mb/asus/p8h61-m_pro: Add new mainboard

Tested with GRUB 2.02 as a payload, booting Arch Linux as
well as Debian. This code is based on the output of autoport
as well as other mainboards supported in coreboot already.

Working:
 - Serial port I/O
 - S3 suspend/resume. Untested with SeaBIOS since it failed
   to resume on a similar board. It is likely to be due to
   low memory corruption, but I have not worked on it.
 - USB ports and headers
 - USB3 ports attached to the ASM1042 controller. SeaBIOS can
   boot from them, and it is likely GRUB can detect devices on
   those ports as well. The chip has a small SPI flash nearby,
   which seems to hold an Option ROM.
 - Gigabit Ethernet
 - Integrated graphics (libgfxinit)
 - VGA BIOS for integrated graphics init
 - PCIe x16 graphics
 - PCIe x1
 - SATA controller
 - Hardware Monitor
 - Fan Control (fancontrol on linux works well)
 - Native raminit
 - flashrom, using the internal programmer. Tested with coreboot,
   as well as with the vendor firmware.
 - NVRAM settings. Only debug_level has been tested.

Untested:
 - DVI port. It can detect a "fake" display, that is, an
   EEPROM connected to the DVI port. Thus, gma-mainboard.ads
   has been setup accordingly.
 - PS/2 port.
 - Audio: Only rear output (green) has been tested.
 - EHCI debug.
 - Parallel port header.
 - Non-Linux OSes
 - ACPI thermal zone and fan control (probably not working)

Not working:
 - Booting from devices attached to the ASM1061 controller.
   Devices on ports work fine once Linux has loaded.
 - Any SATA devices with Tianocore (payload issue)

Change-Id: I7e89ebe43a2e1ff0308f4876e98bbf2f5a0d85f2
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/26419
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

