summaryrefslogtreecommitdiff
path: root/src/mainboard/asrock
diff options
context:
space:
mode:
authorAngel Pons <th3fanbus@gmail.com>2020-07-26 20:54:09 +0200
committerPatrick Georgi <pgeorgi@google.com>2020-08-03 05:32:59 +0000
commite18cdf4d934a24fa0d549d2d2ba5b167cfd8462a (patch)
tree706d6ac06bfa7314f67a36d6956cdce541f6d003 /src/mainboard/asrock
parent9addda3c410041ea93ae5587d17460da9a9c312f (diff)
downloadcoreboot-e18cdf4d934a24fa0d549d2d2ba5b167cfd8462a.tar.xz
mb/asrock/h110m: Relocate devicetree settings
Some settings are suspicious, and have been annotated with FIXMEs. Tested with BUILD_TIMELESS=1, its coreboot.rom does not change. Change-Id: I7755867cb92745f542a4261db5dd118ca905612b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43919 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Diffstat (limited to 'src/mainboard/asrock')
-rw-r--r--src/mainboard/asrock/h110m/devicetree.cb211
1 files changed, 97 insertions, 114 deletions
diff --git a/src/mainboard/asrock/h110m/devicetree.cb b/src/mainboard/asrock/h110m/devicetree.cb
index fae925fcf9..68ef2a4044 100644
--- a/src/mainboard/asrock/h110m/devicetree.cb
+++ b/src/mainboard/asrock/h110m/devicetree.cb
@@ -18,9 +18,6 @@ chip soc/intel/skylake
register "gpe0_dw1" = "GPP_D"
register "gpe0_dw2" = "GPP_E"
- # Set @0x280-0x2ff I/O Range for SuperIO HWM
- register "gen1_dec" = "0x007c0281"
-
# Enable "Intel Speed Shift Technology"
register "speed_shift_enable" = "1"
@@ -28,19 +25,9 @@ chip soc/intel/skylake
register "dptf_enable" = "1"
# FSP Configuration
- register "ScsEmmcHs400Enabled" = "0"
- register "ScsSdCardEnabled" = "0"
- register "HeciEnabled" = "0"
- register "SkipExtGfxScan" = "0"
register "PrimaryDisplay" = "Display_PEG"
- register "Device4Enable" = "1"
register "SaGv" = "SaGv_Enabled"
register "PmTimerDisabled" = "0"
- register "DspEnable" = "0"
- register "PchHdaVcType" = "Vc1"
-
- # Set LPC Serial IRQ mode
- register "serirq_mode" = "SERIRQ_CONTINUOUS"
# Enabling SLP_S3#, SLP_S4#, SLP_SUS and SLP_A Stretch
# SLP_S3 Minimum Assertion Width. Values 0: 60us, 1: 1ms, 2: 50ms, 3: 2s
@@ -122,50 +109,6 @@ chip soc/intel/skylake
.voltage_limit = 1520 \
}"
- # USB
- register "usb2_ports[0]" = "USB2_PORT_MID(OC0)"
- register "usb2_ports[1]" = "USB2_PORT_MID(OC0)"
- register "usb2_ports[2]" = "USB2_PORT_MID(OC4)"
- register "usb2_ports[3]" = "USB2_PORT_MID(OC4)"
- register "usb2_ports[4]" = "USB2_PORT_MID(OC2)"
- register "usb2_ports[5]" = "USB2_PORT_MID(OC2)"
- register "usb2_ports[6]" = "USB2_PORT_MID(OC0)"
- register "usb2_ports[7]" = "USB2_PORT_MID(OC0)"
- register "usb2_ports[8]" = "USB2_PORT_MID(OC0)"
- register "usb2_ports[9]" = "USB2_PORT_MID(OC0)"
- register "usb2_ports[10]" = "USB2_PORT_MID(OC1)"
- register "usb2_ports[11]" = "USB2_PORT_MID(OC1)"
- register "usb2_ports[12]" = "USB2_PORT_MID(OC_SKIP)"
- register "usb2_ports[13]" = "USB2_PORT_MID(OC_SKIP)"
- register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)"
- register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)"
- register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC3)"
- register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)"
- register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC1)"
- register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC1)"
- register "usb3_ports[6]" = "USB3_PORT_DEFAULT(OC_SKIP)"
- register "usb3_ports[7]" = "USB3_PORT_DEFAULT(OC_SKIP)"
- register "usb3_ports[8]" = "USB3_PORT_DEFAULT(OC_SKIP)"
- register "usb3_ports[9]" = "USB3_PORT_DEFAULT(OC_SKIP)"
-
- # SATA
- register "SataSalpSupport" = "1"
- # SATA4 and SATA5 are located in the lower right corner of the board,
- # but they are not populated. This is because the same PCB is used to
- # make boards with better PCHs, which can have up to six SATA ports.
