mainboard/bap/ode_e21XX: Add board support

Add next generation of BAPs (https://www.unibap.com/) SOC module,
called ode_e21XX.
Hardware is similar to e20XX (AMD G-Series GX-411GA Kabini),
but it includes a new AMD G-Series GX-412HC (Steppe Eagle)
and an updated Microsemi FPGA.
Changes to Olivehillplus:
- Add SuperIO Fintek F81866D
- Soldered down DDR3 with ECC
- User can choose between different DDR3 clk settings
(lowest setting can save up to 1.2W)
- Soldered down Microsemi M2S060 FPGA on PCIe lanes 2-3

Tested with:
- Payload SeaBIOS 1.9.1
- Lubuntu 16.04, Kernel 4.4.0
- Windows 10 (UART functionality)
Known problems:
- S3 not working
- IOMMU not working

Change-Id: I41f6a3334ad2128695a3f7c0a6444f1678d2626e
Signed-off-by: Fabian Kunkel <fabi@adv.bruhnspace.com>
Reviewed-on: https://review.coreboot.org/15918
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>

12 files changed, 894 insertions, 54 deletions

diff --git a/src/mainboard/bap/ode_e21XX/BAP_Q7_1066.spd.hex b/src/mainboard/bap/ode_e21XX/BAP_Q7_1066.spd.hex
new file mode 100644
index 0000000000..507c9f1174
--- /dev/null
+++ b/src/mainboard/bap/ode_e21XX/BAP_Q7_1066.spd.hex
@@ -0,0 +1,231 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2014 Sage Electronic Engineering, LLC.
+# Copyright (C) 2015 BAP - Bruhnspace Advanced Projects
+# (Written by Fabian Kunkel <fabi@adv.bruhnspace.com> for BAP)
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+# GNU General Public License for more details.
+
+# Memory chip: Hynix H5TQ4G63MFR-PBC with ECC
+# BAP ODE E21XX has 2GB ram soldered down on the Q7
+# Memory setting for DDR-1066
+
+#	0 Number of SPD Bytes used / Total SPD Size / CRC Coverage
+#		bits[3:0]: 1 = 128 SPD Bytes Used
+#		bits[6:4]: 1 = 256 SPD Bytes Total
+#		bit7     : 0 = CRC covers bytes 0 ~ 125
+11
+
+#	1 SPD Revision -
+#		0x12 = Revision 1.2
+12
+
+#	2 Key Byte / DRAM Device Type
+#		bits[7:0]: 0x0b = DDR3 SDRAM
+0B
+
+#	3 Key Byte / Module Type
+#		bits[3:0]: 3 = SO-DIMM
+#		bits[7:4]:     reserved
+03
+
+#	4 SDRAM CHIP Density and Banks
+#		bits[3:0]: 4 = 4 Gigabits Total SDRAM capacity per chip
+#		bits[6:4]: 0 = 3 (8 banks)
+#		bit7     :     reserved
+04
+
+#	5 SDRAM Addressing
+#		bits[2:0]: 1 = 10 Column Address Bits
+#		bits[5:3]: 3 = 15 Row Address Bits
+#		bits[7:6]:     reserved
+19
+
+#	6 Module Nominal Voltage, VDD
+#		bit0     : 0 = 1.5 V operable
+#		bit1     : 0 = NOT 1.35 V operable
+#		bit2     : 0 = NOT 1.25 V operable
+#		bits[7:3]:     reserved
+00
+
+#	7 Module Organization
+#		bits[2:0]: 2 = 16 bits
+#		bits[5:3]: 0 = 1 Rank
+#		bits[7:6]:     reserved
+02
+
+#	8 Module Memory Bus Width
+#		bits[2:0]: 3 = Primary bus width is 64 bits
+#		bits[4:3]: 1 = 1 bit (bus width extension ECC)
+#		bits[7:5]:     reserved
+0B
+
+#	9 Fine Timebase (FTB) Dividend / Divisor
+#		bits[3:0]: 0x01 divisor
+#		bits[7:4]: 0x01 dividend
+#		1/1 = 1ps
+11
+
+#	10 Medium Timebase (MTB) Dividend
+#	11 Medium Timebase (MTB) Divisor
+#		1 / 8 = .125 ns - used for DDR3
+01 08
+
+#	12 SDRAM Minimum Cycle Time (tCKmin)
+#		0x0F  = tCKmin of 1.875 ns = DDR3-1066 (533 MHz clock)
+0F
+
+#	13 Reserved
+00
+
+#	14 CAS Latencies Supported, Least Significant Byte
+#	15 CAS Latencies Supported, Most Significant Byte
+#		Cas Latencies of 8 - 5 are supported
+1E 00
+
+#	16 Minimum CAS Latency Time (tAAmin)
+#		0x69 = 13.125ns - DDR3-1066F
+69
+
+#	17 Minimum Write Recovery Time (tWRmin)
+#		0x78 = tWR of 15ns - All DDR3 speed grades
+78
+
+#	18 Minimum RAS# to CAS# Delay Time (tRCDmin)
+#		0x69 = 13.125ns -  DDR3-1066F
+69
+
+#	19 Minimum Row Active to Row Active Delay Time (tRRDmin)
+#		0x3C = 7.5ns
+3C
+
+#	20 Minimum Row Precharge Delay Time (tRPmin)
+#		0x69 = 13.125ns -  DDR3-1066F
+69
+
+#	21 Upper Nibbles for tRAS and tRC
+#		bits[3:0]: tRAS most significant nibble = 1 (see byte 22)
