asus/f2a85-m: Switch away from AGESA_LEGACY

Change-Id: I7ba328c73f5fb44e50f00cb93db4f7ac8afbfdc2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18712
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>

1 files changed, 40 insertions, 99 deletions

diff --git a/src/mainboard/asus/f2a85-m/romstage.c b/src/mainboard/asus/f2a85-m/romstage.c
index 77024a01c3..3165dc5306 100644
--- a/src/mainboard/asus/f2a85-m/romstage.c
+++ b/src/mainboard/asus/f2a85-m/romstage.c
@@ -14,22 +14,10 @@
  * GNU General Public License for more details.
  */
 
-#include <northbridge/amd/agesa/agesawrapper.h>
-#include <northbridge/amd/agesa/agesa_helper.h>
-
-#include <arch/acpi.h>
-#include <arch/cpu.h>
 #include <arch/io.h>
-#include <arch/stages.h>
-#include <cbmem.h>
 #include <console/console.h>
-#include <cpu/amd/agesa/s3_resume.h>
-#include <cpu/amd/car.h>
-#include <cpu/x86/bist.h>
-#include <cpu/x86/lapic.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <device/pnp_def.h>
+
+#include <northbridge/amd/agesa/state_machine.h>
 #include <southbridge/amd/common/amd_defs.h>
 #include <southbridge/amd/agesa/hudson/hudson.h>
 #include <southbridge/amd/agesa/hudson/smbus.h>
@@ -76,98 +64,51 @@ static void superio_init_m_pro(void)
 	nuvoton_enable_serial(uart, CONFIG_TTYS0_BASE);
 }
 
-void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
+void board_BeforeAgesa(struct sysinfo *cb)
 {
-	u32 val;
 	u8 byte;
 	pci_devfn_t dev;
 
-	/* Must come first to enable PCI MMCONF. */
-	amd_initmmio();
-
 	if (IS_ENABLED(CONFIG_POST_DEVICE_PCI_PCIE))
 		hudson_pci_port80();
 	else if (IS_ENABLED(CONFIG_POST_DEVICE_LPC))
 		hudson_lpc_port80();
 
-	if (!cpu_init_detectedx && boot_cpu()) {
-
-		/* enable SIO LPC decode */
-		dev = PCI_DEV(0, 0x14, 3);
-		byte = pci_read_config8(dev, 0x48);
-		byte |= 3;		/* 2e, 2f */
-		pci_write_config8(dev, 0x48, byte);
-
-		/* enable serial decode */
-		byte = pci_read_config8(dev, 0x44);
-		byte |= (1 << 6);  /* 0x3f8 */
-		pci_write_config8(dev, 0x44, byte);
-
-		post_code(0x30);
-
-                /* enable SB MMIO space */
-		outb(0x24, 0xcd6);
-		outb(0x1, 0xcd7);
-
-		/* enable SIO clock */
-		sbxxx_enable_48mhzout();
-
-		if (IS_ENABLED(CONFIG_BOARD_ASUS_F2A85_M_PRO))
-			superio_init_m_pro();
-		else
-			superio_init_m();
-
-		console_init();
-
-		/* turn on secondary smbus at b20 */
-		outb(0x28, 0xcd6);
-		byte = inb(0xcd7);
-		byte |= 1;
-		outb(byte, 0xcd7);
-
-		/* set DDR3 voltage */
-		byte = CONFIG_BOARD_ASUS_F2A85_M_DDR3_VOLT_VAL;
-
-		/* default is byte = 0x0, so no need to set it in this case */
-		if (byte)
-			do_smbus_write_byte(0xb20, 0x15, 0x3, byte);
-	}
-
-	/* Halt if there was a built in self test failure */
-	post_code(0x34);
-	report_bist_failure(bist);
-
-	/* Load MPB */
-	val = cpuid_eax(1);
-	printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val);
-	printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx);
-
-	post_code(0x37);
-	agesawrapper_amdinitreset();
-	post_code(0x39);
-
-	agesawrapper_amdinitearly();
-	int s3resume = acpi_is_wakeup_s3();
-	if (!s3resume) {
-		post_code(0x40);
-		agesawrapper_amdinitpost();
-		post_code(0x41);
-		agesawrapper_amdinitenv();
-		disable_cache_as_ram();
-	} else {		/* S3 detect */
-		printk(BIOS_INFO, "S3 detected\n");
-
-		post_code(0x60);
-		agesawrapper_amdinitresume();
-		amd_initcpuio();
-		agesawrapper_amds3laterestore();
-
-		post_code(0x61);
-		prepare_for_resume();
-	}
-
-	post_code(0x50);
-	copy_and_run();
-
-	post_code(0x54);  /* Should never see this post code. */
+	/* enable SIO LPC decode */
+	dev = PCI_DEV(0, 0x14, 3);
+	byte = pci_read_config8(dev, 0x48);
+	byte |= 3;		/* 2e, 2f */
+	pci_write_config8(dev, 0x48, byte);
+
+	/* enable serial decode */
+	byte = pci_read_config8(dev, 0x44);
+	byte |= (1 << 6);  /* 0x3f8 */
+	pci_write_config8(dev, 0x44, byte);
+
+	post_code(0x30);
+
+	/* enable SB MMIO space */
+	outb(0x24, 0xcd6);
+	outb(0x1, 0xcd7);
+
+	/* enable SIO clock */
+	sbxxx_enable_48mhzout();
+
+	if (IS_ENABLED(CONFIG_BOARD_ASUS_F2A85_M_PRO))
+		superio_init_m_pro();
+	else
+		superio_init_m();
+
+	/* turn on secondary smbus at b20 */
+	outb(0x28, 0xcd6);
+	byte = inb(0xcd7);
+	byte |= 1;
+	outb(byte, 0xcd7);
+
+	/* set DDR3 voltage */
+	byte = CONFIG_BOARD_ASUS_F2A85_M_DDR3_VOLT_VAL;
+
+	/* default is byte = 0x0, so no need to set it in this case */
+	if (byte)
+		do_smbus_write_byte(0xb20, 0x15, 0x3, byte);
 }