diff options
author | Matt DeVillier <matt.devillier@gmail.com> | 2017-08-26 06:10:18 -0500 |
---|---|---|
committer | Martin Roth <martinroth@google.com> | 2017-09-21 17:31:51 +0000 |
commit | 3b498a0b533713d8d158611863d090ac68116c4d (patch) | |
tree | b13f0688c00d01870969a805ee4bc5fb5bfcb6b2 /src/mainboard/google/cyan/variants/celes/devicetree.cb | |
parent | 6fd2e0e088f678f24554a3e29c25f9d030f2cb66 (diff) | |
download | coreboot-3b498a0b533713d8d158611863d090ac68116c4d.tar.xz |
google/celes: add new board as variant of cyan baseboard
Add support for google/celes (Samsung Chromebook 3) as
a variant of the cyan Braswell baseboard.
- Add board-specific code as the new celes variant
- Add new trackpad I2C device to the baseboard for potential
reuse by other variants
Sourced from Chromium branch firmware-celes-7287.92.B,
commit 9f0760a: Revert "Revert "soc/intel/braswell: Populate NVS SCC BAR1""
Change-Id: Id52d3c523bae7745b3dc04da012ab65c1fb37887
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/21572
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Diffstat (limited to 'src/mainboard/google/cyan/variants/celes/devicetree.cb')
-rw-r--r-- | src/mainboard/google/cyan/variants/celes/devicetree.cb | 150 |
1 files changed, 150 insertions, 0 deletions
diff --git a/src/mainboard/google/cyan/variants/celes/devicetree.cb b/src/mainboard/google/cyan/variants/celes/devicetree.cb new file mode 100644 index 0000000000..84edd74126 --- /dev/null +++ b/src/mainboard/google/cyan/variants/celes/devicetree.cb @@ -0,0 +1,150 @@ +chip soc/intel/braswell + + ############################################################ + # Set the parameters for MemoryInit + ############################################################ + + register "PcdMrcInitTsegSize" = "8" # SMM Region size in MiB + + register "PcdMrcInitMmioSize" = "0x0800" + register "PcdMrcInitSpdAddr1" = "0xa0" + register "PcdMrcInitSpdAddr2" = "0xa2" + register "PcdIgdDvmt50PreAlloc" = "1" + register "PcdApertureSize" = "2" + register "PcdGttSize" = "1" + register "PcdDvfsEnable" = "1" + register "PcdCaMirrorEn" = "1" + + ############################################################ + # Set the parameters for SiliconInit + ############################################################ + + register "PcdSdcardMode" = "PCH_ACPI_MODE" + register "PcdEnableHsuart0" = "0" + register "PcdEnableHsuart1" = "1" + register "PcdEnableAzalia" = "1" + register "PcdEnableXhci" = "1" + register "PcdEnableLpe" = "1" + register "PcdEnableDma0" = "1" + register "PcdEnableDma1" = "1" + register "PcdEnableI2C0" = "0" + register "PcdEnableI2C1" = "1" + register "PcdEnableI2C2" = "0" + register "PcdEnableI2C3" = "0" + register "PcdEnableI2C4" = "1" + register "PcdEnableI2C5" = "1" + register "PcdEnableI2C6" = "0" + register "PunitPwrConfigDisable" = "0" # Enable SVID + register "ChvSvidConfig" = "SVID_PMIC_CONFIG" + register "PcdEmmcMode" = "PCH_ACPI_MODE" + register "PcdUsb3ClkSsc" = "1" + register "PcdDispClkSsc" = "1" + register "PcdSataClkSsc" = "1" + register "PcdEnableSata" = "0" # Disable SATA + register "Usb2Port0PerPortPeTxiSet" = "7" + register "Usb2Port0PerPortTxiSet" = "5" + register "Usb2Port0IUsbTxEmphasisEn" = "2" + register "Usb2Port0PerPortTxPeHalf" = "1" + register "Usb2Port1PerPortPeTxiSet" = "7" + register "Usb2Port1PerPortTxiSet" = "3" + register "Usb2Port1IUsbTxEmphasisEn" = "2" + register "Usb2Port1PerPortTxPeHalf" = "1" + register "Usb2Port2PerPortPeTxiSet" = "7" + register "Usb2Port2PerPortTxiSet" = "3" + register "Usb2Port2IUsbTxEmphasisEn" = "2" + register "Usb2Port2PerPortTxPeHalf" = "1" + register "Usb2Port3PerPortPeTxiSet" = "7" + register "Usb2Port3PerPortTxiSet" = "3" + register "Usb2Port3IUsbTxEmphasisEn" = "2" + register "Usb2Port3PerPortTxPeHalf" = "1" + register "Usb2Port4PerPortPeTxiSet" = "7" + register "Usb2Port4PerPortTxiSet" = "3" + register "Usb2Port4IUsbTxEmphasisEn" = "2" + register "Usb2Port4PerPortTxPeHalf" = "1" + register "Usb3Lane0Ow2tapgen2deemph3p5" = "0x3a" + register "Usb3Lane1Ow2tapgen2deemph3p5" = "0x64" + register "Usb3Lane2Ow2tapgen2deemph3p5" = "0x64" + register "Usb3Lane3Ow2tapgen2deemph3p5" = "0x3a" + register "PcdSataInterfaceSpeed" = "3" + register "PcdPchSsicEnable" = "0" + register "PcdPchUsbHsicPort" = "0" + register "PcdRtcLock" = "0" # Disable RTC access locking to NVRAM + register "PMIC_I2CBus" = "1" + register "ISPEnable" = "0" # Disable IUNIT + register "ISPPciDevConfig" = "3" + register "PcdSdDetectChk" = "0" # Disable SD card detect + # Follow Intel recommendation to set BSW D-stepping PERPORTRXISET 2 (low strength) + register "D0Usb2Port0PerPortRXISet" = "2" + register "D0Usb2Port1PerPortRXISet" = "2" + register "D0Usb2Port2PerPortRXISet" = "2" + register "D0Usb2Port3PerPortRXISet" = "2" + register "D0Usb2Port4PerPortRXISet" = "2" + + # LPE audio codec settings + register "lpe_codec_clk_src" = "LPE_CLK_SRC_XTAL" # 19.2MHz clock + + # Enable devices in ACPI mode + register "lpss_acpi_mode" = "1" + register "emmc_acpi_mode" = "1" + register "sd_acpi_mode" = "1" + register "lpe_acpi_mode" = "1" + + # Disable SLP_X stretching after SUS power well fail. + register "disable_slp_x_stretch_sus_fail" = "1" + + # Allow PCIe devices to wake system from suspend + register "pcie_wake_enable" = "1" + + device cpu_cluster 0 on + device lapic 0 on end + end + device domain 0 on + # EDS Table 24-4, Figure 24-5 + device pci 00.0 on end # 8086 2280 - SoC transaction router + device pci 02.0 on end # 8086 22b0/22b1 - B1/C0 stepping Graphics and Display + device pci 03.0 off end # 8086 22b8 - Camera and Image Processor + device pci 0b.0 on end # 8086 22dc - ? + device pci 10.0 on end # 8086 2294 - MMC Port + device pci 11.0 off end # 8086 0F15 - SDIO Port + device pci 12.0 on end # 8086 0F16 - SD Port + device pci 13.0 off end # 8086 22a3 - Sata controller + device pci 14.0 on end # 8086 22b5 - USB XHCI - Only 1 USB controller at a time + device pci 15.0 on end # 8086 22a8 - LP Engine Audio + device pci 16.0 off end # 8086 22b7 - USB device + device pci 18.0 on end # 8086 22c0 - SIO - DMA + device pci 18.1 off end # 8086 22c1 - I2C Port 1 + device pci 18.2 on end # 8086 22c2 - I2C Port 2 + device pci 18.3 off end # 8086 22c3 - I2C Port 3 + device pci 18.4 off end # 8086 22c4 - I2C Port 4 + device pci 18.5 on end # 8086 22c5 - I2C Port 5 + device pci 18.6 on end # 8086 22c6 - I2C Port 6 + device pci 18.7 off end # 8086 22c7 - I2C Port 7 + device pci 1a.0 off end # 8086 0F18 - Trusted Execution Engine + device pci 1b.0 on end # 8086 0F04 - HD Audio + device pci 1c.0 on end # 8086 0000 - PCIe Root Port 1 + device pci 1c.1 off end # 8086 0000 - PCIe Root Port 2 + device pci 1c.2 on end # 8086 0000 - PCIe Root Port 3 + device pci 1c.3 off end # 8086 0000 - PCIe Root Port 4 + device pci 1e.0 on end # 8086 2286 - SIO - DMA + device pci 1e.1 off end # 8086 0F08 - PWM 1 + device pci 1e.2 off end # 8086 0F09 - PWM 2 + device pci 1e.3 on end # 8086 228a - HSUART 1 + device pci 1e.4 off end # 8086 228c - HSUART 2 + device pci 1e.5 on end # 8086 228e - SPI 1 + device pci 1e.6 off end # 8086 2290 - SPI 2 + device pci 1e.7 off end # 8086 22ac - SPI 3 + device pci 1f.0 on # 8086 229c - LPC bridge + chip drivers/pc80/tpm + # Rising edge interrupt + register "irq_polarity" = "2" + device pnp 0c31.0 on + irq 0x70 = 10 + end + end + chip ec/google/chromeec + device pnp 0c09.0 on end + end + end # LPC Bridge + device pci 1f.3 off end # 8086 0F12 - SMBus 0 + end +end |