mb/google/dedede/var/magolor: Add device settings

Add the configuration in device tree:
1. Add HDA,speaker codec and speaker amp setting
2. Add Elan and Goodix touchscreen setting
3. Add user facing camera usb setting
4  Add Synaptics and Elan Touchpad setting
5. Add WiFi configuration

BUG=None
BRANCH=None
TEST=build magolor firmware

Change-Id: Ifc562b4a05c8955d2aec105f2f429f926ad1e702
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44633
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

1 files changed, 101 insertions, 2 deletions

diff --git a/src/mainboard/google/dedede/variants/magolor/overridetree.cb b/src/mainboard/google/dedede/variants/magolor/overridetree.cb
index 404024b1d6..630919f268 100644
--- a/src/mainboard/google/dedede/variants/magolor/overridetree.cb
+++ b/src/mainboard/google/dedede/variants/magolor/overridetree.cb
@@ -1,5 +1,8 @@
 chip soc/intel/jasperlake
 
+	# USB Port Configuration
+	register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # Camera
+
 	# Intel Common SoC Config
 	#+-------------------+---------------------------+
 	#| Field             |  Value                    |
@@ -9,10 +12,11 @@ chip soc/intel/jasperlake
 	#|                   | for TPM communication     |
 	#|                   | before memory is up       |
 	#| I2C0              | Trackpad                  |
-	#| I2C1              | Digitizer                 |
+	#| I2C1              | TBD                       |
 	#| I2C2              | Touchscreen               |
 	#| I2C3              | Camera                    |
 	#| I2C4              | Audio                     |
+	#| I2C5              | TBD                       |
 	#+-------------------+---------------------------+
 	register "common_soc_config" = "{
 		.gspi[0] = {
@@ -37,6 +41,101 @@ chip soc/intel/jasperlake
 	}"
 
 	device domain 0 on
-		device pci 15.0 on end
+		device pci 14.0 on
+			chip drivers/usb/acpi
+				device usb 0.0 on
+					chip drivers/usb/acpi
+						register "desc" = ""Camera""
+						register "type" = "UPC_TYPE_INTERNAL"
+						device usb 2.5 on end
+					end
+				end
+			end
+		end # USB xHCI
+		device pci 15.0 on
+			chip drivers/i2c/hid
+				register "generic.hid" = ""PNP0C50""
+				register "generic.desc" = ""Synaptics Touchpad""
+				register "generic.irq" = "ACPI_IRQ_WAKE_EDGE_LOW(GPP_B3_IRQ)"
+				register "generic.wake" = "GPE0_DW0_03"
+				register "generic.probed" = "1"
+				register "hid_desc_reg_offset" = "0x20"
+				device i2c 0x2c on end
+			end
+			chip drivers/i2c/generic
+				register "hid" = ""ELAN0000""
+				register "desc" = ""ELAN Touchpad""
+				register "irq" = "ACPI_IRQ_WAKE_EDGE_LOW(GPP_B3_IRQ)"
+				register "wake" = "GPE0_DW0_03"
+				register "probed" = "1"
+				device i2c 15 on end
+			end
+		end # I2C 0
+		device pci 15.2 on
+			chip drivers/i2c/hid
+				register "generic.hid" = ""GDIX0000""
+				register "generic.desc" = ""Goodix Touchscreen""
+				register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_D4_IRQ)"
+				register "generic.probed" = "1"
+				register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D5)"
+				register "generic.reset_delay_ms" = "120"
+				register "generic.reset_off_delay_ms" = "2"
+				register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)"
+				register "generic.enable_delay_ms" = "12"
+				register "generic.has_power_resource" = "1"
+				register "hid_desc_reg_offset" = "0x01"
+				device i2c 0x5d on end
+			end
+			chip drivers/i2c/hid
+				register "generic.hid" = ""ELAN9050""
+				register "generic.desc" = ""ELAN Touchscreen""
+				register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_D4_IRQ)"
+				register "generic.probed" = "1"
+				register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D5)"
+				register "generic.reset_delay_ms" = "20"
+				register "generic.reset_off_delay_ms" = "2"
+				register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A11)"
+				register "generic.stop_delay_ms" = "280"
+				register "generic.stop_off_delay_ms" = "2"
+				register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)"
+				register "generic.enable_delay_ms" = "1"
+				register "generic.has_power_resource" = "1"
+				register "hid_desc_reg_offset" = "0x01"
+				device i2c 10 on end
+			end
+		end # I2C 2
+		device pci 19.0 on
+			chip drivers/i2c/generic
+				register "hid" = ""10EC5682""
+				register "name" = ""RT58""
+				register "desc" = ""Realtek RT5682""
+				register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_D16)"
+				register "property_count" = "1"
+				register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
+				register "property_list[0].name" = ""realtek,jd-src""
+				register "property_list[0].integer" = "1"
+				device i2c 1a on end
+			end
+			chip drivers/i2c/generic
+				register "hid" = ""10EC1015""
+				register "desc" = ""Realtek SPK AMP L""
+				register "uid" = "0"
+				device i2c 28 on end
+			end
+			chip drivers/i2c/generic
+				register "hid" = ""10EC1015""
+				register "desc" = ""Realtek SPK AMP R""
+				register "uid" = "1"
+				device i2c 29 on end
+			end
+		end
+		device pci 1f.3 on end # Intel HDA
+		device pci 1c.7 on
+			chip drivers/wifi/generic
+				register "wake" = "GPE0_DW2_03"
+				register "maxsleep" = "3"
+				device pci 00.0 on  end
+			end
+		end # PCI Express Root Port 8 - WLAN
 	end
 end