amdfam10: Move to per-device ACPI

Change-Id: I9ce2333e1ea527843f83d411dea2a669263156c2
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7027
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>

3 files changed, 0 insertions, 501 deletions

diff --git a/src/mainboard/gigabyte/ma785gm/acpi_tables.c b/src/mainboard/gigabyte/ma785gm/acpi_tables.c
index 4c0cb7760c..df89e8c5f9 100644
--- a/src/mainboard/gigabyte/ma785gm/acpi_tables.c
+++ b/src/mainboard/gigabyte/ma785gm/acpi_tables.c
@@ -29,16 +29,6 @@
 
 #include "mb_sysconf.h"
 
-extern const unsigned char AmlCode[];
-extern const unsigned char AmlCode_ssdt[];
-
-#if CONFIG_ACPI_SSDTX_NUM >= 1
-extern const unsigned char AmlCode_ssdt2[];
-extern const unsigned char AmlCode_ssdt3[];
-extern const unsigned char AmlCode_ssdt4[];
-extern const unsigned char AmlCode_ssdt5[];
-#endif
-
 unsigned long acpi_fill_madt(unsigned long current)
 {
 	/* create all subtables for processors */
@@ -63,160 +53,3 @@ unsigned long acpi_fill_madt(unsigned long current)
 
 	return current;
 }
-
-unsigned long write_acpi_tables(unsigned long start)
-{
-	unsigned long current;
-	acpi_rsdp_t *rsdp;
-	acpi_rsdt_t *rsdt;
-	acpi_hpet_t *hpet;
-	acpi_madt_t *madt;
-	acpi_srat_t *srat;
-	acpi_slit_t *slit;
-	acpi_fadt_t *fadt;
-	acpi_facs_t *facs;
-	acpi_header_t *dsdt;
-	acpi_header_t *ssdt;
-#if CONFIG_ACPI_SSDTX_NUM >= 1
-	acpi_header_t *ssdtx;
-	void *p;
-	int i;
-#endif
-
-	get_bus_conf();	/* it will get sblk, pci1234, hcdn, and sbdn */
-
-	/* Align ACPI tables to 16 bytes */
-	start = ALIGN(start, 16);
-	current = start;
-
-	printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start);
-
-	/* We need at least an RSDP and an RSDT Table */
-	rsdp = (acpi_rsdp_t *) current;
-	current += sizeof(acpi_rsdp_t);
-	rsdt = (acpi_rsdt_t *) current;
-	current += sizeof(acpi_rsdt_t);
-
-	/* clear all table memory */
-	memset((void *)start, 0, current - start);
-
-	acpi_write_rsdp(rsdp, rsdt, NULL);
-	acpi_write_rsdt(rsdt);
-
-	/*
-	 * We explicitly add these tables later on:
-	 */
-	current = ALIGN(current, 8);
-	printk(BIOS_DEBUG, "ACPI:    * HPET at %lx\n", current);
-	hpet = (acpi_hpet_t *) current;
-	current += sizeof(acpi_hpet_t);
-	acpi_create_hpet(hpet);
-	acpi_add_table(rsdp, hpet);
-
-	/* If we want to use HPET Timers Linux wants an MADT */
-	current = ALIGN(current, 8);
-	printk(BIOS_DEBUG, "ACPI:    * MADT at %lx\n",current);
-	madt = (acpi_madt_t *) current;
-	acpi_create_madt(madt);
-	current += madt->header.length;
-	acpi_add_table(rsdp, madt);
-
-	/* SRAT */
-	current = ALIGN(current, 8);
-	printk(BIOS_DEBUG, "ACPI:    * SRAT at %lx\n", current);
-	srat = (acpi_srat_t *) current;