+#		bits[7:4]: tRC most significant nibble = 1 (see byte 23)
+11
+
+#	22 Minimum Active to Precharge Delay Time (tRASmin), LSB
+#		0x12C = 37.5ns - DDR3-1066 (see byte 21)
+2C
+
+#	23 Minimum Active to Active/Refresh Delay Time (tRCmin), LSB
+#		0x195 = 50.625ns - DDR3-1066F (see byte 21)
+95
+
+#	24 Minimum Refresh Recovery Delay Time (tRFCmin), LSB
+#	25 Minimum Refresh Recovery Delay Time (tRFCmin), MSB
+#		0x500 = 160ns - for 2 Gigabit chips
+80 07
+
+#	26 Minimum Internal Write to Read Command Delay Time (tWTRmin)
+#		0x3c = 7.5 ns - All DDR3 SDRAM speed bins
+3C
+
+#	27 Minimum Internal Read to Precharge Command Delay Time (tRTPmin)
+#		0x3c =  7.5ns -  All DDR3 SDRAM speed bins
+3C
+
+#	28 Upper Nibble for tFAWmin
+#	29 Minimum Four Activate Window Delay Time (tFAWmin)
+#		0x0190 = 50ns -  DDR3-1066, 2 KB page size
+01 90
+
+#	30 SDRAM Optional Feature
+#		bit0     : 1= RZQ/6 supported
+#		bit1     : 1 = RZQ/7 supported
+#		bits[6:2]:     reserved
+#		bit7     : 0 = DLL Off mode supported
+03
+
+#	31 SDRAM Thermal and Refresh Options
+#		bit0     : 0 = Temp up to 95c supported
+#		bit1     : 0 = 85-95c uses 2x refresh rate
+#		bit2     : 1 = Auto Self Refresh supported
+#		bit3     : 0 = no on die thermal sensor
+#		bits[6:4]:     reserved
+#		bit7     : 0 = partial self refresh supported
+04
+
+#	32 Module Thermal Sensor
+#		0 = Thermal sensor not incorporated onto this assembly
+00
+
+#	33 SDRAM Device Type
+#		bits[1:0]: 0 = Signal Loading not specified
+#		bits[3:2]:     reserved
+#		bits[6:4]: 0 = Die count not specified
+#		bit7     : 0 = Standard Monolithic DRAM Device
+00
+
+#	34 Fine Offset for SDRAM Minimum Cycle Time (tCKmin)
+#	35 Fine Offset for Minimum CAS Latency Time (tAAmin)
+#	36 Fine Offset for Minimum RAS# to CAS# Delay Time (tRCDmin)
+#	37 Fine Offset for Minimum Row Precharge Delay Time (tRPmin)
+#	38 Fine Offset for Minimum Active to Active/Refresh Delay (tRCmin)
+00 00 00 00 00
+
+#	39 - 59 (reserved)
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00
+
+#	60 Raw Card Extension, Module Nominal Height
+#		bits[4:0]: 0 = <= 15mm tall
+#		bits[7:5]: 0 = raw card revision 0-3
+00
+
+#	61 Module Maximum Thickness
+#		bits[3:0]: 0 = thickness front <= 1mm
+#		bits[7:4]: 0 = thinkness back <= 1mm
+00
+
+#	62 Reference Raw Card Used
+#		bits[4:0]: 0 = Reference Raw card A used
+#		bits[6:5]: 0 = revision 0
+#		bit7     : 0 = Reference raw cards A through AL
+00
+
+#	63 Address Mapping from Edge Connector to DRAM
+#		bit0     : 0 = standard mapping (not mirrored)
+#		bits[7:1]:     reserved
+00
+
+#	64 - 116 (reserved)
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00
+
+#	117 - 118 Module ID: Module Manufacturers JEDEC ID Code
+#		0x80AD = Hynix
+80 AD
+
+#	119 Module ID: Module Manufacturing Location - oem specified
+#	120 Module ID: Module Manufacture Year in BCD
+#		0x00 = 2000
+00 00
+
+#	121 Module ID: Module Manufacture week
+#		0x00 = 0th week
+00
+
+#	122 - 125: Module Serial Number
+00 00 00 00
+
+#	126 - 127: Cyclical Redundancy Code
+E9 40
diff --git a/src/mainboard/bap/ode_e21XX/BAP_Q7_1333.spd.hex b/src/mainboard/bap/ode_e21XX/BAP_Q7_1333.spd.hex
new file mode 100644
index 0000000000..1991f84fb2
--- /dev/null
+++ b/src/mainboard/bap/ode_e21XX/BAP_Q7_1333.spd.hex
@@ -0,0 +1,231 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2014 Sage Electronic Engineering, LLC.
+# Copyright (C) 2015 BAP - Bruhnspace Advanced Projects
+# (Written by Fabian Kunkel <fabi@adv.bruhnspace.com> for BAP)
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+# GNU General Public License for more details.
+
+# Memory chip: Hynix H5TQ4G63MFR-PBC with ECC
+# BAP ODE E21XX has 2GB ram soldered down on the Q7
+# Memory setting for DDR-1333
+
+#	0 Number of SPD Bytes used / Total SPD Size / CRC Coverage