- # However, the H110 PCH only has four SATA ports, which explains why
- # two connectors are missing.
- register "SataPortsEnable" = "{ \
- [0] = 1, \
- [1] = 1, \
- [2] = 1, \
- [3] = 1, \
- [4] = 0, \
- [5] = 0, \
- [6] = 0, \
- [7] = 0, \
- }"
-
# PCH UART, SPI, I2C
register "SerialIoDevMode" = "{ \
[PchSerialIoIndexI2C0] = PchSerialIoDisabled, \
@@ -181,55 +124,6 @@ chip soc/intel/skylake
[PchSerialIoIndexUart2] = PchSerialIoDisabled, \
}"
- # Set params for PEG 0:1:0
- register "Peg0MaxLinkWidth" = "Peg0_x16"
- # Configure PCIe clockgen in PCH
- # PEG0 uses SRCCLKREQ0 and CLKSRC0
- register "PcieRpClkReqSupport[0]" = "1"
- register "PcieRpClkReqNumber[0]" = "0"
- register "PcieRpClkSrcNumber[0]" = "0"
-
- # Enable Root port 6(x1) for LAN.
- register "PcieRpEnable[5]" = "1"
- # Disable CLKREQ#, since onboard LAN is always present
- register "PcieRpClkReqSupport[5]" = "0"
- # Enable Advanced Error Reporting
- register "PcieRpAdvancedErrorReporting[5]" = "1"
- # Enable Latency Tolerance Reporting Mechanism
- register "PcieRpLtrEnable[5]" = "1"
- # Use CLK SRC 1
- register "PcieRpClkSrcNumber[5]" = "1"
-
- # Enable Root port 5 (x1) for PCIE slot.
- register "PcieRpEnable[4]" = "1"
- # Enable CLKREQ#
- register "PcieRpClkReqSupport[4]" = "1"
- # Use SRCCLKREQ2#
- register "PcieRpClkReqNumber[4]" = "2"
- # Enable Advanced Error Reporting
- register "PcieRpAdvancedErrorReporting[4]" = "1"
- # Enable Latency Tolerance Reporting Mechanism
- register "PcieRpLtrEnable[4]" = "1"
- # Use CLK SRC 2
- register "PcieRpClkSrcNumber[4]" = "2"
- # Use Hot Plug subsystem
- register "PcieRpHotPlug[4]" = "1"
-
- # Enable Root port 7(x1) for PCIE slot.