-	acpi_create_srat(srat);
-	current += srat->header.length;
-	acpi_add_table(rsdp, srat);
-
-	/* SLIT */
-	current = ALIGN(current, 8);
-	printk(BIOS_DEBUG, "ACPI:   * SLIT at %lx\n", current);
-	slit = (acpi_slit_t *) current;
-	acpi_create_slit(slit);
-	current += slit->header.length;
-	acpi_add_table(rsdp, slit);
-
-	/* SSDT */
-	current = ALIGN(current, 16);
-	printk(BIOS_DEBUG, "ACPI:    * SSDT at %lx\n", current);
-	ssdt = (acpi_header_t *)current;
-	memcpy(ssdt, &AmlCode_ssdt, sizeof(acpi_header_t));
-	current += ssdt->length;
-	memcpy(ssdt, &AmlCode_ssdt, ssdt->length);
-	//Here you need to set value in pci1234, sblk and sbdn in get_bus_conf.c
-	update_ssdt((void*)ssdt);
-	/* recalculate checksum */
-	ssdt->checksum = 0;
-	ssdt->checksum = acpi_checksum((unsigned char *)ssdt,ssdt->length);
-	acpi_add_table(rsdp,ssdt);
-
-#if CONFIG_ACPI_SSDTX_NUM >= 1
-
-	/* same htio, but different position? We may have to copy,
-	change HCIN, and recalculate the checknum and add_table */
-
-	for(i=1;i<sysconf.hc_possible_num;i++) {  // 0: is hc sblink
-		if((sysconf.pci1234[i] & 1) != 1 ) continue;
-		u8 c;
-		if (i < 7) {
-			c = (u8) ('4' + i - 1);
-		} else {
-			c = (u8) ('A' + i - 1 - 6);
-		}
-		current = ALIGN(current, 8);
-		printk(BIOS_DEBUG, "ACPI:    * SSDT for PCI%c at %lx\n", c, current); //pci0 and pci1 are in dsdt
-		ssdtx = (acpi_header_t *)current;
-		switch (sysconf.hcid[i]) {
-		case 1:
-			p = &AmlCode_ssdt2;
-			break;
-		case 2:
-			p = &AmlCode_ssdt3;
-			break;
-		case 3:	/* 8131 */
-			p = &AmlCode_ssdt4;
-			break;
-		default:
-			/* HTX no io apic */
-			p = &AmlCode_ssdt5;
-			break;
-		}
-		memcpy(ssdtx, p, sizeof(acpi_header_t));
-		current += ssdtx->length;
-		memcpy(ssdtx, p, ssdtx->length);
-		update_ssdtx((void *)ssdtx, i);
-		ssdtx->checksum = 0;
-		ssdtx->checksum = acpi_checksum((u8 *)ssdtx, ssdtx->length);
-		acpi_add_table(rsdp, ssdtx);
-	}
-#endif
-
-	/* DSDT */
-	current = ALIGN(current, 8);
-	printk(BIOS_DEBUG, "ACPI:    * DSDT at %lx\n", current);
-	dsdt = (acpi_header_t *)current; // it will used by fadt
-	memcpy(dsdt, &AmlCode, sizeof(acpi_header_t));
-	current += dsdt->length;
-	memcpy(dsdt, &AmlCode, dsdt->length);
-	printk(BIOS_DEBUG, "ACPI:    * DSDT @ %p Length %x\n",dsdt,dsdt->length);
-
-	/* FACS */ // it needs 64 bit alignment
-	current = ALIGN(current, 8);
-	printk(BIOS_DEBUG, "ACPI:	* FACS at %lx\n", current);
-	facs = (acpi_facs_t *) current; // it will be used by fadt
-	current += sizeof(acpi_facs_t);
-	acpi_create_facs(facs);
-
-	/* FADT */
-	current = ALIGN(current, 8);
-	printk(BIOS_DEBUG, "ACPI:    * FADT at %lx\n", current);
-	fadt = (acpi_fadt_t *) current;
-	current += sizeof(acpi_fadt_t);