+#		bits[3:0]: 1 = 128 SPD Bytes Used
+#		bits[6:4]: 1 = 256 SPD Bytes Total
+#		bit7     : 0 = CRC covers bytes 0 ~ 125
+11
+
+#	1 SPD Revision -
+#		0x13 = Revision 1.3
+13
+
+#	2 Key Byte / DRAM Device Type
+#		bits[7:0]: 0x0b = DDR3 SDRAM
+0B
+
+#	3 Key Byte / Module Type
+#		bits[3:0]: 3 = SO-DIMM
+#		bits[7:4]:     reserved
+03
+
+#	4 SDRAM CHIP Density and Banks
+#		bits[3:0]: 4 = 4 Gigabits Total SDRAM capacity per chip
+#		bits[6:4]: 0 = 3 (8 banks)
+#		bit7     :     reserved
+04
+
+#	5 SDRAM Addressing
+#		bits[2:0]: 1 = 10 Column Address Bits
+#		bits[5:3]: 3 = 15 Row Address Bits
+#		bits[7:6]:     reserved
+19
+
+#	6 Module Nominal Voltage, VDD
+#		bit0     : 0 = 1.5 V operable
+#		bit1     : 0 = NOT 1.35 V operable
+#		bit2     : 0 = NOT 1.25 V operable
+#		bits[7:3]:     reserved
+00
+
+#	7 Module Organization
+#		bits[2:0]: 2 = 16 bits
+#		bits[5:3]: 0 = 1 Rank
+#		bits[7:6]:     reserved
+02
+
+#	8 Module Memory Bus Width
+#		bits[2:0]: 3 = Primary bus width is 64 bits
+#		bits[4:3]: 1 = 1 bit (bus width extension ECC)
+#		bits[7:5]:     reserved
+0B
+
+#	9 Fine Timebase (FTB) Dividend / Divisor
+#		bits[3:0]: 0x01 divisor
+#		bits[7:4]: 0x01 dividend
+#		1/1 = 1ps
+11
+
+#	10 Medium Timebase (MTB) Dividend
+#	11 Medium Timebase (MTB) Divisor
+#		1 / 8 = .125 ns - used for DDR3
+01 08
+
+#	12 SDRAM Minimum Cycle Time (tCKmin)
+#		0x0C  = tCKmin of 1.5 ns = DDR3-1333 (667 MHz clock)
+0C
+
+#	13 Reserved
+00
+
+#	14 CAS Latencies Supported, Least Significant Byte
+#	15 CAS Latencies Supported, Most Significant Byte
+#		Cas Latencies of 9 - 5 are supported (no 7)
+36 00
+
+#	16 Minimum CAS Latency Time (tAAmin)
+#		0x6C = 13.5ns - DDR3-1333H
+6C
+
+#	17 Minimum Write Recovery Time (tWRmin)
+#		0x78 = tWR of 15ns - All DDR3 speed grades
+78
+
+#	18 Minimum RAS# to CAS# Delay Time (tRCDmin)
+#		0x6C = 13.5ns -  DDR3-1333H
+6C
+
+#	19 Minimum Row Active to Row Active Delay Time (tRRDmin)
+#		0x3C = 7.5ns
+3C
+
+#	20 Minimum Row Precharge Delay Time (tRPmin)
+#		0x6C = 13.5ns -  DDR3-1333H
+6C
+
+#	21 Upper Nibbles for tRAS and tRC
+#		bits[3:0]: tRAS most significant nibble = 1 (see byte 22)
+#		bits[7:4]: tRC most significant nibble = 1 (see byte 23)
+11
+
+#	22 Minimum Active to Precharge Delay Time (tRASmin), LSB
+#		0x120 = 36ns - DDR3-1333 (see byte 21)
+20
+
+#	23 Minimum Active to Active/Refresh Delay Time (tRCmin), LSB
+#		0x18C = 49.5ns - DDR3-1333H (see byte 21)
+8C
+
+#	24 Minimum Refresh Recovery Delay Time (tRFCmin), LSB
+#	25 Minimum Refresh Recovery Delay Time (tRFCmin), MSB
+#		0x500 = 160ns - for 2 Gigabit chips
+80 07
+
+#	26 Minimum Internal Write to Read Command Delay Time (tWTRmin)
+#		0x3c = 7.5 ns - All DDR3 SDRAM speed bins
+3C
+
+#	27 Minimum Internal Read to Precharge Command Delay Time (tRTPmin)
+#		0x3c =  7.5ns -  All DDR3 SDRAM speed bins
+3C
+
+#	28 Upper Nibble for tFAWmin
+#	29 Minimum Four Activate Window Delay Time (tFAWmin)
+#		0x0168 = 45ns -  DDR3-1333, 2 KB page size
+01 68
+
+#	30 SDRAM Optional Feature
+#		bit0     : 1= RZQ/6 supported
+#		bit1     : 1 = RZQ/7 supported
+#		bits[6:2]:     reserved
+#		bit7     : 0 = DLL Off mode supported
+03
+
+#	31 SDRAM Thermal and Refresh Options
+#		bit0     : 0 = Temp up to 95c supported
+#		bit1     : 0 = 85-95c uses 2x refresh rate
+#		bit2     : 1 = Auto Self Refresh supported
+#		bit3     : 0 = no on die thermal sensor
+#		bits[6:4]:     reserved
+#		bit7     : 0 = partial self refresh supported
+04
+
+#	32 Module Thermal Sensor
+#		0 = Thermal sensor not incorporated onto this assembly
+00
+
+#	33 SDRAM Device Type
+#		bits[1:0]: 0 = Signal Loading not specified
+#		bits[3:2]:     reserved
+#		bits[6:4]: 0 = Die count not specified
+#		bit7     : 0 = Standard Monolithic DRAM Device
+00
+
+#	34 Fine Offset for SDRAM Minimum Cycle Time (tCKmin)
