diff options
author | Julius Werner <jwerner@chromium.org> | 2019-03-05 16:53:33 -0800 |
---|---|---|
committer | Patrick Georgi <pgeorgi@google.com> | 2019-03-08 08:33:24 +0000 |
commit | cd49cce7b70e80b4acc49b56bb2bb94370b4d867 (patch) | |
tree | 8e89136e2da7cf54453ba8c112eda94415b56242 /src/mainboard/google/gru/mainboard.c | |
parent | b3a8cc54dbaf833c590a56f912209a5632b71f49 (diff) | |
download | coreboot-cd49cce7b70e80b4acc49b56bb2bb94370b4d867.tar.xz |
coreboot: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX)
This patch is a raw application of
find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g'
Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Diffstat (limited to 'src/mainboard/google/gru/mainboard.c')
-rw-r--r-- | src/mainboard/google/gru/mainboard.c | 18 |
1 files changed, 9 insertions, 9 deletions
diff --git a/src/mainboard/google/gru/mainboard.c b/src/mainboard/google/gru/mainboard.c index d4fa7fc381..19f4ecca55 100644 --- a/src/mainboard/google/gru/mainboard.c +++ b/src/mainboard/google/gru/mainboard.c @@ -97,7 +97,7 @@ static void register_gpio_suspend(void) * 1.5V and 1.8V are EC-controlled on Scarlet derivatives, * so we skip them. */ - if (!IS_ENABLED(CONFIG_GRU_BASEBOARD_SCARLET)) { + if (!CONFIG(GRU_BASEBOARD_SCARLET)) { static struct bl31_gpio_param param_p15_en = { .h = { .type = PARAM_SUSPEND_GPIO }, .gpio = { .polarity = BL31_GPIO_LEVEL_LOW }, @@ -164,7 +164,7 @@ static void configure_sdmmc(void) gpio_output(GPIO(2, A, 2), 1); /* SDMMC_SDIO_PWR_EN */ /* set SDMMC_DET_L pin */ - if (IS_ENABLED(CONFIG_GRU_BASEBOARD_SCARLET)) + if (CONFIG(GRU_BASEBOARD_SCARLET)) /* * do not have external pull up, so need to * set this pin internal pull up @@ -178,7 +178,7 @@ static void configure_sdmmc(void) * In Scarlet derivatives, this GPIO set to high will get 3v, * With other board variants setting this GPIO low results in 3V. */ - if (IS_ENABLED(CONFIG_GRU_BASEBOARD_SCARLET)) + if (CONFIG(GRU_BASEBOARD_SCARLET)) gpio_output(GPIO(2, D, 4), 1); else gpio_output(GPIO(2, D, 4), 0); @@ -226,7 +226,7 @@ static void configure_codec(void) write32(&rk3399_grf->iomux_i2s0, IOMUX_I2S0_SD0); write32(&rk3399_grf->iomux_i2sclk, IOMUX_I2SCLK); - if (!IS_ENABLED(CONFIG_GRU_BASEBOARD_SCARLET)) + if (!CONFIG(GRU_BASEBOARD_SCARLET)) gpio_output(GPIO_P18V_AUDIO_PWREN, 1); gpio_output(GPIO_SPK_PA_EN, 0); @@ -239,7 +239,7 @@ static void configure_display(void) * Rainier is Scarlet-derived, but uses EDP so use board-specific * config rather than baseboard. */ - if (IS_ENABLED(CONFIG_BOARD_GOOGLE_SCARLET)) { + if (CONFIG(BOARD_GOOGLE_SCARLET)) { gpio_output(GPIO(4, D, 1), 0); /* DISPLAY_RST_L */ gpio_output(GPIO(4, D, 3), 1); /* PPVARP_LCD */ mdelay(10); @@ -342,9 +342,9 @@ static void mainboard_init(struct device *dev) if (display_init_required()) configure_display(); setup_usb(0); - if (IS_ENABLED(CONFIG_GRU_HAS_WLAN_RESET)) + if (CONFIG(GRU_HAS_WLAN_RESET)) assert_wifi_reset(); - if (!IS_ENABLED(CONFIG_GRU_BASEBOARD_SCARLET)) { + if (!CONFIG(GRU_BASEBOARD_SCARLET)) { configure_touchpad(); /* Scarlet: works differently */ setup_usb(1); /* Scarlet: only one USB port */ } @@ -370,10 +370,10 @@ void mainboard_power_on_backlight(void) gpio_output(GPIO_BL_EN, 1); /* BL_EN */ /* Configure as output GPIO, to be toggled by payload. */ - if (IS_ENABLED(CONFIG_GRU_BASEBOARD_SCARLET)) + if (CONFIG(GRU_BASEBOARD_SCARLET)) gpio_output(GPIO_BACKLIGHT, 0); - if (IS_ENABLED(CONFIG_BOARD_GOOGLE_GRU)) + if (CONFIG(BOARD_GOOGLE_GRU)) prepare_backlight_i2c(); } |