- register "PcieRpEnable[6]" = "1"
- # Enable CLKREQ#
- register "PcieRpClkReqSupport[6]" = "1"
- # Use SRCCLKREQ3#
- register "PcieRpClkReqNumber[6]" = "3"
- # Enable Advanced Error Reporting
- register "PcieRpAdvancedErrorReporting[6]" = "1"
- # Enable Latency Tolerance Reporting Mechanism
- register "PcieRpLtrEnable[6]" = "1"
- # Use CLK SRC 3
- register "PcieRpClkSrcNumber[6]" = "3"
- # Use Hot Plug subsystem
- register "PcieRpHotPlug[6]" = "1"
-
# PL2 override 91W
register "power_limits_config" = "{
.tdp_pl2_override = 91,
@@ -247,14 +141,49 @@ chip soc/intel/skylake
end
device pci 01.0 on # PEG
subsystemid 0x1849 0x1901
+ register "Peg0MaxLinkWidth" = "Peg0_x16"
+ register "SkipExtGfxScan" = "0"
+
+ # Configure PCIe clockgen in PCH
+ register "PcieRpClkReqSupport[0]" = "1"
+ register "PcieRpClkReqNumber[0]" = "0"
+ register "PcieRpClkSrcNumber[0]" = "0"
end
device pci 02.0 on # Integrated Graphics Device
subsystemid 0x1849 0x1912
end
- device pci 04.0 on end # Thermal Subsystem
+ device pci 04.0 on # Thermal Subsystem
+ register "Device4Enable" = "1"
+ end
device pci 08.0 off end # Gaussian Mixture Model
device pci 14.0 on # USB xHCI
subsystemid 0x1849 0xa131
+
+ register "usb2_ports[0]" = "USB2_PORT_MID(OC0)"
+ register "usb2_ports[1]" = "USB2_PORT_MID(OC0)"
+ register "usb2_ports[2]" = "USB2_PORT_MID(OC4)"
+ register "usb2_ports[3]" = "USB2_PORT_MID(OC4)"
+ register "usb2_ports[4]" = "USB2_PORT_MID(OC2)"
+ register "usb2_ports[5]" = "USB2_PORT_MID(OC2)"
+ register "usb2_ports[6]" = "USB2_PORT_MID(OC0)"
+ register "usb2_ports[7]" = "USB2_PORT_MID(OC0)"
+ register "usb2_ports[8]" = "USB2_PORT_MID(OC0)"
+ register "usb2_ports[9]" = "USB2_PORT_MID(OC0)"
+ register "usb2_ports[10]" = "USB2_PORT_MID(OC1)"
+ register "usb2_ports[11]" = "USB2_PORT_MID(OC1)"
+ register "usb2_ports[12]" = "USB2_PORT_MID(OC_SKIP)"
+ register "usb2_ports[13]" = "USB2_PORT_MID(OC_SKIP)"
+
+ register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)"
+ register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)"
+ register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC3)"
+ register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)"
+ register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC1)"
+ register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC1)"
+ register "usb3_ports[6]" = "USB3_PORT_DEFAULT(OC_SKIP)"
+ register "usb3_ports[7]" = "USB3_PORT_DEFAULT(OC_SKIP)"
+ register "usb3_ports[8]" = "USB3_PORT_DEFAULT(OC_SKIP)"
+ register "usb3_ports[9]" = "USB3_PORT_DEFAULT(OC_SKIP)"
end
device pci 14.1 off end # USB xDCI (OTG)
device pci 14.2 on # Thermal Subsystem
@@ -264,8 +193,11 @@ chip soc/intel/skylake
device pci 15.1 off end # I2C #1
device pci 15.2 off end # I2C #2
device pci 15.3 off end # I2C #3
- device pci 16.0 on # Management Engine Interface 1
+ device pci 16.0 on # Management Engine Interface 1
subsystemid 0x1849 0xa131
+
+ # FIXME: does not match devicetree!
+ register "HeciEnabled" = "0"
end
device pci 16.1 off end # Management Engine Interface 2
device pci 16.2 off end # Management Engine IDE-R
@@ -273,6 +205,22 @@ chip soc/intel/skylake
device pci 16.4 off end # Management Engine Interface 3
device pci 17.0 on # SATA
subsystemid 0x1849 0xa102
+ register "SataSalpSupport" = "1"
+ # SATA4 and SATA5 are located in the lower right corner of the board,
+ # but they are not populated. This is because the same PCB is used to
+ # make boards with better PCHs, which can have up to six SATA ports.
