1)" - register "usb3_ports[6]" = "USB3_PORT_DEFAULT(OC_SKIP)" - register "usb3_ports[7]" = "USB3_PORT_DEFAULT(OC_SKIP)" - register "usb3_ports[8]" = "USB3_PORT_DEFAULT(OC_SKIP)" - register "usb3_ports[9]" = "USB3_PORT_DEFAULT(OC_SKIP)" - - # SATA - register "SataSalpSupport" = "1" - # SATA4 and SATA5 are located in the lower right corner of the board, - # but they are not populated. This is because the same PCB is used to - # make boards with better PCHs, which can have up to six SATA ports. - # However, the H110 PCH only has four SATA ports, which explains why - # two connectors are missing. - register "SataPortsEnable" = "{ \ - [0] = 1, \ - [1] = 1, \ - [2] = 1, \ - [3] = 1, \ - [4] = 0, \ - [5] = 0, \ - [6] = 0, \ - [7] = 0, \ - }" - # PCH UART, SPI, I2C register "SerialIoDevMode" = "{ \ [PchSerialIoIndexI2C0] = PchSerialIoDisabled, \ @@ -181,55 +124,6 @@ chip soc/intel/skylake [PchSerialIoIndexUart2] = PchSerialIoDisabled, \ }" - # Set params for PEG 0:1:0 - register "Peg0MaxLinkWidth" = "Peg0_x16" - # Configure PCIe clockgen in PCH - # PEG0 uses SRCCLKREQ0 and CLKSRC0 - register "PcieRpClkReqSupport[0]" = "1" - register "PcieRpClkReqNumber[0]" = "0" - register "PcieRpClkSrcNumber[0]" = "0" - - # Enable Root port 6(x1) for LAN. - register "PcieRpEnable[5]" = "1" - # Disable CLKREQ#, since onboard LAN is always present - register "PcieRpClkReqSupport[5]" = "0" - # Enable Advanced Error Reporting - register "PcieRpAdvancedErrorReporting[5]" = "1" - # Enable Latency Tolerance Reporting Mechanism - register "PcieRpLtrEnable[5]" = "1" - # Use CLK SRC 1 - register "PcieRpClkSrcNumber[5]" = "1" - - # Enable Root port 5 (x1) for PCIE slot. - register "PcieRpEnable[4]" = "1" - # Enable CLKREQ# - register "PcieRpClkReqSupport[4]" = "1" - # Use SRCCLKREQ2# - register "PcieRpClkReqNumber[4]" = "2" - # Enable Advanced Error Reporting - register "PcieRpAdvancedErrorReporting[4]" = "1" - # Enable Latency Tolerance Reporting Mechanism - register "PcieRpLtrEnable[4]" = "1" - # Use CLK SRC 2 - register "PcieRpClkSrcNumber[4]" = "2" - # Use Hot Plug subsystem - register "PcieRpHotPlug[4]" = "1" - - # Enable Root port 7(x1) for PCIE slot. - register "PcieRpEnable[6]" = "1" - # Enable CLKREQ# - register "PcieRpClkReqSupport[6]" = "1" - # Use SRCCLKREQ3# - register "PcieRpClkReqNumber[6]" = "3" - # Enable Advanced Error Reporting - register "PcieRpAdvancedErrorReporting[6]" = "1" - # Enable Latency Tolerance Reporting Mechanism - register "PcieRpLtrEnable[6]" = "1" - # Use CLK SRC 3 - register "PcieRpClkSrcNumber[6]" = "3" - # Use Hot Plug subsystem - register "PcieRpHotPlug[6]" = "1" - # PL2 override 91W register "power_limits_config" = "{ .tdp_pl2_override = 91, @@ -247,14 +141,49 @@ chip soc/intel/skylake end device pci 01.0 on # PEG subsystemid 0x1849 0x1901 + register "Peg0MaxLinkWidth" = "Peg0_x16" + register "SkipExtGfxScan" = "0" + + # Configure PCIe clockgen in PCH + register "PcieRpClkReqSupport[0]" = "1" + register "PcieRpClkReqNumber[0]" = "0" + register "PcieRpClkSrcNumber[0]" = "0" end device pci 02.0 on # Integrated Graphics Device subsystemid 0x1849 0x1912 end - device pci 04.0 on end # Thermal Subsystem + device pci 04.0 on # Thermal Subsystem + register "Device4Enable" = "1" + end device pci 08.0 off end # Gaussian Mixture Model device pci 14.0 on # USB xHCI subsystemid 0x1849 0xa131 + + register "usb2_ports[0]" = "USB2_PORT_MID(OC0)" + register "usb2_ports[1]" = "USB2_PORT_MID(OC0)" + register "usb2_ports[2]" = "USB2_PORT_MID(OC4)" + register "usb2_ports[3]" = "USB2_PORT_MID(OC4)" + register "usb2_ports[4]" = "USB2_PORT_MID(OC2)" + register "usb2_ports[5]" = "USB2_PORT_MID(OC2)" + register "usb2_ports[6]" = "USB2_PORT_MID(OC0)" + register "usb2_ports[7]" = "USB2_PORT_MID(OC0)" + register "usb2_ports[8]" = "USB2_PORT_MID(OC0)" + register "usb2_ports[9]" = "USB2_PORT_MID(OC0)" + register "usb2_ports[10]" = "USB2_PORT_MID(OC1)" + register "usb2_ports[11]" = "USB2_PORT_MID(OC1)" + register "usb2_ports[12]" = "USB2_PORT_MID(OC_SKIP)" + register "usb2_ports[13]" = "USB2_PORT_MID(OC_SKIP)" + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)" + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC3)" + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)" + register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC1)" + register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC1)" + register "usb3_ports[6]" = "USB3_PORT_DEFAULT(OC_SKIP)" + register "usb3_ports[7]" = "USB3_PORT_DEFAULT(OC_SKIP)" + register "usb3_ports[8]" = "USB3_PORT_DEFAULT(OC_SKIP)" + register "usb3_ports[9]" = "USB3_PORT_DEFAULT(OC_SKIP)" end device pci 14.1 off end # USB xDCI (OTG) device pci 14.2 on # Thermal Subsystem @@ -264,8 +193,11 @@ chip soc/intel/skylake device pci 15.1 off end # I2C #1 device pci 15.2 off end # I2C #2 device pci 15.3 off end # I2C #3 - device pci 16.0 on # Management Engine Interface 1 + device pci 16.0 on # Management Engine Interface 1 subsystemid 0x1849 0xa131 + + # FIXME: does not match devicetree! + register "HeciEnabled" = "0" end device pci 16.1 off end # Management Engine Interface 2 device pci 16.2 off end # Management Engine IDE-R @@ -273,6 +205,22 @@ chip soc/intel/skylake device pci 16.4 off end # Management Engine Interface 3 device pci 17.0 on # SATA subsystemid 0x1849 0xa102 + register "SataSalpSupport" = "1" + # SATA4 and SATA5 are located in the lower right corner of the board, + # but they are not populated. This is because the same PCB is used to + # make boards with better PCHs, which can have up to six SATA ports. + # However, the H110 PCH only has four SATA ports, which explains why + # two connectors are missing. + register "SataPortsEnable" = "{ \ + [0] = 1, \ + [1] = 1, \ + [2] = 1, \ + [3] = 1, \ + [4] = 0, \ + [5] = 0, \ + [6] = 0, \ + [7] = 0, \ + }" end device pci 19.0 off end # UART #2 device pci 19.1 off end # I2C #5 @@ -281,9 +229,33 @@ chip soc/intel/skylake device pci 1c.1 off end # PCI Express Port 2 device pci 1c.2 off end # PCI Express Port 3 device pci 1c.3 off end # PCI Express Port 4 - device pci 1c.4 on end # PCI Express Port 5 - device pci 1c.5 on end # PCI Express Port 6 - device pci 1c.6 on end # PCI Express Port 7 + device pci 1c.4 on # PCI Express Port 5 - PCIE slot + register "PcieRpEnable[4]" = "1" + register "PcieRpClkReqSupport[4]" = "1" + register "PcieRpClkReqNumber[4]" = "2" + register "PcieRpAdvancedErrorReporting[4]" = "1" + register "PcieRpLtrEnable[4]" = "1" + register "PcieRpClkSrcNumber[4]" = "2" + register "PcieRpHotPlug[4]" = "1" + end + device pci 1c.5 on # PCI Express Port 6 - Onboard LAN + register "PcieRpEnable[5]" = "1" + + # Disable CLKREQ#, since onboard LAN is always present + register "PcieRpClkReqSupport[5]" = "0" + register "PcieRpAdvancedErrorReporting[5]" = "1" + register "PcieRpLtrEnable[5]" = "1" + register "PcieRpClkSrcNumber[5]" = "1" + end + device pci 1c.6 on # PCI Express Port 7 - PCIE slot + register "PcieRpEnable[6]" = "1" + register "PcieRpClkReqSupport[6]" = "1" + register "PcieRpClkReqNumber[6]" = "3" + register "PcieRpAdvancedErrorReporting[6]" = "1" + register "PcieRpLtrEnable[6]" = "1" + register "PcieRpClkSrcNumber[6]" = "3" + register "PcieRpHotPlug[6]" = "1" + end device pci 1c.7 off end # PCI Express Port 8 device pci 1d.0 off end # PCI Express Port 9 device pci 1d.1 off end # PCI Express Port 10 @@ -295,10 +267,18 @@ chip soc/intel/skylake device pci 1e.3 off end # GSPI #1 device pci 1e.4 off end # eMMC device pci 1e.5 off end # SDIO - device pci 1e.6 off end # SDCard - device pci 1f.0 on # LPC bridge + device pci 1e.6 off # SDCard + register "ScsSdCardEnabled" = "0" + end + device pci 1f.0 on # LPC bridge subsystemid 0x1849 0x1a43 + # Set @0x280-0x2ff I/O Range for SuperIO HWM + register "gen1_dec" = "0x007c0281" + + # Set LPC Serial IRQ mode + register "serirq_mode" = "SERIRQ_CONTINUOUS" + chip superio/common device pnp 2e.0 on # passes SIO base addr to SSDT gen @@ -406,7 +386,10 @@ chip soc/intel/skylake end # LPC Interface device pci 1f.1 on end # P2SB device pci 1f.2 on end # Power Management Controller - device pci 1f.3 on end # Intel HDA + device pci 1f.3 on # Intel HDA + register "PchHdaVcType" = "Vc1" + register "DspEnable" = "0" + end device pci 1f.4 on end # SMBus device pci 1f.5 on end # PCH SPI device pci 1f.6 off end # GbE |