+#	35 Fine Offset for Minimum CAS Latency Time (tAAmin)
+#	36 Fine Offset for Minimum RAS# to CAS# Delay Time (tRCDmin)
+#	37 Fine Offset for Minimum Row Precharge Delay Time (tRPmin)
+#	38 Fine Offset for Minimum Active to Active/Refresh Delay (tRCmin)
+00 00 00 00 00
+
+#	39 - 59 (reserved)
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00
+
+#	60 Raw Card Extension, Module Nominal Height
+#		bits[4:0]: 0 = <= 15mm tall
+#		bits[7:5]: 0 = raw card revision 0-3
+00
+
+#	61 Module Maximum Thickness
+#		bits[3:0]: 0 = thickness front <= 1mm
+#		bits[7:4]: 0 = thinkness back <= 1mm
+00
+
+#	62 Reference Raw Card Used
+#		bits[4:0]: 0 = Reference Raw card A used
+#		bits[6:5]: 0 = revision 0
+#		bit7     : 0 = Reference raw cards A through AL
+00
+
+#	63 Address Mapping from Edge Connector to DRAM
+#		bit0     : 0 = standard mapping (not mirrored)
+#		bits[7:1]:     reserved
+00
+
+#	64 - 116 (reserved)
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00
+
+#	117 - 118 Module ID: Module Manufacturers JEDEC ID Code
+#		0x80AD = Hynix
+80 AD
+
+#	119 Module ID: Module Manufacturing Location - oem specified
+#	120 Module ID: Module Manufacture Year in BCD
+#		0x00 = 2000
+00 00
+
+#	121 Module ID: Module Manufacture week
+#		0x00 = 0th week
+00
+
+#	122 - 125: Module Serial Number
+00 00 00 00
+
+#	126 - 127: Cyclical Redundancy Code
+95 b9
diff --git a/src/mainboard/bap/ode_e21XX/BAP_Q7_800.spd.hex b/src/mainboard/bap/ode_e21XX/BAP_Q7_800.spd.hex
new file mode 100644
index 0000000000..e657179405
--- /dev/null
+++ b/src/mainboard/bap/ode_e21XX/BAP_Q7_800.spd.hex
@@ -0,0 +1,231 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2014 Sage Electronic Engineering, LLC.
+# Copyright (C) 2015 BAP - Bruhnspace Advanced Projects
+# (Written by Fabian Kunkel <fabi@adv.bruhnspace.com> for BAP)
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+# GNU General Public License for more details.
+
+# Memory chip: Hynix H5TQ4G63MFR-PBC with ECC
+# BAP ODE E21XX has 2GB ram soldered down on the Q7
+# Memory setting for DDR-800
+
+#	0 Number of SPD Bytes used / Total SPD Size / CRC Coverage
+#		bits[3:0]: 1 = 128 SPD Bytes Used
+#		bits[6:4]: 1 = 256 SPD Bytes Total
+#		bit7     : 0 = CRC covers bytes 0 ~ 125
+11
+
+#	1 SPD Revision -
+#		0x11 = Revision 1.1
+11
+
+#	2 Key Byte / DRAM Device Type
+#		bits[7:0]: 0x0b = DDR3 SDRAM
+0B
+
+#	3 Key Byte / Module Type
+#		bits[3:0]: 3 = SO-DIMM
+#		bits[7:4]:     reserved
+03
+
+#	4 SDRAM CHIP Density and Banks
+#		bits[3:0]: 4 = 4 Gigabits Total SDRAM capacity per chip
+#		bits[6:4]: 0 = 3 (8 banks)
+#		bit7     :     reserved
+04
+
+#	5 SDRAM Addressing
+#		bits[2:0]: 1 = 10 Column Address Bits
+#		bits[5:3]: 3 = 15 Row Address Bits
+#		bits[7:6]:     reserved
+19
+
+#	6 Module Nominal Voltage, VDD
+#		bit0     : 0 = 1.5 V operable
+#		bit1     : 0 = NOT 1.35 V operable
+#		bit2     : 0 = NOT 1.25 V operable
+#		bits[7:3]:     reserved
+00
+
+#	7 Module Organization
+#		bits[2:0]: 2 = 16 bits
+#		bits[5:3]: 0 = 1 Rank
+#		bits[7:6]:     reserved
+02
+
+#	8 Module Memory Bus Width
+#		bits[2:0]: 3 = Primary bus width is 64 bits
+#		bits[4:3]: 1 = 1 bit (bus width extension ECC)
+#		bits[7:5]:     reserved
+0B
+
+#	9 Fine Timebase (FTB) Dividend / Divisor
+#		bits[3:0]: 0x01 divisor
+#		bits[7:4]: 0x01 dividend
+#		1/1 = 1ps
+11
+
+#	10 Medium Timebase (MTB) Dividend
+#	11 Medium Timebase (MTB) Divisor
+#		1 / 8 = .125 ns - used for DDR3
+01 08
+
+#	12 SDRAM Minimum Cycle Time (tCKmin)
+#		0x14  = tCKmin of 2.5 ns = DDR3-800 (400 MHz clock)
+14
+
+#	13 Reserved
+00
+
+#	14 CAS Latencies Supported, Least Significant Byte
+#	15 CAS Latencies Supported, Most Significant Byte
+#		CAS Latencies of 6 - 5 are supported
+06 00
+
+#	16 Minimum CAS Latency Time (tAAmin)
+#		0x78 = 15ns - DDR3-800E
+78
+