+ # However, the H110 PCH only has four SATA ports, which explains why
+ # two connectors are missing.
+ register "SataPortsEnable" = "{ \
+ [0] = 1, \
+ [1] = 1, \
+ [2] = 1, \
+ [3] = 1, \
+ [4] = 0, \
+ [5] = 0, \
+ [6] = 0, \
+ [7] = 0, \
+ }"
end
device pci 19.0 off end # UART #2
device pci 19.1 off end # I2C #5
@@ -281,9 +229,33 @@ chip soc/intel/skylake
device pci 1c.1 off end # PCI Express Port 2
device pci 1c.2 off end # PCI Express Port 3
device pci 1c.3 off end # PCI Express Port 4
- device pci 1c.4 on end # PCI Express Port 5
- device pci 1c.5 on end # PCI Express Port 6
- device pci 1c.6 on end # PCI Express Port 7
+ device pci 1c.4 on # PCI Express Port 5 - PCIE slot
+ register "PcieRpEnable[4]" = "1"
+ register "PcieRpClkReqSupport[4]" = "1"
+ register "PcieRpClkReqNumber[4]" = "2"
+ register "PcieRpAdvancedErrorReporting[4]" = "1"
+ register "PcieRpLtrEnable[4]" = "1"
+ register "PcieRpClkSrcNumber[4]" = "2"
+ register "PcieRpHotPlug[4]" = "1"
+ end
+ device pci 1c.5 on # PCI Express Port 6 - Onboard LAN
+ register "PcieRpEnable[5]" = "1"
+
+ # Disable CLKREQ#, since onboard LAN is always present
+ register "PcieRpClkReqSupport[5]" = "0"
+ register "PcieRpAdvancedErrorReporting[5]" = "1"
+ register "PcieRpLtrEnable[5]" = "1"
+ register "PcieRpClkSrcNumber[5]" = "1"
+ end
+ device pci 1c.6 on # PCI Express Port 7 - PCIE slot
+ register "PcieRpEnable[6]" = "1"
+ register "PcieRpClkReqSupport[6]" = "1"
+ register "PcieRpClkReqNumber[6]" = "3"
+ register "PcieRpAdvancedErrorReporting[6]" = "1"
+ register "PcieRpLtrEnable[6]" = "1"
+ register "PcieRpClkSrcNumber[6]" = "3"
+ register "PcieRpHotPlug[6]" = "1"
+ end
device pci 1c.7 off end # PCI Express Port 8
device pci 1d.0 off end # PCI Express Port 9
device pci 1d.1 off end # PCI Express Port 10
@@ -295,10 +267,18 @@ chip soc/intel/skylake
device pci 1e.3 off end # GSPI #1
device pci 1e.4 off end # eMMC
device pci 1e.5 off end # SDIO
- device pci 1e.6 off end # SDCard
- device pci 1f.0 on # LPC bridge
+ device pci 1e.6 off # SDCard
+ register "ScsSdCardEnabled" = "0"
+ end
+ device pci 1f.0 on # LPC bridge
subsystemid 0x1849 0x1a43
+ # Set @0x280-0x2ff I/O Range for SuperIO HWM
+ register "gen1_dec" = "0x007c0281"
+
+ # Set LPC Serial IRQ mode
+ register "serirq_mode" = "SERIRQ_CONTINUOUS"
+
chip superio/common
device pnp 2e.0 on # passes SIO base addr to SSDT gen
@@ -406,7 +386,10 @@ chip soc/intel/skylake
end # LPC Interface
device pci 1f.1 on end # P2SB
device pci 1f.2 on end # Power Management Controller
- device pci 1f.3 on end # Intel HDA
+ device pci 1f.3 on # Intel HDA
+ register "PchHdaVcType" = "Vc1"
+ register "DspEnable" = "0"
+ end
device pci 1f.4 on end # SMBus
device pci 1f.5 on end # PCH SPI
device pci 1f.6 off end # GbE