-
-	acpi_create_fadt(fadt, facs, dsdt);
-	acpi_add_table(rsdp, fadt);
-
-	printk(BIOS_INFO, "ACPI: done.\n");
-	return current;
-}
diff --git a/src/mainboard/gigabyte/ma785gmt/acpi_tables.c b/src/mainboard/gigabyte/ma785gmt/acpi_tables.c
index a9e72ebd15..50574423b2 100644
--- a/src/mainboard/gigabyte/ma785gmt/acpi_tables.c
+++ b/src/mainboard/gigabyte/ma785gmt/acpi_tables.c
@@ -27,16 +27,6 @@
 #include <cpu/amd/mtrr.h>
 #include <cpu/amd/amdfam10_sysconf.h>
 
-extern const unsigned char AmlCode[];
-extern const unsigned char AmlCode_ssdt[];
-
-#if CONFIG_ACPI_SSDTX_NUM >= 1
-extern const unsigned char AmlCode_ssdt2[];
-extern const unsigned char AmlCode_ssdt3[];
-extern const unsigned char AmlCode_ssdt4[];
-extern const unsigned char AmlCode_ssdt5[];
-#endif
-
 unsigned long acpi_fill_madt(unsigned long current)
 {
 	/* create all subtables for processors */
@@ -61,160 +51,3 @@ unsigned long acpi_fill_madt(unsigned long current)
 
 	return current;
 }
-
-unsigned long write_acpi_tables(unsigned long start)
-{
-	unsigned long current;
-	acpi_rsdp_t *rsdp;
-	acpi_rsdt_t *rsdt;
-	acpi_hpet_t *hpet;
-	acpi_madt_t *madt;
-	acpi_srat_t *srat;
-	acpi_slit_t *slit;
-	acpi_fadt_t *fadt;
-	acpi_facs_t *facs;
-	acpi_header_t *dsdt;
-	acpi_header_t *ssdt;
-#if CONFIG_ACPI_SSDTX_NUM >= 1
-	acpi_header_t *ssdtx;
-	void *p;
-	int i;
-#endif
-
-	get_bus_conf();	/* it will get sblk, pci1234, hcdn, and sbdn */
-
-	/* Align ACPI tables to 16 bytes */
-	start = ALIGN(start, 16);
-	current = start;
-
-	printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start);
-
-	/* We need at least an RSDP and an RSDT Table */
-	rsdp = (acpi_rsdp_t *) current;
-	current += sizeof(acpi_rsdp_t);
-	rsdt = (acpi_rsdt_t *) current;
-	current += sizeof(acpi_rsdt_t);
-
-	/* clear all table memory */
-	memset((void *)start, 0, current - start);
-
-	acpi_write_rsdp(rsdp, rsdt, NULL);
-	acpi_write_rsdt(rsdt);
-
-	/*
-	 * We explicitly add these tables later on:
-	 */
-	current = ALIGN(current, 8);
-	printk(BIOS_DEBUG, "ACPI:    * HPET at %lx\n", current);
-	hpet = (acpi_hpet_t *) current;
-	current += sizeof(acpi_hpet_t);
-	acpi_create_hpet(hpet);
-	acpi_add_table(rsdp, hpet);
-
-	/* If we want to use HPET Timers Linux wants an MADT */
-	current = ALIGN(current, 8);
-	printk(BIOS_DEBUG, "ACPI:    * MADT at %lx\n",current);
-	madt = (acpi_madt_t *) current;
-	acpi_create_madt(madt);
-	current += madt->header.length;
-	acpi_add_table(rsdp, madt);
-
-	/* SRAT */
-	current = ALIGN(current, 8);
-	printk(BIOS_DEBUG, "ACPI:    * SRAT at %lx\n", current);
-	srat = (acpi_srat_t *) current;
-	acpi_create_srat(srat);
-	current += srat->header.length;
-	acpi_add_table(rsdp, srat);