+#	17 Minimum Write Recovery Time (tWRmin)
+#		0x78 = tWR of 15ns - All DDR3 speed grades
+78
+
+#	18 Minimum RAS# to CAS# Delay Time (tRCDmin)
+#		0x6E = 15ns -  DDR3-800E
+78
+
+#	19 Minimum Row Active to Row Active Delay Time (tRRDmin)
+#		0x3C = 7.5ns
+3C
+
+#	20 Minimum Row Precharge Delay Time (tRPmin)
+#		0x6E = 15ns -  DDR3-800E
+78
+
+#	21 Upper Nibbles for tRAS and tRC
+#		bits[3:0]: tRAS most significant nibble = 1 (see byte 22)
+#		bits[7:4]: tRC most significant nibble = 1 (see byte 23)
+11
+
+#	22 Minimum Active to Precharge Delay Time (tRASmin), LSB
+#		0x12C = 37.5ns - DDR3-800E (see byte 21)
+2C
+
+#	23 Minimum Active to Active/Refresh Delay Time (tRCmin), LSB
+#		0x1A4 = 52.5ns - DDR3-800E (see byte 21)
+A4
+
+#	24 Minimum Refresh Recovery Delay Time (tRFCmin), LSB
+#	25 Minimum Refresh Recovery Delay Time (tRFCmin), MSB
+#		0x780 = 208ns - for 4 Gigabit chips
+80 07
+
+#	26 Minimum Internal Write to Read Command Delay Time (tWTRmin)
+#		0x3c = 7.5 ns - All DDR3 SDRAM speed bins
+3C
+
+#	27 Minimum Internal Read to Precharge Command Delay Time (tRTPmin)
+#		0x3c =  7.5ns -  All DDR3 SDRAM speed bins
+3C
+
+#	28 Upper Nibble for tFAWmin
+#	29 Minimum Four Activate Window Delay Time (tFAWmin)
+#		0x0190 = 50ns -  DDR3-800, 2 KB page size
+01 90
+
+#	30 SDRAM Optional Feature
+#		bit0     : 1= RZQ/6 supported
+#		bit1     : 1 = RZQ/7 supported
+#		bits[6:2]:     reserved
+#		bit7     : 0 = DLL Off mode supported
+03
+
+#	31 SDRAM Thermal and Refresh Options
+#		bit0     : 0 = Temp up to 95c supported
+#		bit1     : 0 = 85-95c uses 2x refresh rate
+#		bit2     : 1 = Auto Self Refresh supported
+#		bit3     : 0 = no on die thermal sensor
+#		bits[6:4]:     reserved
+#		bit7     : 0 = partial self refresh supported
+04
+
+#	32 Module Thermal Sensor
+#		0 = Thermal sensor not incorporated onto this assembly
+00
+
+#	33 SDRAM Device Type
+#		bits[1:0]: 0 = Signal Loading not specified
+#		bits[3:2]:     reserved
+#		bits[6:4]: 0 = Die count not specified
+#		bit7     : 0 = Standard Monolithic DRAM Device
+00
+
+#	34 Fine Offset for SDRAM Minimum Cycle Time (tCKmin)
+#	35 Fine Offset for Minimum CAS Latency Time (tAAmin)
+#	36 Fine Offset for Minimum RAS# to CAS# Delay Time (tRCDmin)
+#	37 Fine Offset for Minimum Row Precharge Delay Time (tRPmin)
+#	38 Fine Offset for Minimum Active to Active/Refresh Delay (tRCmin)
+00 00 00 00 00
+
+#	39 - 59 (reserved)
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00
+
+#	60 Raw Card Extension, Module Nominal Height
+#		bits[4:0]: 0 = <= 15mm tall
+#		bits[7:5]: 0 = raw card revision 0-3
+00
+
+#	61 Module Maximum Thickness
+#		bits[3:0]: 0 = thickness front <= 1mm
+#		bits[7:4]: 0 = thinkness back <= 1mm
+00
+
+#	62 Reference Raw Card Used
+#		bits[4:0]: 0 = Reference Raw card A used
+#		bits[6:5]: 0 = revision 0
+#		bit7     : 0 = Reference raw cards A through AL
+00
+
+#	63 Address Mapping from Edge Connector to DRAM
+#		bit0     : 0 = standard mapping (not mirrored)
+#		bits[7:1]:     reserved
+00
+
+#	64 - 116 (reserved)
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00
+
+#	117 - 118 Module ID: Module Manufacturers JEDEC ID Code
+#		0x80AD = Hynix
+80 AD
+
+#	119 Module ID: Module Manufacturing Location - oem specified
+#	120 Module ID: Module Manufacture Year in BCD
+#		0x00 = 2000
+00 00
+
+#	121 Module ID: Module Manufacture week
+#		0x00 = 0th week
+00
+
+#	122 - 125: Module Serial Number
+00 00 00 00
+
+#	126 - 127: Cyclical Redundancy Code
+48 91
diff --git a/src/mainboard/bap/ode_e21XX/BiosCallOuts.c b/src/mainboard/bap/ode_e21XX/BiosCallOuts.c
index 9528f72585..1b37865d17 100644
--- a/src/mainboard/bap/ode_e21XX/BiosCallOuts.c
+++ b/src/mainboard/bap/ode_e21XX/BiosCallOuts.c
@@ -25,15 +25,17 @@
 #endif
 #include "hudson.h"
 #include <stdlib.h>
+#include <spd_cache.h>
 
