diff options
| author | Felix Singer <felixsinger@posteo.net> | 2020-07-29 19:57:25 +0200 |
|---|---|---|
| committer | Michael Niewöhner <c0d3z3r0@review.coreboot.org> | 2020-07-29 20:45:29 +0000 |
| commit | 0901d03085e091a26fdc00da09a1e8e0b05adf86 (patch) | |
| tree | 8513085e64129afa84ad9a8f4c16e9e73eb92923 /src/mainboard/asrock | |
| parent | 3c0486913fea834336ebd6bf98f326aa4ba6e5c8 (diff) | |
| download | coreboot-0901d03085e091a26fdc00da09a1e8e0b05adf86.tar.xz | |
soc/intel/skylake: Enable SATA depending on devicetree configuration
Currently SATA gets enabled by the option EnableSata, but this
duplicates the devicetree on/off options. Therefore use the on/off
options for the enablement of the SATA controller.
I checked all corresponding mainboards if the devicetree configuration
matches the EnableSata setting.
Change-Id: I217dcb7178f29bbdeada54bdb774166126b47a5a
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43843
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
Diffstat (limited to 'src/mainboard/asrock')
| -rw-r--r-- | src/mainboard/asrock/h110m/devicetree.cb | 1 |
1 files changed, 0 insertions, 1 deletions
diff --git a/src/mainboard/asrock/h110m/devicetree.cb b/src/mainboard/asrock/h110m/devicetree.cb index 977fa2982d..c185b10143 100644 --- a/src/mainboard/asrock/h110m/devicetree.cb +++ b/src/mainboard/asrock/h110m/devicetree.cb @@ -154,7 +154,6 @@ chip soc/intel/skylake register "usb3_ports[9]" = "USB3_PORT_DEFAULT(OC_SKIP)" # SATA - register "EnableSata" = "1" register "SataSalpSupport" = "1" # SATA4 and SATA5 are located in the lower right corner of the board, # but they are not populated. This is because the same PCB is used to |