-
-	/* SLIT */
-	current = ALIGN(current, 8);
-	printk(BIOS_DEBUG, "ACPI:   * SLIT at %lx\n", current);
-	slit = (acpi_slit_t *) current;
-	acpi_create_slit(slit);
-	current += slit->header.length;
-	acpi_add_table(rsdp, slit);
-
-	/* SSDT */
-	current = ALIGN(current, 16);
-	printk(BIOS_DEBUG, "ACPI:    * SSDT at %lx\n", current);
-	ssdt = (acpi_header_t *)current;
-	memcpy(ssdt, &AmlCode_ssdt, sizeof(acpi_header_t));
-	current += ssdt->length;
-	memcpy(ssdt, &AmlCode_ssdt, ssdt->length);
-	//Here you need to set value in pci1234, sblk and sbdn in get_bus_conf.c
-	update_ssdt((void*)ssdt);
-	/* recalculate checksum */
-	ssdt->checksum = 0;
-	ssdt->checksum = acpi_checksum((unsigned char *)ssdt,ssdt->length);
-	acpi_add_table(rsdp,ssdt);
-
-#if CONFIG_ACPI_SSDTX_NUM >= 1
-
-	/* same htio, but different position? We may have to copy,
-	change HCIN, and recalculate the checknum and add_table */
-
-	for(i=1;i<sysconf.hc_possible_num;i++) {  // 0: is hc sblink
-		if((sysconf.pci1234[i] & 1) != 1 ) continue;
-		u8 c;
-		if (i < 7) {
-			c = (u8) ('4' + i - 1);
-		} else {
-			c = (u8) ('A' + i - 1 - 6);
-		}
-		current = ALIGN(current, 8);
-		printk(BIOS_DEBUG, "ACPI:    * SSDT for PCI%c at %lx\n", c, current); //pci0 and pci1 are in dsdt
-		ssdtx = (acpi_header_t *)current;
-		switch (sysconf.hcid[i]) {
-		case 1:
-			p = &AmlCode_ssdt2;
-			break;
-		case 2:
-			p = &AmlCode_ssdt3;
-			break;
-		case 3:	/* 8131 */
-			p = &AmlCode_ssdt4;
-			break;
-		default:
-			/* HTX no io apic */
-			p = &AmlCode_ssdt5;
-			break;
-		}
-		memcpy(ssdtx, p, sizeof(acpi_header_t));
-		current += ssdtx->length;
-		memcpy(ssdtx, p, ssdtx->length);
-		update_ssdtx((void *)ssdtx, i);
-		ssdtx->checksum = 0;
-		ssdtx->checksum = acpi_checksum((u8 *)ssdtx, ssdtx->length);
-		acpi_add_table(rsdp, ssdtx);
-	}
-#endif
-
-	/* DSDT */
-	current = ALIGN(current, 8);
-	printk(BIOS_DEBUG, "ACPI:    * DSDT at %lx\n", current);
-	dsdt = (acpi_header_t *)current; // it will used by fadt
-	memcpy(dsdt, &AmlCode, sizeof(acpi_header_t));
-	current += dsdt->length;
-	memcpy(dsdt, &AmlCode, dsdt->length);
-	printk(BIOS_DEBUG, "ACPI:    * DSDT @ %p Length %x\n",dsdt,dsdt->length);
-
-	/* FACS */ // it needs 64 bit alignment
-	current = ALIGN(current, 8);
-	printk(BIOS_DEBUG, "ACPI:	* FACS at %lx\n", current);
-	facs = (acpi_facs_t *) current; // it will be used by fadt
-	current += sizeof(acpi_facs_t);
-	acpi_create_facs(facs);
-
-	/* FADT */
-	current = ALIGN(current, 8);
-	printk(BIOS_DEBUG, "ACPI:    * FADT at %lx\n", current);
-	fadt = (acpi_fadt_t *) current;
-	current += sizeof(acpi_fadt_t);
-
-	acpi_create_fadt(fadt, facs, dsdt);
-	acpi_add_table(rsdp, fadt);
