mainboard/asus/p3b-f: Reintroduce as variant of p2b

Fold this last ASUS 440BX board into the P2B family, while bringing in
some changes:

- Devicetree becomes overridetree.
- Remove non-existent IR device and disable ACPI device on Super I/O to
  match OEM firmware.
- Add SB GPO settings from OEM firmware to devicetree. This disables
  the SPD enabling magic this board needs. By moving the enabling part
  to bootblock the hacky enable_spd hook can be eliminated.
- Initialize the serial port in bootblock, like the other boards.

Boot tested on hardware.

Change-Id: I65f2cb9d1bd4c82550de43889e3502526a46bd18
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41047
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

1 files changed, 37 insertions, 0 deletions

diff --git a/src/mainboard/asus/p2b/variants/p3b-f/romstage.c b/src/mainboard/asus/p2b/variants/p3b-f/romstage.c
new file mode 100644
index 0000000000..437a38fded
--- /dev/null
+++ b/src/mainboard/asus/p2b/variants/p3b-f/romstage.c
@@ -0,0 +1,37 @@
+/* This file is part of the coreboot project. */
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include <arch/io.h>
+#include <southbridge/intel/i82371eb/i82371eb.h>
+#include <northbridge/intel/i440bx/raminit.h>
+
+/*
+ * ASUS P3B-F specific SPD enable magic.
+ *
+ * Setting the byte at offset 0x37 in the PM I/O space to 0x6f will make the
+ * board DIMMs accessible at SMBus/SPD offsets 0x50-0x53. Per default the SPD
+ * offsets 0x50-0x53 are _not_ readable (all SPD reads will return 0xff) which
+ * will make RAM init fail.
+ *
+ * Tested values for PM I/O offset 0x37:
+ * 0x67: 11 00 111: Only SMBus/I2C offsets 0x48/0x49/0x2d accessible
+ * 0x6f: 11 01 111: Only SMBus/I2C offsets 0x50-0x53 (SPD) accessible
+ * 0x77: 11 10 111: Only SMBus/I2C offset 0x69 accessible
+ *
+ * PM I/O space offset 0x37 is GPOREG[31:24], i.e. it controls the GPIOs
+ * 24-30 of the PIIX4E (bit 31 is reserved). Thus, GPIOs 27 and 28
+ * control which SMBus/I2C offsets can be accessed.
+ */
+void enable_spd(void)
+{
+	outb(0x6f, PM_IO_BASE + 0x37);
+}
+
+/*
+ * Disable SPD access after RAM init to allow access to SMBus/I2C offsets
+ * 0x48/0x49/0x2d, which is required e.g. by lm-sensors.
+ */
+void disable_spd(void)
+{
+	outb(0x67, PM_IO_BASE + 0x37);
+}