diff options
author | Ronald G. Minnich <rminich@gmail.com> | 2009-10-02 15:46:10 +0000 |
---|---|---|
committer | Myles Watson <mylesgw@gmail.com> | 2009-10-02 15:46:10 +0000 |
commit | 1c53d771c12cb01ec9e2a0e73bf183a28aca9414 (patch) | |
tree | 1c3198df943984406fdcdba6f161b6171ce05e05 /src/mainboard/embeddedplanet | |
parent | 6cc9c0ad28e0de786015691a10bc3f6588a27366 (diff) | |
download | coreboot-1c53d771c12cb01ec9e2a0e73bf183a28aca9414.tar.xz |
Remove the Embedded Planet board.
Signed-off-by: Ronald G. Minnich <rminich@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4710 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/mainboard/embeddedplanet')
-rw-r--r-- | src/mainboard/embeddedplanet/Kconfig | 1 | ||||
-rw-r--r-- | src/mainboard/embeddedplanet/ep405pc/Config.lb | 27 | ||||
-rw-r--r-- | src/mainboard/embeddedplanet/ep405pc/Options.lb | 153 | ||||
-rw-r--r-- | src/mainboard/embeddedplanet/ep405pc/devicetree.cb | 17 | ||||
-rwxr-xr-x | src/mainboard/embeddedplanet/ep405pc/ep405pc.cfg | 89 | ||||
-rw-r--r-- | src/mainboard/embeddedplanet/ep405pc/init.c | 114 |
6 files changed, 0 insertions, 401 deletions
diff --git a/src/mainboard/embeddedplanet/Kconfig b/src/mainboard/embeddedplanet/Kconfig deleted file mode 100644 index 792d600548..0000000000 --- a/src/mainboard/embeddedplanet/Kconfig +++ /dev/null @@ -1 +0,0 @@ -# diff --git a/src/mainboard/embeddedplanet/ep405pc/Config.lb b/src/mainboard/embeddedplanet/ep405pc/Config.lb deleted file mode 100644 index 4f7f808cec..0000000000 --- a/src/mainboard/embeddedplanet/ep405pc/Config.lb +++ /dev/null @@ -1,27 +0,0 @@ -## -## Config file for the Embedded Planet EP405PC Computing Engine -## - -## -## Early board initialization, called from ppc_main() -## -initobject init.c - -arch ppc end -chip cpu/ppc/ppc4xx - device pci_domain 0 on - device pci 0.0 on end - chip southbridge/winbond/w83c553 - device pci 9.0 on end # ISA bridge - device pci 9.1 on end # IDE contoller - end - device pci e.0 on end - end -end - -## -## Build the objects we have code for in this directory. -## - -addaction coreboot.a "$(CONFIG_CROSS_COMPILE)ranlib coreboot.a" -makedefine CFLAGS += -msoft-float diff --git a/src/mainboard/embeddedplanet/ep405pc/Options.lb b/src/mainboard/embeddedplanet/ep405pc/Options.lb deleted file mode 100644 index e91b12136b..0000000000 --- a/src/mainboard/embeddedplanet/ep405pc/Options.lb +++ /dev/null @@ -1,153 +0,0 @@ -## -## Config file for the Embedded Planet EP405PC Computing Engine -## - -uses CONFIG_PCIC0_CFGADDR -uses CONFIG_CBFS -uses CONFIG_ARCH_X86 -uses CONFIG_PCIC0_CFGDATA -uses CONFIG_ISA_IO_BASE -uses CONFIG_ISA_MEM_BASE -uses CONFIG_TTYS0_BASE -uses CONFIG_IO_BASE - -uses CONFIG_CPU_OPT -uses CONFIG_CROSS_COMPILE -uses CONFIG_HAVE_OPTION_TABLE -uses CONFIG_COMPRESS -uses CONFIG_CHIP_CONFIGURE -uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL -uses CONFIG_USE_INIT -uses CONFIG_CONSOLE_SERIAL8250 -uses CONFIG_TTYS0_BAUD CONFIG_TTYS0_DIV -uses CONFIG_NO_POST -uses CONFIG_IDE -uses CONFIG_FS_PAYLOAD -uses CONFIG_FS_EXT2 -uses CONFIG_FS_ISO9660 -uses CONFIG_FS_FAT -uses CONFIG_COMPRESSED_PAYLOAD_LZMA -uses CONFIG_PRECOMPRESSED_PAYLOAD -uses CONFIG_AUTOBOOT_CMDLINE -uses CONFIG_SYS_CLK_FREQ -uses CONFIG_IDE_BOOT_DRIVE -#uses CONFIG_IDE_SWAB -uses CONFIG_IDE_OFFSET -uses CONFIG_ROM_SIZE -uses CONFIG_ROM_IMAGE_SIZE -uses CONFIG_RESET -uses CONFIG_EXCEPTION_VECTORS -uses CONFIG_ROMBASE -uses CONFIG_ROMSTART -uses CONFIG_RAMBASE -#uses CONFIG_RAMSTART -uses CONFIG_EMBEDDED_RAM_SIZE -uses CONFIG_STACK_SIZE CONFIG_HEAP_SIZE - -uses CONFIG_MAINBOARD -uses CONFIG_MAINBOARD_VENDOR -uses CONFIG_MAINBOARD_PART_NUMBER -uses COREBOOT_EXTRA_VERSION -uses CONFIG_CROSS_COMPILE -uses CC -uses HOSTCC -uses CONFIG_OBJCOPY - -## -## Set PCI configuration register addresses -## -default CONFIG_PCIC0_CFGADDR=0xeec00000 -default CONFIG_PCIC0_CFGDATA=0xeec00004 - -## -## Set PCI/ISA I/O and memory base address -## -default CONFIG_ISA_IO_BASE=0xe8000000 -default CONFIG_ISA_MEM_BASE=0x80000000 -default CONFIG_IO_BASE=CONFIG_ISA_IO_BASE - -## -## HACK ALERT: the UART0 registers are not in the PCI I/O address space -## but both IDE and UART use the same routines for I/O (inb/outb). To get -## around this we set TTYSO_BASE to the difference between the two. -## -default CONFIG_TTYS0_BASE=0xef600300-CONFIG_ISA_IO_BASE - -## Enable PPC405 instructions -default CONFIG_CPU_OPT="-mcpu=405" -#default CONFIG_CPU_OPT="" -default CONFIG_ARCH_X86=0 - -## Use stage 1 initialization code -default CONFIG_USE_INIT=1 - -## Use chip configuration -default CONFIG_CHIP_CONFIGURE=1 - -## We don't use compressed image -default CONFIG_COMPRESS=0 - -## Turn off POST codes -default CONFIG_NO_POST=1 - -## Enable serial console -default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 -default CONFIG_CONSOLE_SERIAL8250=1 -# Divisor of 69 == 9600 baud due to weird clocking -default CONFIG_TTYS0_DIV=69 -default CONFIG_TTYS0_BAUD=9600 - -## Boot linux from IDE -default CONFIG_IDE=1 -default CONFIG_FS_PAYLOAD=1 -default CONFIG_FS_EXT2=1 -default CONFIG_FS_ISO9660=1 -default CONFIG_FS_FAT=1 -default CONFIG_AUTOBOOT_CMDLINE="hda1:/vmlinuz" - -default CONFIG_ROM_SIZE=1048576 -default CONFIG_ROM_IMAGE_SIZE=160*1024 - -## Board has fixed size RAM -default CONFIG_EMBEDDED_RAM_SIZE=64*1024*1024 - -## Coreboot C code runs at this location in RAM -default CONFIG_RAMBASE=0x00100000 - -## -## Use a 64K stack -## -default CONFIG_STACK_SIZE=0x10000 - -## -## Use a 64K heap -## -default CONFIG_HEAP_SIZE=0x10000 - -## -## System clock -## -default CONFIG_SYS_CLK_FREQ=33 - -## -default CONFIG_ROMBASE=0xfff00000 - -## Reset vector address -default CONFIG_RESET=0xfffffffc - -## Exception vectors -default CONFIG_EXCEPTION_VECTORS=CONFIG_ROMBASE+0x100 - -## coreboot ROM start address -default CONFIG_ROMSTART=0xfff03000 - -## coreboot C code runs at this location in RAM -default CONFIG_RAMBASE=0x00100000 - -### End Options.lb -# -# CBFS -# -# -default CONFIG_CBFS=1 -end diff --git a/src/mainboard/embeddedplanet/ep405pc/devicetree.cb b/src/mainboard/embeddedplanet/ep405pc/devicetree.cb deleted file mode 100644 index