diff options
author | Damien Zammit <damien@zamaudio.com> | 2017-10-04 20:17:02 +1100 |
---|---|---|
committer | Kyösti Mälkki <kyosti.malkki@gmail.com> | 2017-10-14 08:01:51 +0000 |
commit | b93fb1ab16e6def37b09c726747d58f77035209d (patch) | |
tree | 3f419cbcb50e5f30d7288869baa9ad3b9ffdf431 /src/mainboard/biostar/a68n_5200/romstage.c | |
parent | d2b5b734e8d303f35f99523809e3b1044fe5f203 (diff) | |
download | coreboot-b93fb1ab16e6def37b09c726747d58f77035209d.tar.xz |
biostar/a68n_5200: Do actual port
TESTED on Biostar A68N-5200: boots to GNU/Linux
With proprietary VBIOS, even the gfx works in SeaBIOS.
Change-Id: Id44b81345ba189f82413042760d570a746294a1e
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/21872
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Diffstat (limited to 'src/mainboard/biostar/a68n_5200/romstage.c')
-rw-r--r-- | src/mainboard/biostar/a68n_5200/romstage.c | 67 |
1 files changed, 50 insertions, 17 deletions
diff --git a/src/mainboard/biostar/a68n_5200/romstage.c b/src/mainboard/biostar/a68n_5200/romstage.c index 8190cb7711..8df2d95a48 100644 --- a/src/mainboard/biostar/a68n_5200/romstage.c +++ b/src/mainboard/biostar/a68n_5200/romstage.c @@ -2,6 +2,8 @@ * This file is part of the coreboot project. * * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2016 Edward O'Callaghan <funfunctor@folklore1984.net> + * Copyright (C) 2017 Damien Zammit <damien@zamaudio.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -24,31 +26,62 @@ #include <commonlib/loglevel.h> #include <northbridge/amd/agesa/state_machine.h> #include <southbridge/amd/agesa/hudson/hudson.h> +#include <superio/ite/common/ite.h> +#include <superio/ite/it8728f/it8728f.h> + +#define SB_MMIO 0xFED80000 +#define SB_MMIO_MISC32(x) *(volatile u32 *)(SB_MMIO + 0xE00 + (x)) + +#define SERIAL_DEV PNP_DEV(0x2e, IT8728F_SP1) +#define GPIO_DEV PNP_DEV(0x2e, IT8728F_GPIO) +#define CLKIN_DEV PNP_DEV(0x2e, IT8728F_GPIO) + +static void sbxxx_enable_48mhzout(void) +{ + /* most likely programming to 48MHz out signal */ + /* Set auxiliary output clock frequency on OSCOUT1 pin to be 48MHz */ + u32 reg32; + reg32 = SB_MMIO_MISC32(0x28); + reg32 &= 0xfff8ffff; + SB_MMIO_MISC32(0x28) = reg32; + + /* Enable Auxiliary Clock1, disable FCH 14 MHz OscClk */ + reg32 = SB_MMIO_MISC32(0x40); + reg32 &= 0xffffbffb; + SB_MMIO_MISC32(0x40) = reg32; +} void board_BeforeAgesa(struct sysinfo *cb) { - int i; - u32 val; - - /* In Hudson RRG, PMIOxD2[5:4] is "Drive strength control for - * LpcClk[1:0]". To be consistent with Parmer, setting to 4mA - * even though the register is not documented in the Kabini BKDG. - * Otherwise the serial output is bad code. - */ - outb(0xD2, 0xcd6); - outb(0x00, 0xcd7); - - /* Disable PCI-PCI bridge and release GPIO32/33 for other uses. */ - outb(0xea, 0xcd6); + u8 byte; + + /* Enable the AcpiMmio space */ + outb(0x24, 0xcd6); outb(0x1, 0xcd7); /* Set LPC decode enables. */ pci_devfn_t dev = PCI_DEV(0, 0x14, 3); pci_write_config32(dev, 0x44, 0xff03ffd5); - hudson_lpc_port80(); + if (IS_ENABLED(CONFIG_POST_DEVICE_PCI_PCIE)) + hudson_pci_port80(); + + if (IS_ENABLED(CONFIG_POST_DEVICE_LPC)) + hudson_lpc_port80(); + + /* enable SIO LPC decode */ + byte = pci_read_config8(dev, 0x48); + byte |= 3; /* 2e, 2f */ + pci_write_config8(dev, 0x48, byte); + + /* enable serial decode */ + byte = pci_read_config8(dev, 0x44); + byte |= (1 << 6); /* 0x3f8 */ + pci_write_config8(dev, 0x44, byte); - /* On Larne, after LpcClkDrvSth is set, it needs some time to be stable, because of the buffer ICS551M */ - for (i = 0; i < 200000; i++) - val = inb(0xcd6); + /* run ite */ + sbxxx_enable_48mhzout(); + ite_conf_clkin(CLKIN_DEV, ITE_UART_CLK_PREDIVIDE_48); + ite_kill_watchdog(GPIO_DEV); + ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); } |