1 files changed, 196 insertions, 0 deletions

diff --git a/src/mainboard/asus/p8h61-m_pro/gpio.c b/src/mainboard/asus/p8h61-m_pro/gpio.c
new file mode 100644
index 0000000000..1cf848f0b1
--- /dev/null
+++ b/src/mainboard/asus/p8h61-m_pro/gpio.c
@@ -0,0 +1,196 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2018 Angel Pons <th3fanbus@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <southbridge/intel/common/gpio.h>
+
+static const struct pch_gpio_set1 pch_gpio_set1_mode = {
+	.gpio0 = GPIO_MODE_GPIO,
+	.gpio1 = GPIO_MODE_GPIO,
+	.gpio2 = GPIO_MODE_NATIVE,
+	.gpio3 = GPIO_MODE_NATIVE,
+	.gpio4 = GPIO_MODE_NATIVE,
+	.gpio5 = GPIO_MODE_NATIVE,
+	.gpio6 = GPIO_MODE_GPIO,
+	.gpio7 = GPIO_MODE_GPIO,
+	.gpio8 = GPIO_MODE_GPIO,
+	.gpio9 = GPIO_MODE_NATIVE,
+	.gpio10 = GPIO_MODE_GPIO,
+	.gpio11 = GPIO_MODE_NATIVE,
+	.gpio12 = GPIO_MODE_GPIO,
+	.gpio13 = GPIO_MODE_GPIO,
+	.gpio14 = GPIO_MODE_GPIO,
+	.gpio15 = GPIO_MODE_GPIO,
+	.gpio16 = GPIO_MODE_GPIO,
+	.gpio17 = GPIO_MODE_GPIO,
+	.gpio18 = GPIO_MODE_NATIVE,
+	.gpio19 = GPIO_MODE_NATIVE,
+	.gpio20 = GPIO_MODE_NATIVE,
+	.gpio21 = GPIO_MODE_NATIVE,
+	.gpio22 = GPIO_MODE_NATIVE,
+	.gpio23 = GPIO_MODE_NATIVE,
+	.gpio24 = GPIO_MODE_GPIO,
+	.gpio25 = GPIO_MODE_NATIVE,
+	.gpio26 = GPIO_MODE_NATIVE,
+	.gpio27 = GPIO_MODE_GPIO,
+	.gpio28 = GPIO_MODE_GPIO,
+	.gpio29 = GPIO_MODE_GPIO,
+	.gpio30 = GPIO_MODE_NATIVE,
+	.gpio31 = GPIO_MODE_GPIO,
+};
+
+static const struct pch_gpio_set1 pch_gpio_set1_direction = {
+	.gpio0 = GPIO_DIR_OUTPUT,
+	.gpio1 = GPIO_DIR_INPUT,
+	.gpio6 = GPIO_DIR_INPUT,
+	.gpio7 = GPIO_DIR_INPUT,
+	.gpio8 = GPIO_DIR_INPUT,
+	.gpio10 = GPIO_DIR_INPUT,
+	.gpio12 = GPIO_DIR_INPUT,
+	.gpio13 = GPIO_DIR_INPUT,
+	.gpio14 = GPIO_DIR_INPUT,
+	.gpio15 = GPIO_DIR_OUTPUT,
+	.gpio16 = GPIO_DIR_INPUT,
+	.gpio17 = GPIO_DIR_INPUT,
+	.gpio24 = GPIO_DIR_OUTPUT,
+	.gpio27 = GPIO_DIR_INPUT,
+	.gpio28 = GPIO_DIR_OUTPUT,
+	.gpio29 = GPIO_DIR_INPUT,
+	.gpio31 = GPIO_DIR_OUTPUT,
+};
+
+static const struct pch_gpio_set1 pch_gpio_set1_level = {
+	.gpio0 = GPIO_LEVEL_LOW,
+	.gpio15 = GPIO_LEVEL_LOW,
+	.gpio24 = GPIO_LEVEL_LOW,
+	.gpio28 = GPIO_LEVEL_LOW,
+	.gpio31 = GPIO_LEVEL_HIGH,
+};
+
+static const struct pch_gpio_set1 pch_gpio_set1_reset = {
+};
+
+static const struct pch_gpio_set1 pch_gpio_set1_invert = {
+	.gpio1 = GPIO_INVERT,
+	.gpio6 = GPIO_INVERT,
+	.gpio13 = GPIO_INVERT,
+};
+
+static const struct pch_gpio_set1 pch_gpio_set1_blink = {
+};
+
+static const struct pch_gpio_set2 pch_gpio_set2_mode = {
+	.gpio32 = GPIO_MODE_GPIO,
+	.gpio33 = GPIO_MODE_GPIO,
+	.gpio34 = GPIO_MODE_GPIO,
+	.gpio35 = GPIO_MODE_NATIVE,
+	.gpio36 = GPIO_MODE_NATIVE,
+	.gpio37 = GPIO_MODE_NATIVE,
+	.gpio38 = GPIO_MODE_NATIVE,
+	.gpio39 = GPIO_MODE_NATIVE,
+	.gpio40 = GPIO_MODE_NATIVE,
+	.gpio41 = GPIO_MODE_NATIVE,
+	.gpio42 = GPIO_MODE_GPIO,
+	.gpio43 = GPIO_MODE_NATIVE,
+	.gpio44 = GPIO_MODE_NATIVE,
+	.gpio45 = GPIO_MODE_NATIVE,
+	.gpio46 = GPIO_MODE_GPIO,
+	.gpio47 = GPIO_MODE_NATIVE,
+	.gpio48 = GPIO_MODE_NATIVE,
+	.gpio49 = GPIO_MODE_GPIO,
+	.gpio50 = GPIO_MODE_NATIVE,
+	.gpio51 = GPIO_MODE_NATIVE,
+	.gpio52 = GPIO_MODE_NATIVE,
+	.gpio53 = GPIO_MODE_NATIVE,
+	.gpio54 = GPIO_MODE_NATIVE,
+	.gpio55 = GPIO_MODE_NATIVE,
+	.gpio56 = GPIO_MODE_NATIVE,
+	.gpio57 = GPIO_MODE_GPIO,
+	.gpio58 = GPIO_MODE_NATIVE,
+	.gpio59 = GPIO_MODE_NATIVE,
+	.gpio60 = GPIO_MODE_NATIVE,
+	.gpio61 = GPIO_MODE_GPIO,
+	.gpio62 = GPIO_MODE_NATIVE,
+	.gpio63 = GPIO_MODE_NATIVE,
+};
+
+static const struct pch_gpio_set2 pch_gpio_set2_direction = {
+	.gpio32 = GPIO_DIR_OUTPUT,
+	.gpio33 = GPIO_DIR_OUTPUT,
+	.gpio34 = GPIO_DIR_INPUT,
+	.gpio42 = GPIO_DIR_INPUT,
+	.gpio46 = GPIO_DIR_INPUT,
+	.gpio49 = GPIO_DIR_INPUT,
+	.gpio57 = GPIO_DIR_INPUT,
+	.gpio61 = GPIO_DIR_OUTPUT,
+};
+
+static const struct pch_gpio_set2 pch_gpio_set2_level = {
+	.gpio32 = GPIO_LEVEL_HIGH,
+	.gpio33 = GPIO_LEVEL_HIGH,
+	.gpio61 = GPIO_LEVEL_HIGH,
+};
+
+static const struct pch_gpio_set2 pch_gpio_set2_reset = {
+};
+
+static const struct pch_gpio_set3 pch_gpio_set3_mode = {
+	.gpio64 = GPIO_MODE_NATIVE,
+	.gpio65 = GPIO_MODE_NATIVE,
+	.gpio66 = GPIO_MODE_NATIVE,
+	.gpio67 = GPIO_MODE_NATIVE,
+	.gpio68 = GPIO_MODE_GPIO,
+	.gpio69 = GPIO_MODE_GPIO,
+	.gpio70 = GPIO_MODE_NATIVE,
+	.gpio71 = GPIO_MODE_NATIVE,
+	.gpio72 = GPIO_MODE_GPIO,
+	.gpio73 = GPIO_MODE_NATIVE,
+	.gpio74 = GPIO_MODE_NATIVE,
+	.gpio75 = GPIO_MODE_NATIVE,
+};
+
+static const struct pch_gpio_set3 pch_gpio_set3_direction = {
+	.gpio68 = GPIO_DIR_INPUT,
+	.gpio69 = GPIO_DIR_INPUT,
+	.gpio72 = GPIO_DIR_INPUT,
+};
+
+static const struct pch_gpio_set3 pch_gpio_set3_level = {
+};
+
+static const struct pch_gpio_set3 pch_gpio_set3_reset = {
+};
+
+const struct pch_gpio_map mainboard_gpio_map = {
+	.set1 = {
+		.mode		= &pch_gpio_set1_mode,
+		.direction	= &pch_gpio_set1_direction,
+		.level		= &pch_gpio_set1_level,
+		.blink		= &pch_gpio_set1_blink,
+		.invert		= &pch_gpio_set1_invert,
+		.reset		= &pch_gpio_set1_reset,
+	},
+	.set2 = {
+		.mode		= &pch_gpio_set2_mode,
+		.direction	= &pch_gpio_set2_direction,
+		.level		= &pch_gpio_set2_level,
+		.reset		= &pch_gpio_set2_reset,
+	},
+	.set3 = {
+		.mode		= &pch_gpio_set3_mode,
+		.direction	= &pch_gpio_set3_direction,
+		.level		= &pch_gpio_set3_level,
+		.reset		= &pch_gpio_set3_reset,
+	},
+};