nb/intel/x4x: Move boilerplate romstage to a common location

This adds 3 mb romstage callbacks:
 - void mb_lpc_setup(void) to be used to set up the superio
 - void mb_get_spd_map(u8 spd_map[4]) to get I2C addresses of SPDs
 - (optional)mb_pre_raminit_setup(int s3_resume) to set up mainboard
 specific things before the raminit.

Change-Id: Ic3b838856b3076ed05eeeea7c0656c2078462272
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36758
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

1 files changed, 7 insertions, 42 deletions

diff --git a/src/mainboard/foxconn/g41s-k/romstage.c b/src/mainboard/foxconn/g41s-k/romstage.c
index 45ff7e458e..b4bd77d78b 100644
--- a/src/mainboard/foxconn/g41s-k/romstage.c
+++ b/src/mainboard/foxconn/g41s-k/romstage.c
@@ -16,20 +16,15 @@
  * GNU General Public License for more details.
  */
 
-#include <console/console.h>
-#include <arch/romstage.h>
-#include <device/pci_ops.h>
 #include <northbridge/intel/x4x/x4x.h>
-#include <southbridge/intel/common/pmclib.h>
 #include <southbridge/intel/i82801gx/i82801gx.h>
 #include <superio/ite/common/ite.h>
 #include <superio/ite/it8720f/it8720f.h>
 
-#define LPC_DEV PCI_DEV(0, 0x1f, 0)
 #define SERIAL_DEV PNP_DEV(0x2e, IT8720F_SP1)
 #define GPIO_DEV PNP_DEV(0x2e, IT8720F_GPIO)
 
-static void mb_lpc_setup(void)
+void mb_lpc_setup(void)
 {
 	/* Set up GPIOs on Super I/O. */
 	ite_reg_write(GPIO_DEV, 0x25, 0x01);
@@ -55,43 +50,13 @@ static void mb_lpc_setup(void)
 	RCBA16(D29IR) = 0x0237;
 
 	RCBA32(FD) |= FD_INTLAN;
-}
-
-void mainboard_romstage_entry(void)
-{
-	//                          ch0      ch1
-#if CONFIG(BOARD_FOXCONN_G41S_K)
-	const u8 spd_addrmap[4] = { 0x50, 0, 0, 0 };
-#else
-	/* TODO adapt raminit such that other slots can be used
-	 * for single rank dimms */
-	const u8 spd_addrmap[4] = { 0x50, 0, 0x52, 0 };
-#endif
-	u8 boot_path = 0;
-	u8 s3_resume;
 
-	/* Set up southbridge and Super I/O GPIOs. */
-	i82801gx_lpc_setup();
-	mb_lpc_setup();
 	ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+}
 
-	console_init();
-
-	enable_smbus();
-
-	i82801gx_early_init();
-	x4x_early_init();
-
-	s3_resume = southbridge_detect_s3_resume();
-	if (s3_resume)
-		boot_path = BOOT_PATH_RESUME;
-	if (MCHBAR32(PMSTS_MCHBAR) & PMSTS_WARM_RESET)
-		boot_path = BOOT_PATH_WARM_RESET;
-
-	sdram_initialize(boot_path, spd_addrmap);
-
-	x4x_late_init(s3_resume);
-
-	printk(BIOS_DEBUG, "x4x late init complete\n");
-
+void mb_get_spd_map(u8 spd_map[4])
+{
+	spd_map[0] = 0x50;
+	if (CONFIG(BOARD_FOXCONN_G41M))
+		spd_map[2] = 0x52;
 }