b6f5329f53..0000000000 --- a/src/mainboard/embeddedplanet/ep405pc/devicetree.cb +++ /dev/null @@ -1,17 +0,0 @@ -chip cpu/ppc/ppc4xx - device pci_domain 0 on - device pci 0.0 on end - chip southbridge/winbond/w83c553 - device pci 9.0 on end # ISA bridge - device pci 9.1 on end # IDE contoller - end - device pci e.0 on end - end -end - -## -## Build the objects we have code for in this directory. -## - -addaction coreboot.a "$(CONFIG_CROSS_COMPILE)ranlib coreboot.a" -makedefine CFLAGS += -msoft-float diff --git a/src/mainboard/embeddedplanet/ep405pc/ep405pc.cfg b/src/mainboard/embeddedplanet/ep405pc/ep405pc.cfg deleted file mode 100755 index 305245d751..0000000000 --- a/src/mainboard/embeddedplanet/ep405pc/ep405pc.cfg +++ /dev/null @@ -1,89 +0,0 @@ -; bdiGDB configuration file for the Embedded Planet EP405PC -; --------------------------------------------------------- -; -[INIT] -; init core register -WSPR 954 0x00000000 ;DCWR: Disable data cache write-thru -WSPR 1018 0x00000000 ;DCCR: Disable data cache -WSPR 1019 0x00000000 ;ICCR: Disable instruction cache -WSPR 981 0x00000000 ;EVPR: Exception Vector Table @0x00000000 - -; Setup SDRAM Controller -WDCR 16 0x00000080 ;Select SDRAM0_TR -WDCR 17 0x010E8016 ;TR: SDRAM Timing Register -WDCR 16 0x00000040 ;Select SDRAM0_B0CR -WDCR 17 0x00084001 ;Select bank 0 -WDCR 16 0x00000030 ;Select SDRAM0_RTR -WDCR 17 0x08080000 ;RTR: Refresh Timing Register -WDCR 16 0x00000094 ;Select SDRAM0_ECCCFG -WDCR 17 0x00000000 ;ECC: Disabled -WDCR 16 0x00000034 ;Select SDRAM0_PMIT -WDCR 17 0x0F000000 ;PMIT: Power Management Idle Timer -DELAY 1 ;Wait for SDRAM powerup -WDCR 16 0x00000020 ;Select SDRAM0_CFG -WDCR 17 0x80C00000 ;CFG: Enable - -; MMU -WM32 0xf0 0x00000000 ;invalidate page table base - -; EBC -WDCR 0x12 0x00000004 ;Select EBC0_B4CR -WDCR 0x13 0xF4058000 ;Set NVRTC/BCSR -WDCR 0x12 0x00000014 ;Select EBC0_B4AP -WDCR 0x13 0x04050000 ;Set NVRTC/BCSR timing -WM8 0xF4000003 0x20 ;Enable UART0 -WM8 0xF4000009 0x07 ;LED -DELAY 500 -WM8 0xF4000009 0x0b ;LED -DELAY 500 -WM8 0xF4000009 0x0d ;LED -DELAY 500 -WM8 0xF4000009 0x0e ;LED -DELAY 500 - -[TARGET] -JTAGCLOCK 0 ;use 16 MHz JTAG clock -CPUTYPE 405 ;the used target CPU type -BDIMODE AGENT ;the BDI working mode (LOADONLY | AGENT) -;WAKEUP 3000 ;wakeup time after reset -BREAKMODE HARD ;SOFT or HARD, HARD uses PPC hardware breakpoint -STEPMODE JTAG ;JTAG or HWBP, HWPB uses one or two hardware breakpoints -VECTOR CATCH ;catch unhandled exceptions -MMU XLAT 0xC0000000 ;enable virtual address mode -PTBASE 0x000000f0 ;address where kernel/user stores pointer to page table -SIO 2002 9600 ;TCP port for serial IO -;SIO 2002 115200 ;TCP port for serial IO - -;REGLIST SPR ;select register to transfer to GDB -;REGLIST ALL ;select register to transfer to GDB -;SCANPRED 2 2 ;JTAG devices connected before PPC400 -;SCANSUCC 3 3 ;JTAG devices connected after PPC400 - -[HOST] -IP 10.0.1.2 -FORMAT ELF -FILE coreboot.elf -;START 0x200000 -LOAD MANUAL ;load code MANUAL or AUTO after reset -DEBUGPORT 2001 -DUMP dump.bin ;Linux: dump.bin must already exist