amdfam10 boards: Use defaults for get_pci1234()

Note that while these boards had entry 0x0ff0 in comparison
to 0x0ffc of the get_default_pci1234() initialisation, the
implementation of get_pci1234() unconditionally overrides
the first entry.

Change-Id: I8bec612f84fe3c3a0c21fc1e10629368857e9c5e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30649
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>

5 files changed, 5 insertions, 132 deletions

diff --git a/src/mainboard/asus/kcma-d8/get_bus_conf.c b/src/mainboard/asus/kcma-d8/get_bus_conf.c
index 03a8415cfc..3a9eb9e346 100644
--- a/src/mainboard/asus/kcma-d8/get_bus_conf.c
+++ b/src/mainboard/asus/kcma-d8/get_bus_conf.c
@@ -27,38 +27,12 @@
 */
 u32 apicid_sp5100;
 
-/*
-* Here you only need to set value in pci1234 for HT-IO that could be installed or not
-* You may need to preset pci1234 for HTIO board,
-* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
-*/
-u32 pci1234x[] = {
-	0x0000ff0,
-};
-
-/*
-* HT Chain device num, actually it is unit id base of every ht device in chain,
-* assume every chain only have 4 ht device at most
-*/
-u32 hcdnx[] = {
-	0x20202020,
-};
-
-
 
 void get_bus_conf(void)
 {
 	u32 apicid_base;
-	int i;
-
-	sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
-	for (i = 0; i < sysconf.hc_possible_num; i++) {
-		sysconf.pci1234[i] = pci1234x[i];
-		sysconf.hcdn[i] = hcdnx[i];
-	}
-
-	get_pci1234();
 
+	get_default_pci1234(1);
 	sysconf.sbdn = (sysconf.hcdn[0] & 0xff);
 
 	pirq_router_bus = (sysconf.pci1234[0] >> 16) & 0xff;
diff --git a/src/mainboard/asus/kgpe-d16/get_bus_conf.c b/src/mainboard/asus/kgpe-d16/get_bus_conf.c
index 03a8415cfc..903e7e1e31 100644
--- a/src/mainboard/asus/kgpe-d16/get_bus_conf.c
+++ b/src/mainboard/asus/kgpe-d16/get_bus_conf.c
@@ -27,37 +27,12 @@
 */
 u32 apicid_sp5100;
 
-/*
-* Here you only need to set value in pci1234 for HT-IO that could be installed or not
-* You may need to preset pci1234 for HTIO board,
-* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
-*/
-u32 pci1234x[] = {
-	0x0000ff0,
-};
-
-/*
-* HT Chain device num, actually it is unit id base of every ht device in chain,
-* assume every chain only have 4 ht device at most
-*/
-u32 hcdnx[] = {
-	0x20202020,
-};
-
-
 
 void get_bus_conf(void)
 {
 	u32 apicid_base;
-	int i;
-
-	sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
-	for (i = 0; i < sysconf.hc_possible_num; i++) {
-		sysconf.pci1234[i] = pci1234x[i];
-		sysconf.hcdn[i] = hcdnx[i];
-	}
 
-	get_pci1234();
+	get_default_pci1234(1);
 
 	sysconf.sbdn = (sysconf.hcdn[0] & 0xff);
 
diff --git a/src/mainboard/asus/m4a78-em/get_bus_conf.c b/src/mainboard/asus/m4a78-em/get_bus_conf.c
index 88b7bf115e..ade9c79e00 100644
--- a/src/mainboard/asus/m4a78-em/get_bus_conf.c
+++ b/src/mainboard/asus/m4a78-em/get_bus_conf.c
@@ -26,36 +26,11 @@
 */
 u32 apicid_sb700;
 
-/*
-* Here you only need to set value in pci1234 for HT-IO that could be installed or not
-* You may need to preset pci1234 for HTIO board,
-* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
-*/
-u32 pci1234x[] = {
-	0x0000ff0,
-};
-
-/*
-* HT Chain device num, actually it is unit id base of every ht device in chain,
-* assume every chain only have 4 ht device at most
-*/
-u32 hcdnx[] = {
-	0x20202020,
-};
-
-
 void get_bus_conf(void)
 {
 	u32 apicid_base;
-	int i;
-
-	sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
-	for (i = 0; i < sysconf.hc_possible_num; i++) {
-		sysconf.pci1234[i] = pci1234x[i];
-		sysconf.hcdn[i] = hcdnx[i];
-	}
 
-	get_pci1234();
+	get_default_pci1234(1);
 
 	sysconf.sbdn = (sysconf.hcdn[0] & 0xff);
 
diff --git a/src/mainboard/asus/m4a785-m/get_bus_conf.c b/src/mainboard/asus/m4a785-m/get_bus_conf.c
index 88b7bf115e..ade9c79e00 100644
--- a/src/mainboard/asus/m4a785-m/get_bus_conf.c
+++ b/src/mainboard/asus/m4a785-m/get_bus_conf.c
@@ -26,36 +26,11 @@
 */
 u32 apicid_sb700;
 
-/*
-* Here you only need to set value in pci1234 for HT-IO that could be installed or not
-* You may need to preset pci1234 for HTIO board,
-* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
-*/
-u32 pci1234x[] = {
-	0x0000ff0,
-};
-
-/*
-* HT Chain device num, actually it is unit id base of every ht device in chain,
-* assume every chain only have 4 ht device at most
-*/
-u32 hcdnx[] = {
-	0x20202020,
-};
-
-
 void get_bus_conf(void)
 {
 	u32 apicid_base;
-	int i;
-
-	sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
-	for (i = 0; i < sysconf.hc_possible_num; i++) {
-		sysconf.pci1234[i] = pci1234x[i];
-		sysconf.hcdn[i] = hcdnx[i];
-	}
 
-	get_pci1234();
+	get_default_pci1234(1);
 
 	sysconf.sbdn = (sysconf.hcdn[0] & 0xff);
 
diff --git a/src/mainboard/asus/m5a88-v/get_bus_conf.c b/src/mainboard/asus/m5a88-v/get_bus_conf.c
index 598bef42d1..d21b500fa5 100644
--- a/src/mainboard/asus/m5a88-v/get_bus_conf.c
+++ b/src/mainboard/asus/m5a88-v/get_bus_conf.c
@@ -25,37 +25,11 @@
 */
 u32 apicid_sb800;
 
-/*
-* Here you only need to set value in pci1234 for HT-IO that could be installed or not
-* You may need to preset pci1234 for HTIO board,
-* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
-*/
-u32 pci1234x[] = {
-	0x0000ff0,
-};
-
-/*
-* HT Chain device num, actually it is unit id base of every ht device in chain,
-* assume every chain only have 4 ht device at most
-*/
-u32 hcdnx[] = {
-	0x20202020,
-};
-
-
-
 void get_bus_conf(void)
 {
 	u32 apicid_base;
-	int i;
-
-	sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
-	for (i = 0; i < sysconf.hc_possible_num; i++) {
-		sysconf.pci1234[i] = pci1234x[i];
-		sysconf.hcdn[i] = hcdnx[i];
-	}
 
-	get_pci1234();
+	get_default_pci1234(1);
 
 	sysconf.sbdn = (sysconf.hcdn[0] & 0xff);