 static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr);
+static AGESA_STATUS board_ReadSpd_from_cbfs(UINT32 Func, UINTN Data, VOID *ConfigPtr);
 
 const BIOS_CALLOUT_STRUCT BiosCallouts[] =
 {
 	{AGESA_ALLOCATE_BUFFER,          agesa_AllocateBuffer },
 	{AGESA_DEALLOCATE_BUFFER,        agesa_DeallocateBuffer },
 	{AGESA_LOCATE_BUFFER,            agesa_LocateBuffer },
-	{AGESA_READ_SPD,                 agesa_ReadSpd },
+	{AGESA_READ_SPD,                 board_ReadSpd_from_cbfs },
 	{AGESA_DO_RESET,                 agesa_Reset },
 	{AGESA_READ_SPD_RECOVERY,        agesa_NoopUnsupported },
 	{AGESA_RUNFUNC_ONAP,             agesa_RunFuncOnAp },
@@ -303,3 +305,33 @@ static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr)
 
 	return AGESA_SUCCESS;
 }
+
+static AGESA_STATUS board_ReadSpd_from_cbfs(UINT32 Func, UINTN Data, VOID *ConfigPtr)
+{
+	AGESA_STATUS Status = AGESA_UNSUPPORTED;
+#ifdef __PRE_RAM__
+	AGESA_READ_SPD_PARAMS *info = ConfigPtr;
+	u8 index;
+
+	if (IS_ENABLED(CONFIG_BAP_E21_DDR3_1066))
+		index = 1;
+	else if (IS_ENABLED(CONFIG_BAP_E21_DDR3_1333))
+		index = 2;
+	else	/* CONFIG_BAP_E21_DDR3_800 */
+		index = 0;
+
+	if (info->MemChannelId > 0)
+		return AGESA_UNSUPPORTED;
+	if (info->SocketId != 0)
+		return AGESA_UNSUPPORTED;
+	if (info->DimmId != 0)
+		return AGESA_UNSUPPORTED;
+
+	/* Read index 0, first SPD_SIZE bytes of spd.bin file. */
+	if (read_spd_from_cbfs((u8 *)info->Buffer, index) < 0)
+		die("No SPD data\n");
+
+	Status = AGESA_SUCCESS;
+#endif
+	return Status;
+}
diff --git a/src/mainboard/bap/ode_e21XX/Kconfig b/src/mainboard/bap/ode_e21XX/Kconfig
index 426a99490d..b35674987c 100644
--- a/src/mainboard/bap/ode_e21XX/Kconfig
+++ b/src/mainboard/bap/ode_e21XX/Kconfig
@@ -26,6 +26,8 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select HAVE_ACPI_TABLES
 	select BOARD_ROMSIZE_KB_8192
 	select GFXUMA
+	select SUPERIO_FINTEK_F81866D
+	select SPD_CACHE
 
 config MAINBOARD_DIR
 	string
@@ -51,4 +53,25 @@ config HUDSON_LEGACY_FREE
 	bool
 	default y
 
+choice
+	prompt "Select DDR3 clock"
+	default BAP_E21_DDR3_1333
+	help
+	  Select your preferenced DDR3 clock setting.
+
+	  Note: This option changes the total power consumption.
+
+	  If unsure, use DDR3-1333.
+
+config BAP_E21_DDR3_800
+	bool "Select DDR3-800"
+
+config BAP_E21_DDR3_1066
+	bool "Select DDR3-1066"
+
+config BAP_E21_DDR3_1333
+	bool "Select DDR3-1333"
+
+endchoice
+
 endif # BOARD_ODE_E21XX
diff --git a/src/mainboard/bap/ode_e21XX/Makefile.inc b/src/mainboard/bap/ode_e21XX/Makefile.inc
index 37c1dceead..4f4a11d7ce 100644
--- a/src/mainboard/bap/ode_e21XX/Makefile.inc
+++ b/src/mainboard/bap/ode_e21XX/Makefile.inc
@@ -18,3 +18,23 @@ romstage-y += OemCustomize.c
 
 ramstage-y += BiosCallOuts.c
 ramstage-y += OemCustomize.c
+
+## DIMM SPD for on-board memory
+SPD_BIN = $(obj)/spd.bin
+
+# Order of names in SPD_SOURCES is important!
+SPD_SOURCES  = BAP_Q7_800 BAP_Q7_1066 BAP_Q7_1333
+
+SPD_DEPS := $(foreach f, $(SPD_SOURCES), src/mainboard/$(MAINBOARDDIR)/$(f).spd.hex)
+
+# Include spd rom data
+$(SPD_BIN): $(SPD_DEPS)
+	for f in $+; \
+	  do for c in $$(cat $$f | grep -v ^#); \
+	    do printf $$(printf '\%o' 0x$$c); \
+	  done; \
+	done > $@
+
+cbfs-files-y += spd.bin
+spd.bin-file := $(SPD_BIN)
+spd.bin-type := spd
diff --git a/src/mainboard/bap/ode_e21XX/OemCustomize.c b/src/mainboard/bap/ode_e21XX/OemCustomize.c
index ac60c42082..3750ba4305 100644
--- a/src/mainboard/bap/ode_e21XX/OemCustomize.c
+++ b/src/mainboard/bap/ode_e21XX/OemCustomize.c
@@ -18,20 +18,10 @@
 #define FILECODE PROC_GNB_PCIE_FAMILY_0X15_F15PCIECOMPLEXCONFIG_FILECODE
 
 static const PCIe_PORT_DESCRIPTOR PortList [] = {
-	/* Initialize Port descriptor (PCIe port, Lane 3, PCI Device 2, Function 5) */
+	/* Initialize Port descriptor (PCIe port, Lanes 2-3, PCI Device 2, Function 4) */
 	{
 		0,
-		PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 3, 3),
-		PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 5,
-				HotplugDisabled,
-				PcieGenMaxSupported,
-				PcieGenMaxSupported,
-				AspmDisabled, 0x01, 0)
-	},
-	/* Initialize Port descriptor (PCIe port, Lane 2, PCI Device 2, Function 4) */
-	{
-		0,
-		PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 2, 2),
+		PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 2, 3),
 		PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 4,
 				HotplugDisabled,
 				PcieGenMaxSupported,
@@ -71,23 +61,17 @@ static const PCIe_PORT_DESCRIPTOR PortList [] = {
 };
 