and public writable - -[FLASH] -WORKSPACE 0x00004000 ;workspace in target RAM for fast programming algorithm -CHIPTYPE AM29BX16 ;Flash type (AM29F | AM29BX8 | AM29BX16 | I28BX8 | I28BX16) -CHIPSIZE 0x400000 ;The size of one flash chip in bytes (e.g. AM29F040 = 0x80000) -BUSWIDTH 16 ;The width of the flash memory bus in bits (8 | 16 | 32) -ERASE 0xFFF80000 ;erase sector 0 of flash in U7 (AM29F040) -ERASE 0xFFF90000 ;erase sector 1 of flash -ERASE 0xFFFA0000 ;erase sector 2 of flash -ERASE 0xFFFB0000 ;erase sector 3 of flash -ERASE 0xFFFC0000 ;erase sector 4 of flash -ERASE 0xFFFD0000 ;erase sector 5 of flash -ERASE 0xFFFE0000 ;erase sector 6 of flash -ERASE 0xFFFF0000 ;erase sector 7 of flash - -[REGS] -IDCR1 0x010 0x011 ;MEMCFGADR and MEMCFGDATA -IDCR2 0x012 0x013 ;EBCCFGADR and EBCCFGDATA -IDCR3 0x014 0x015 ;KIAR and KIDR -FILE reg405gp.def diff --git a/src/mainboard/embeddedplanet/ep405pc/init.c b/src/mainboard/embeddedplanet/ep405pc/init.c deleted file mode 100644 index 6148d89c4a..0000000000 --- a/src/mainboard/embeddedplanet/ep405pc/init.c +++ /dev/null @@ -1,114 +0,0 @@ -/* - * Copyright (C) 2003, Greg Watson <gwatson@lanl.gov> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -/* - * Do very early board initialization: - * - * - Configure External Bus (EBC) - * - Setup Flash - * - Setup NVRTC - * - Setup Board Control and Status Registers (BCSR) - * - Enable UART0 for debugging - */ - -#include <ppc_asm.tmpl> -#include <ppc.h> -#include <ppc4xx.h> -#include <arch/io.h> -#include <timer.h> - -void -board_init(void) -{ - /* - * Configure Inerrupt Controller - */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr(uicer, 0x00000000); /* disable all ints */ - mtdcr(uiccr, 0x00000000); /* set all to be non-critical */ - mtdcr(uicpr, 0xFFFFFF80); /* set int polarities */ - mtdcr(uictr, 0x10000000); /* set int trigger levels */ - mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest pri */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - - /* - * Configure FLASH - */ - mtebc(pb0cr, 0xFC0DC000); - mtebc(pb0ap, 0x02000000); - - /* - * Configure NVTRC/BCSR - */ - mtebc(pb4cr, 0xF4058000); - mtebc(pb4ap, 0x04050000); - - /* - * Board Control and Status Register (BCSR) setup - */ - - /* - * BCSR1 - PCI Control - */ - out_8((unsigned char *)0xF4000001, 0x80); - - /* - * BCSR2 - FLASH, NVRAM and POR Control - */ - out_8((unsigned char *)0xF4000002, 0x9C); - - /* - * BCSR3 - FENET and UART - */ - out_8((unsigned char *)0xF4000003, 0xf0); - - /* - * BCSR4 - PCI Status and Masking - */ - out_8((unsigned char *)0xF4000004, 0x00); - - /* - * BCSR5 - XIRQ Select - */ - out_8((unsigned char *)0xF4000005, 0x00); - - /* - * BCSR6 - XIRQ Routing - */ - out_8((unsigned char *)0xF4000006, 0x07); - - /* - * Cycle LEDs to show something is happening... - */ - out_8((unsigned char *)0xF4000009, 0x07); - udelay(100000); - out_8((unsigned char *)0xF4000009, 0x0B); - udelay(100000); - out_8((unsigned char *)0xF4000009, 0x0D); - udelay(100000); - out_8((unsigned char *)0xF4000009, 0x0E); -} - -void -board_init2(void) -{ -} |