-
-	printk(BIOS_INFO, "ACPI: done.\n");
-	return current;
-}
diff --git a/src/mainboard/gigabyte/ma78gm/acpi_tables.c b/src/mainboard/gigabyte/ma78gm/acpi_tables.c
index a9e72ebd15..50574423b2 100644
--- a/src/mainboard/gigabyte/ma78gm/acpi_tables.c
+++ b/src/mainboard/gigabyte/ma78gm/acpi_tables.c
@@ -27,16 +27,6 @@
 #include <cpu/amd/mtrr.h>
 #include <cpu/amd/amdfam10_sysconf.h>
 
-extern const unsigned char AmlCode[];
-extern const unsigned char AmlCode_ssdt[];
-
-#if CONFIG_ACPI_SSDTX_NUM >= 1
-extern const unsigned char AmlCode_ssdt2[];
-extern const unsigned char AmlCode_ssdt3[];
-extern const unsigned char AmlCode_ssdt4[];
-extern const unsigned char AmlCode_ssdt5[];
-#endif
-
 unsigned long acpi_fill_madt(unsigned long current)
 {
 	/* create all subtables for processors */
@@ -61,160 +51,3 @@ unsigned long acpi_fill_madt(unsigned long current)
 
 	return current;
 }
-
-unsigned long write_acpi_tables(unsigned long start)
-{
-	unsigned long current;
-	acpi_rsdp_t *rsdp;
-	acpi_rsdt_t *rsdt;
-	acpi_hpet_t *hpet;
-	acpi_madt_t *madt;
-	acpi_srat_t *srat;
-	acpi_slit_t *slit;
-	acpi_fadt_t *fadt;
-	acpi_facs_t *facs;
-	acpi_header_t *dsdt;
-	acpi_header_t *ssdt;
-#if CONFIG_ACPI_SSDTX_NUM >= 1
-	acpi_header_t *ssdtx;
-	void *p;
-	int i;
-#endif
-
-	get_bus_conf();	/* it will get sblk, pci1234, hcdn, and sbdn */
-
-	/* Align ACPI tables to 16 bytes */
-	start = ALIGN(start, 16);
-	current = start;
-
-	printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start);
-
-	/* We need at least an RSDP and an RSDT Table */
-	rsdp = (acpi_rsdp_t *) current;
-	current += sizeof(acpi_rsdp_t);
-	rsdt = (acpi_rsdt_t *) current;
-	current += sizeof(acpi_rsdt_t);
-
-	/* clear all table memory */
-	memset((void *)start, 0, current - start);
-
-	acpi_write_rsdp(rsdp, rsdt, NULL);
-	acpi_write_rsdt(rsdt);
-
-	/*
-	 * We explicitly add these tables later on:
-	 */
-	current = ALIGN(current, 8);
-	printk(BIOS_DEBUG, "ACPI:    * HPET at %lx\n", current);
-	hpet = (acpi_hpet_t *) current;
-	current += sizeof(acpi_hpet_t);
-	acpi_create_hpet(hpet);
-	acpi_add_table(rsdp, hpet);
-
-	/* If we want to use HPET Timers Linux wants an MADT */
-	current = ALIGN(current, 8);
-	printk(BIOS_DEBUG, "ACPI:    * MADT at %lx\n",current);
-	madt = (acpi_madt_t *) current;
-	acpi_create_madt(madt);
-	current += madt->header.length;
-	acpi_add_table(rsdp, madt);
-
-	/* SRAT */
-	current = ALIGN(current, 8);
-	printk(BIOS_DEBUG, "ACPI:    * SRAT at %lx\n", current);
-	srat = (acpi_srat_t *) current;
-	acpi_create_srat(srat);
-	current += srat->header.length;
-	acpi_add_table(rsdp, srat);
-
-	/* SLIT */
-	current = ALIGN(current, 8);