 static const PCIe_DDI_DESCRIPTOR DdiList [] = {
-	/* DP0 to HDMI0/DP */
+	/* eDP0 to LVDS connector */
 	{
 		0,
 		PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 8, 11),
 		PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux1, Hdp1)
 	},
-	/* DP1 to FCH */
-	{
-		0,
-		PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 12, 15),
-		PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux2, Hdp2)
-	},
-	/* DP2 to HDMI1/DP */
+	/* DP1 to HDMI */
 	{
 		DESCRIPTOR_TERMINATE_LIST,
-		PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 16, 19),
-		PCIE_DDI_DATA_INITIALIZER (ConnectorTypeCrt, Aux3, Hdp3)
+		PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 12, 15),
+		PCIE_DDI_DATA_INITIALIZER (ConnectorTypeHDMI, Aux2, Hdp2)
 	},
 };
 
diff --git a/src/mainboard/bap/ode_e21XX/acpi/superio.asl b/src/mainboard/bap/ode_e21XX/acpi/superio.asl
new file mode 100644
index 0000000000..92bd10680b
--- /dev/null
+++ b/src/mainboard/bap/ode_e21XX/acpi/superio.asl
@@ -0,0 +1,48 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ * Copyright (C) 2015 BAP - Bruhnspace Advanced Projects
+ * (Written by Fabian Kunkel <fabi@adv.bruhnspace.com> for BAP)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/* SuperIO support for Windows */
+
+Device (UAR1) {
+	Name (_HID, EISAID ("PNP0501"))
+	Name (_UID, 1)
+	Name (_CRS, ResourceTemplate ()
+	{
+		IO (Decode16, 0x03F8, 0x03F8, 0x08, 0x08)
+		IRQNoFlags () {4}
+	})
+	Name (_PRS, ResourceTemplate ()
+	{
+		IO (Decode16, 0x03F8, 0x03F8, 0x08, 0x08)
+		IRQNoFlags () {4}
+	})
+}
+
+Device (UAR2) {
+	Name (_HID, EISAID ("PNP0501"))
+	Name (_UID, 2)
+	Name (_CRS, ResourceTemplate ()
+	{
+		IO (Decode16, 0x02F8, 0x02F8, 0x08, 0x08)
+		IRQNoFlags () {3}
+	})
+	Name (_PRS, ResourceTemplate ()
+	{
+		IO (Decode16, 0x02F8, 0x02F8, 0x08, 0x08)
+		IRQNoFlags () {3}
+	})
+}
diff --git a/src/mainboard/bap/ode_e21XX/board_info.txt b/src/mainboard/bap/ode_e21XX/board_info.txt
index d2c6670225..dffb350694 100644
--- a/src/mainboard/bap/ode_e21XX/board_info.txt
+++ b/src/mainboard/bap/ode_e21XX/board_info.txt
@@ -1,5 +1,5 @@
-Board name: DB-FT3b (Olive Hill+)
-Board URL: http://wwwd.amd.com/amd/devsite.nsf/platforms/DB-FT3.htm
+Board name: ODE_e21xx
+Board URL: http://www.unibap.com/advanced-heterogeneous-computing-modules/
 Category: eval
 ROM protocol: SPI
 ROM socketed: n
diff --git a/src/mainboard/bap/ode_e21XX/devicetree.cb b/src/mainboard/bap/ode_e21XX/devicetree.cb
index ee0cd98bfe..1a900c0c7c 100644
--- a/src/mainboard/bap/ode_e21XX/devicetree.cb
+++ b/src/mainboard/bap/ode_e21XX/devicetree.cb
@@ -30,10 +30,9 @@ chip northbridge/amd/pi/00730F01/root_complex
 				device pci 1.1 on  end # Internal Multimedia
 				device pci 2.0 on  end # PCIe Host Bridge
 				device pci 2.1 on  end # x4 PCIe slot
-				device pci 2.2 on  end # mPCIe slot
-				device pci 2.3 on  end # Realtek NIC
-				device pci 2.4 on  end # Edge Connector
-				device pci 2.5 on  end # Edge Connector
+				device pci 2.2 on  end # PCIe Q7 Realtek GBit LAN
+				device pci 2.3 on  end # PCIe CB Realtek GBit LAN
+				device pci 2.4 on  end # PCIe x2 BAP FPGA
 				device pci 8.0 on  end # Platform Security Processor
 			end	#chip northbridge/amd/pi/00730F01
 
