Kconfig!

Works on Kontron, qemu, and serengeti. 

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>

tested on abuild only. 

Acked-by: Ronald G. Minnich <rminnich@gmail.com>




git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4534 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

4 files changed, 164 insertions, 0 deletions

diff --git a/src/mainboard/digitallogic/Kconfig b/src/mainboard/digitallogic/Kconfig
new file mode 100644
index 0000000000..792d600548
--- /dev/null
+++ b/src/mainboard/digitallogic/Kconfig
@@ -0,0 +1 @@
+#
diff --git a/src/mainboard/digitallogic/adl855pc/devicetree.cb b/src/mainboard/digitallogic/adl855pc/devicetree.cb
new file mode 100644
index 0000000000..f0106b0648
--- /dev/null
+++ b/src/mainboard/digitallogic/adl855pc/devicetree.cb
@@ -0,0 +1,61 @@
+chip northbridge/intel/i855pm
+	device pci_domain 0 on 
+		device pci 0.0 on end
+		device pci 1.0 on end
+		chip southbridge/intel/i82801dbm
+#			pci 11.0 on end
+#			pci 11.1 on end
+#			pci 11.2 on end
+#			pci 11.3 on end
+#			pci 11.4 on end
+#			pci 11.5 on end
+#			pci 11.6 on end
+#			pci 12.0 on end
+			register "enable_usb" = "0"
+			register "enable_native_ide" = "0"
+			register "enable_usb" = "0"
+			register "enable_native_ide" = "0"
+			chip superio/winbond/w83627hf # link 1
+                	        device pnp 2e.0 on      #  Floppy
+                	                 io 0x60 = 0x3f0
+                	                irq 0x70 = 6
+                	                drq 0x74 = 2
+				end
+                	        device pnp 2e.1 off     #  Parallel Port
+                	                 io 0x60 = 0x378
+                	                irq 0x70 = 7
+				end
+                	        device pnp 2e.2 on      #  Com1
+                	                 io 0x60 = 0x3f8
+                	                irq 0x70 = 4
+				end
+                	        device pnp 2e.3 off     #  Com2
+                	                io 0x60 = 0x2f8
+                	                irq 0x70 = 3
+				end
+                	        device pnp 2e.5 on      #  Keyboard
+                	                 io 0x60 = 0x60
+                	                 io 0x62 = 0x64
+                	                irq 0x70 = 1
+					irq 0x72 = 12
+				end
+                	        device pnp 2e.6 off end #  CIR
+                	        device pnp 2e.7 off end #  GAME_MIDI_GIPO1
+                	        device pnp 2e.8 off end #  GPIO2
+                	        device pnp 2e.9 off end #  GPIO3
+                	        device pnp 2e.a off end #  ACPI
+                	        device pnp 2e.b on      #  HW Monitor
+ 					 io 0x60 = 0x290
+				end
+				register "com1" = "{1}"
+			#	register "com1" = "{1, 0, 0x3f8, 4}"
+			#	register "lpt" = "{1}"
+                	end
+		end
+	end
+	device apic_cluster 0 on 
+		chip cpu/intel/socket_mPGA479M
+			device apic 0 on end
+		end
+	end
+end
diff --git a/src/mainboard/digitallogic/msm586seg/devicetree.cb b/src/mainboard/digitallogic/msm586seg/devicetree.cb
new file mode 100644
index 0000000000..30606b5b7e
--- /dev/null
+++ b/src/mainboard/digitallogic/msm586seg/devicetree.cb
@@ -0,0 +1,16 @@
+chip cpu/amd/sc520
+	device pci_domain 0 on 
+		device pci 0.0 on end
+	
+		chip drivers/pci/onboard
+			device pci 12.0 on end # enet
+		end
+		chip drivers/pci/onboard
+			device pci 14.0 on end # 69000
+			register "rom_address" = "0x2000000"
+		end
+#		register "com1" = "{1}"
+#		register "com1" = "{1, 0, 0x3f8, 4}"
+	end
+
+end
diff --git a/src/mainboard/digitallogic/msm800sev/devicetree.cb b/src/mainboard/digitallogic/msm800sev/devicetree.cb
new file mode 100644
index 0000000000..9636dee678
--- /dev/null
+++ b/src/mainboard/digitallogic/msm800sev/devicetree.cb
@@ -0,0 +1,86 @@
+chip northbridge/amd/lx
+  	device pci_domain 0 on 
+    		device pci 1.0 on end
+		device pci 1.1 on end
+      		chip southbridge/amd/cs5536
+			# IRQ 12 and 1 unmasked,  Keyboard and Mouse IRQs. OK
+			# SIRQ Mode = Active(Quiet) mode. Save power....
+			# Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK
+			# How to get these? Boot linux and do this:
+			# rdmsr 0x51400025
+			register "lpc_serirq_enable" = "0x0000105a"
+			# rdmsr 0x5140004e -- polairy is high 16 bits of low 32 bits
+			register "lpc_serirq_polarity" = "0x0000EFA5"
+			# mode is high 10 bits (determined from code)
+			register "lpc_serirq_mode" = "1"
+			# Don't yet know how to find this.
+			register "enable_gpio_int_route" = "0x0D0C0700"
+			register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash
+			register "enable_USBP4_device" = "0"	#0: host, 1:device
+			register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381)
+			register "com1_enable" = "0"
+			register "com1_address" = "0x3F8"
+			register "com1_irq" = "4"
+			register "com2_enable" = "0"
+			register "com2_address" = "0x2F8"
+			register "com2_irq" = "3"
+			register "unwanted_vpci[0]" = "0"	# End of list has a zero
+        			device pci f.0 on	# ISA Bridge
+				chip superio/winbond/w83627hf
+					device pnp 2e.0 off #  Floppy
+						io 0x60 = 0x3f0
+						irq 0x70 = 6
+						drq 0x74 = 2
+					end
+					device pnp 2e.1 off #  Parallel Port
+						io 0x60 = 0x378
+						irq 0x70 = 7
+					end
+					device pnp 2e.2 on #  Com1
+						io 0x60 = 0x3f8
+						irq 0x70 = 4
+					end
+					device pnp 2e.3 on #  Com2
+						io 0x60 = 0x2f8
+						irq 0x70 = 3
+					end
+					device pnp 2e.5 on #  Keyboard
+						io 0x60 = 0x60
+						io 0x62 = 0x64
+						irq 0x70 = 1
+						irq 0x72 = 12
+					end
+					device pnp 2e.6 off #  CIR
+						io 0x60 = 0x100
+					end
+					device pnp 2e.7 off #  GAME_MIDI_GIPO1
+						io 0x60 = 0x220
+						io 0x62 = 0x300
+						irq 0x70 = 9
+					end						
+					device pnp 2e.8 off end #  GPIO2
+					device pnp 2e.9 off end #  GPIO3
+					device pnp 2e.a off end #  ACPI
+					device pnp 2e.b on #  HW Monitor
+						io 0x60 = 0x290
+						irq 0x70 = 5
+					end
+				end
+			end
+			device pci f.1 on end	# Flash controller
+			device pci f.2 on end	# IDE controller
+        			device pci f.3 on end 	# Audio
+        			device pci f.4 on end	# OHCI
+			device pci f.5 on end	# EHCI
+      		end
+	end
+
+	# APIC cluster is late CPU init.
+	device apic_cluster 0 on
+		chip cpu/amd/model_lx
+			device apic 0 on end
+		end
+	end
+
+end
+