Remove all AMD K8 boards

Platforms with LATE_CBMEM_INIT were agreed to be
removed with 4.7 release late 2017.

Change-Id: I0ecbb40f8c7ebdf68217f50af5624905d9005c64
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/26671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>

1 files changed, 0 insertions, 69 deletions

diff --git a/src/mainboard/asus/kfsn4-dre_k8/spd_notes.txt b/src/mainboard/asus/kfsn4-dre_k8/spd_notes.txt
deleted file mode 100644
index 9287a5f75a..0000000000
--- a/src/mainboard/asus/kfsn4-dre_k8/spd_notes.txt
+++ /dev/null
@@ -1,69 +0,0 @@
-====================================================================================================
-SPD mux
-====================================================================================================
-
-DIMM_A1 SDA signal traced to U6 pin 1
-Destructive testing of failed board (removal of U7 northbridge!) yielded the following information:
-U6 S0 <--> U7 W2
-U6 S1 <--> U7 W3
-
-Proprietary BIOS enables the SPD during POST with:
-S0: LOW
-S1: LOW
-
-then temporarily switches to:
-S0: LOW
-S1: HIGH
-
-then switches to runtime mode with:
-S0: HIGH
-S1: LOW
-
-After probing with a custom GPIO-flipping tool under Linux the following GPIO mappings were found:
-CK804 pin W2 <--> GPIO43
-CK804 pin W3 <--> GPIO44
-
-====================================================================================================
-W83793 (U46)
-====================================================================================================
-
-Sensor mappings:
-FRNT_FAN1: FAN3
-FRNT_FAN2: FAN4
-FRNT_FAN3: FAN5
-FRNT_FAN4: FAN6
-FRNT_FAN5: FAN9
-FRNT_FAN6: FAN10
-REAR_FAN1: FAN7
-REAR_FAN2: FAN8
-REAR_FAN3: FAN11
-REAR_FAN4: FAN12
-
-====================================================================================================
-Other hardware
-====================================================================================================
-
-Power LED (-) is connected to U15 (SuperIO) pin 64 via U4 pins 5,6 and a small MOSFET
-ID LED (-) is connected to a ??? via U4 pins 1,2,3,4 and U77 pins 5,6
-It appears that setting U15 (SuperIO) pin 88 LOW will override the ID LED and force it ON
-
-RECOVERY2 middle pin is connected to U15 (SuperIO) pin 89
-Normal is HIGH, recovery is LOW.
-
-PCIe slot WAKE# connects to U7 pin E23 (PCIE_WAKE#)
-
-CPU_WARN1 is driven by (???) via a simple buffer (U13 pin 10)
-MEM_WARN1 is driven by U7 pin AD3 (CPUVDD_EN) via a simple buffer (U101 pin 3)
-
-U7 pin AK3 is disconnected (routed to unpopulated capacitor/resistor)
-PU1 pin 37 (VDDPWRGD) drives U7 pin AJ4 (CPU_VLD)
-A small MOSFET directly above another small MOSFET directly above the right-hand edge of the PCIe slot drives U7 pin AK5 (HT_VLD)
-
-When > Barcelona CPU installed on PCB rev 1.04G:
-U7 pin AK4 (MEM_VLD): HIGH
-PU1 pin 37:           LOW
-U7 pin AK5:           LOW
-
-HyperTransport 1.2V supply appears to be generated by a linear regulator containing Q191 and downconverting the CK804 1.5V supply
-The enable pin appears to be tied to AUX_PANEL pin 1 (+5VSB) via a resistor
-Through two MOSFETs the HT supply enable pin is tied to U7 pin AE3 (HTVDD_EN)