@@ -42,18 +41,67 @@ chip northbridge/amd/pi/00730F01/root_complex
 				device pci 11.0 on  end # SATA
 				device pci 12.0 on  end # EHCI #0
 				device pci 13.0 on  end # EHCI #1
-				device pci 14.0 on      # SMBus
-					chip drivers/generic/generic #dimm 0-0-0
-						device i2c 50 on end
-					end
-					chip drivers/generic/generic #dimm 0-0-1
-						device i2c 51 on end
-					end
-				end # SMbus
+				device pci 14.0 on  end # SMBus
 				device pci 14.2 on  end # HDA	0x4383
-				device pci 14.3 on  end # LPC	0x439d
+				device pci 14.3 on 	# LPC	0x439d
+					chip superio/fintek/f81866d
+						register "hwm_amd_tsi_addr" = "0x98"	# Set to AMD
+						register "hwm_amd_tsi_control" = "0x02"	# Set to AMD
+						register "hwm_fan_select" = "0xC0"	# Sets Fan2 to PWM
+						register "hwm_fan_mode" = "0xD5"	# Sets FAN1-3 to Auto RPM mode
+						register "hwm_fan3_control" = "0x00"	# Fan control 23kHz
+						register "hwm_fan2_temp_map_select" = "0x1E"	# Fan control 23kHz
+						register "hwm_fan2_bound1" = "0x3C"	# 60°C
+						register "hwm_fan2_bound2" = "0x32"	# 50°C
+						register "hwm_fan2_bound3" = "0x28"	# 40°C
+						register "hwm_fan2_bound4" = "0x1E"	# 30°C
+						register "hwm_fan2_seg1_speed" = "0xFF"	# 100%
+						register "hwm_fan2_seg2_speed" = "0xD9"	# 85%
+						register "hwm_fan2_seg3_speed" = "0xB2"	# 70%
+						register "hwm_fan2_seg4_speed" = "0x99"	# 60%
+						register "hwm_fan2_seg5_speed" = "0x80"	# 50%
+						register "hwm_temp_sens_type" = "0x04"	# Sets temp sensor 1 type to to thermistor
+						device pnp 4e.0 off		# Floppy
+							io 0x60 = 0x3f0
+							irq 0x70 = 6
+							drq 0x74 = 2
+						end
+						device pnp 4e.3 off end			# Parallel Port
+						device pnp 4e.4 on			# Hardware Monitor
+							io 0x60 = 0x295
+							irq 0x70 = 0
+						end
+						device pnp 4e.5 off #  Keyboard
+							io 0x60 = 0x60
+							io 0x62 = 0x64
+							irq 0x70 = 1
+						end
+						device pnp 4e.6 off end			# GPIO
+						device pnp 4e.7 on end			# WDT
+						device pnp 4e.a off end			# PME
+						device pnp 4e.10 on			# COM1
+							io 0x60 = 0x3f8
+							irq 0x70 = 4
+						end
+						device pnp 4e.11 on			# COM2
+							io 0x60 = 0x2f8
+							irq 0x70 = 3
+						end
+						device pnp 4e.12 off			# COM3
+							io 0x60 = 0x3e8
+							irq 0x70 = 4
+						end
+						device pnp 4e.13 off			# COM4
+							io 0x60 = 0x2e8
+							irq 0x70 = 3
+						end
+						device pnp 4e.14 off			# COM5
+						end
+						device pnp 4e.15 off			# COM6
+						end
+					end # f81866d
+				end #LPC
 				device pci 14.7 on  end # SD
-				device pci 16.0 on  end # EHCI #2
 			end	#chip southbridge/amd/pi/hudson
 
 			device pci 18.0 on  end
@@ -62,10 +110,6 @@ chip northbridge/amd/pi/00730F01/root_complex
 			device pci 18.3 on  end
 			device pci 18.4 on  end
 			device pci 18.5 on  end
-			register "spdAddrLookup" = "
-			{
-				{ {0xA0, 0xA2} }, // socket 0, channel 0, slots 0 & 1 - 8-bit SPD addresses
-			}"
 
 		end #chip northbridge/amd/pi/00730F01 # CPU side of HT root complex
 	end #domain
diff --git a/src/mainboard/bap/ode_e21XX/dsdt.asl b/src/mainboard/bap/ode_e21XX/dsdt.asl
index 45ae428d9f..3afae7a8a6 100644
--- a/src/mainboard/bap/ode_e21XX/dsdt.asl
+++ b/src/mainboard/bap/ode_e21XX/dsdt.asl
@@ -69,6 +69,8 @@ DefinitionBlock (
 
 		/* Describe PCI INT[A-H] for the Southbridge */
 		#include <southbridge/amd/pi/hudson/acpi/pci_int.asl>
+		/* Add UART support for Windows */
+		#include "acpi/superio.asl"
 
 	} /* End \_SB scope */
 
diff --git a/src/mainboard/bap/ode_e21XX/romstage.c b/src/mainboard/bap/ode_e21XX/romstage.c
index a5c529e7c5..8466e251db 100644
--- a/src/mainboard/bap/ode_e21XX/romstage.c
+++ b/src/mainboard/bap/ode_e21XX/romstage.c
@@ -32,6 +32,10 @@
 #include <cpu/x86/lapic.h>
 #include <southbridge/amd/pi/hudson/hudson.h>
 #include <cpu/amd/pi/s3_resume.h>
+#include <superio/fintek/common/fintek.h>
+#include <superio/fintek/f81866d/f81866d.h>
+
+#define SERIAL_DEV1 PNP_DEV(0x4e, F81866D_SP1)
 
 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
@@ -54,7 +58,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 
 	if (!cpu_init_detectedx && boot_cpu()) {
 		post_code(0x30);
-
+		fintek_enable_serial(SERIAL_DEV1, CONFIG_TTYS0_BASE);
 		post_code(0x31);
 		console_init();
 	}
@@ -68,16 +72,6 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 	printk(BIOS_DEBUG, "BSP Family_Model: %08x \n", val);
 	printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx \n", cpu_init_detectedx);
 
-	/*
-	 * This refers to LpcClkDrvSth settling time.  Without this setting, processor
-	 * initialization is slow or incorrect, so this wait has been replicated from
-	 * earlier development boards.
-	 */
-	{
-		int i;
-		for(i = 0; i < 200000; i++) inb(0xCD6);
-	}
-
 	post_code(0x37);
 	AGESAWRAPPER(amdinitreset);