-	printk(BIOS_DEBUG, "ACPI:   * SLIT at %lx\n", current);
-	slit = (acpi_slit_t *) current;
-	acpi_create_slit(slit);
-	current += slit->header.length;
-	acpi_add_table(rsdp, slit);
-
-	/* SSDT */
-	current = ALIGN(current, 16);
-	printk(BIOS_DEBUG, "ACPI:    * SSDT at %lx\n", current);
-	ssdt = (acpi_header_t *)current;
-	memcpy(ssdt, &AmlCode_ssdt, sizeof(acpi_header_t));
-	current += ssdt->length;
-	memcpy(ssdt, &AmlCode_ssdt, ssdt->length);
-	//Here you need to set value in pci1234, sblk and sbdn in get_bus_conf.c
-	update_ssdt((void*)ssdt);
-	/* recalculate checksum */
-	ssdt->checksum = 0;
-	ssdt->checksum = acpi_checksum((unsigned char *)ssdt,ssdt->length);
-	acpi_add_table(rsdp,ssdt);
-
-#if CONFIG_ACPI_SSDTX_NUM >= 1
-
-	/* same htio, but different position? We may have to copy,
-	change HCIN, and recalculate the checknum and add_table */
-
-	for(i=1;i<sysconf.hc_possible_num;i++) {  // 0: is hc sblink
-		if((sysconf.pci1234[i] & 1) != 1 ) continue;
-		u8 c;
-		if (i < 7) {
-			c = (u8) ('4' + i - 1);
-		} else {
-			c = (u8) ('A' + i - 1 - 6);
-		}
-		current = ALIGN(current, 8);
-		printk(BIOS_DEBUG, "ACPI:    * SSDT for PCI%c at %lx\n", c, current); //pci0 and pci1 are in dsdt
-		ssdtx = (acpi_header_t *)current;
-		switch (sysconf.hcid[i]) {
-		case 1:
-			p = &AmlCode_ssdt2;
-			break;
-		case 2:
-			p = &AmlCode_ssdt3;
-			break;
-		case 3:	/* 8131 */
-			p = &AmlCode_ssdt4;
-			break;
-		default:
-			/* HTX no io apic */
-			p = &AmlCode_ssdt5;
-			break;
-		}
-		memcpy(ssdtx, p, sizeof(acpi_header_t));
-		current += ssdtx->length;
-		memcpy(ssdtx, p, ssdtx->length);
-		update_ssdtx((void *)ssdtx, i);
-		ssdtx->checksum = 0;
-		ssdtx->checksum = acpi_checksum((u8 *)ssdtx, ssdtx->length);
-		acpi_add_table(rsdp, ssdtx);
-	}
-#endif
-
-	/* DSDT */
-	current = ALIGN(current, 8);
-	printk(BIOS_DEBUG, "ACPI:    * DSDT at %lx\n", current);
-	dsdt = (acpi_header_t *)current; // it will used by fadt
-	memcpy(dsdt, &AmlCode, sizeof(acpi_header_t));
-	current += dsdt->length;
-	memcpy(dsdt, &AmlCode, dsdt->length);
-	printk(BIOS_DEBUG, "ACPI:    * DSDT @ %p Length %x\n",dsdt,dsdt->length);
-
-	/* FACS */ // it needs 64 bit alignment
-	current = ALIGN(current, 8);
-	printk(BIOS_DEBUG, "ACPI:	* FACS at %lx\n", current);
-	facs = (acpi_facs_t *) current; // it will be used by fadt
-	current += sizeof(acpi_facs_t);
-	acpi_create_facs(facs);
-
-	/* FADT */
-	current = ALIGN(current, 8);
-	printk(BIOS_DEBUG, "ACPI:    * FADT at %lx\n", current);
-	fadt = (acpi_fadt_t *) current;
-	current += sizeof(acpi_fadt_t);
-
-	acpi_create_fadt(fadt, facs, dsdt);
-	acpi_add_table(rsdp, fadt);
-
-	printk(BIOS_INFO, "ACPI: done.\n");
-	return current;
-}