add the msm800srv ; put the usb in the right place.

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2426 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 193 insertions, 0 deletions

diff --git a/src/mainboard/digitallogic/msm800sev/auto.c b/src/mainboard/digitallogic/msm800sev/auto.c
new file mode 100644
index 0000000000..866f6e4752
--- /dev/null
+++ b/src/mainboard/digitallogic/msm800sev/auto.c
@@ -0,0 +1,193 @@
+#define ASSEMBLY 1
+
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <arch/io.h>
+#include <device/pnp_def.h>
+#include <arch/romcc_io.h>
+#include <arch/hlt.h>
+#include "pc80/serial.c"
+#include "arch/i386/lib/console.c"
+#include "ram/ramtest.c"
+//#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
+#include "cpu/x86/bist.h"
+#include "cpu/x86/msr.h"
+#include <cpu/amd/lxdef.h>
+
+//#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
+
+#include "southbridge/amd/cs5536/cs5536_early_smbus.c"
+#include "southbridge/amd/cs5536/cs5536_early_setup.c"
+
+static inline int spd_read_byte(unsigned device, unsigned address)
+{
+        return smbus_read_byte(device, address);
+}
+
+#include "northbridge/amd/lx/raminit.h"
+
+static inline unsigned int fls(unsigned int x)
+{
+        int r;
+
+        __asm__("bsfl %1,%0\n\t"
+                "jnz 1f\n\t"
+                "movl $32,%0\n"
+                "1:" : "=r" (r) : "g" (x));
+        return r;
+}
+
+
+
+
+/* sdram parameters for OLPC:
+	row address = 13
+	col address = 9
+	banks = 4
+	dimm0size=128MB
+	d0_MB=1 (module banks)
+	d0_cb=4 (component banks)
+	do_psz=4KB	(page size)
+	Trc=10 (clocks) (ref2act)
+	Tras=7 (act2pre)
+	Trcd=3 (act2cmd)
+	Trp=3   (pre2act)
+	Trrd=2 (act2act)
+	Tref=17.8ms
+  */
+static void sdram_set_spd_registers(const struct mem_controller *ctrl) 
+{
+	/* Total size of DIMM = 2^row address (byte 3) * 2^col address (byte 4) *
+	 *                      component Banks (byte 17) * module banks, side (byte 5) *
+	 *                      width in bits (byte 6,7)
+	 *                    = Density per side (byte 31) * number of sides (byte 5) */
+	/* 1. Initialize GLMC registers base on SPD values, do one DIMM for now */
+	msr_t msr;
+	unsigned char module_banks, val;
+
+	
+#if 0	//GX3
+	msr = rdmsr(MC_CF07_DATA);
+
+	/* get module banks (sides) per dimm, SPD byte 5 */
+	module_banks = 1;
+	module_banks >>= 1;
+	msr.hi &= ~(1 << CF07_UPPER_D0_MB_SHIFT);
+	msr.hi |= (module_banks << CF07_UPPER_D0_MB_SHIFT);
+
+	/* get component banks per module bank, SPD byte 17 */
+	val = 4;
+	val >>= 2;
+	msr.hi &= ~(0x1 << CF07_UPPER_D0_CB_SHIFT);
+	msr.hi |=  (val << CF07_UPPER_D0_CB_SHIFT);
+
+	/* get the module bank density, SPD byte 31  */
+	/* this is multiples of 8 MB */
+	/* actually it is 2^x*4, where x is the value you put in */
+	/* for OLPC, set default size */
+	/* dimm size - hardcoded 128Mb */
+	val = 5;
+	msr.hi &= ~(0xf << CF07_UPPER_D0_SZ_SHIFT);
+	msr.hi |=  (val << CF07_UPPER_D0_SZ_SHIFT);
+
+	/* page size = 2^col address */
+	val = 2; /* 4096 bytes */
+	msr.hi &= ~(0x7 << CF07_UPPER_D0_PSZ_SHIFT);
+	msr.hi |=  (val << CF07_UPPER_D0_PSZ_SHIFT);
+
+	print_debug("computed msr.hi ");
+	print_debug_hex32(msr.hi);
+	print_debug("\r\n");
+
+	/* this is a standard value, DOES NOT PROBABLY MATCH FROM ABOVE */
+	/* well, it may be close. It's about 200,000 ticks */
+	msr.lo = 0x00003000;
+	wrmsr(MC_CF07_DATA, msr);
+
+#endif
+	
+	msr.hi = 0x00005012;
+	msr.lo = 0x05000040;
+	
+	wrmsr(MC_CF07_DATA, msr);		//GX3
+
+	/* timing and mode ... */
+
+	//msr = rdmsr(0x20000019);
+	
+	/* per standard bios settings */	
+/*
+	msr.hi = 0x18000108;
+	msr.lo = 
+			(6<<28) |		// cas_lat
+			(10<<24)|		// ref2act
+			(7<<20)|		// act2pre
+			(3<<16)|		// pre2act
+			(3<<12)|		// act2cmd
+			(2<<8)|			// act2act
+			(2<<6)|			// dplwr
+			(2<<4)|			// dplrd
+			(3);			// dal
+	* the msr value reported by quanta is very, very different. 
+	 * we will go with that value for now. 
+	 *
+	//msr.lo = 0x286332a3;
+*/
+	//wrmsr(0x20000019, msr);	//GX3
+
+}
+
+#include "northbridge/amd/lx/raminit.c"
+#include "sdram/generic_sdram.c"
+
+#define PLLMSRhi 0x00001490
+#define PLLMSRlo 0x02000030
+#define PLLMSRlo1 ((0xde << 16) | (1 << 26) | (1 << 24))
+#define PLLMSRlo2 ((1<<14) |(1<<13) | (1<<0))
+#include "northbridge/amd/lx/pll_reset.c"
+#include "cpu/amd/model_lx/cpureginit.c"
+#include "cpu/amd/model_lx/syspreinit.c"
+static void msr_init(void)
+{
+	__builtin_wrmsr(0x1808,  0x10f3bf00, 0x22fffc02);
+
+	__builtin_wrmsr(0x10000020, 0xfff80, 0x20000000);
+        __builtin_wrmsr(0x10000021, 0x80fffe0, 0x20000000);
+
+        __builtin_wrmsr(0x40000020, 0xfff80, 0x20000000);
+        __builtin_wrmsr(0x40000021, 0x80fffe0, 0x20000000);
+}
+
+	
+static void main(unsigned long bist)
+{
+	static const struct mem_controller memctrl [] = {
+		{.channel0 = {(0xa<<3)|0, (0xa<<3)|1}}
+	};
+
+	SystemPreInit();			//GX3 OK
+
+	msr_init();					//GX3 OK
+
+	cs5536_early_setup();		//GX3 OK
+
+	/* NOTE: must do this AFTER the early_setup!
+	 * it is counting on some early MSR setup
+	 * for cs5536
+	 */
+	cs5536_setup_onchipuart();	//GX3 OK
+
+	uart_init();				//GX3 OK
+	console_init();				//GX3 OK
+
+	pll_reset();				//GX3 OK
+
+	cpuRegInit();				//GX3 OK
+
+	print_err("done cpuRegInit\n");
+	
+	sdram_initialize(1, memctrl);	//GX3 OK almost
+	
+	/* Check all of memory */
+	//ram_check(0x00000000, 640*1024);
+}