summaryrefslogtreecommitdiff
path: root/src/mainboard/google/gru
diff options
context:
space:
mode:
authorWilliam wu <wulf@rock-chips.com>2017-01-23 20:54:22 +0800
committerPatrick Georgi <pgeorgi@google.com>2017-02-23 18:51:21 +0100
commitebbdd2882e49c6f94a573ebcf11d04ae1129a928 (patch)
treeed0da5af51b9dc05a44bdc907864a493be7962a7 /src/mainboard/google/gru
parent8c454aaafaf5bc13a50c4f4b3631e6be32fa0bca (diff)
downloadcoreboot-ebbdd2882e49c6f94a573ebcf11d04ae1129a928.tar.xz
google/gru: Tuning USB 2.0 PHY0 and PHY1 squelch detection threshold
According to USB 2.0 Spec Table 7-7, the High-speed squelch detection threshold Min 100mV and Max 150mV, and we set USB 2.0 PHY0 and PHY1 squelch detection threshold to 150mV by default, so if the amplitude of differential voltage envelope is < 150 mV, the USB 2.0 PHYs envelope detector will indicate it as squelch. On Kevin board, if we connect usb device with Samsung U2 cable, we can see that the impedance of U2 cable is too big according to the eye-diagram test report, and this cause serious signal attenuation at the end of receiver, the amplitude of differential voltage falls below 150mV. This patch aims to reduce the PHY0 and PHY1 otg-ports squelch detection threshold to 125mV (host-ports still use 150mV by default), this is helpful to increase USB 2.0 PHY compatibility. BRANCH=gru BUG=chrome-os-partner:62320 TEST=Plug Samsung U2 cable + SEC P3 HDD 500GB/Galaxy S3 into Type-C port, check if the USB device can be detected. Change-Id: Ia0a2d354781c2ac757938409490f7c4eecdffe61 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7d74311c25762668386061234df0562f84b7203e Original-Change-Id: Ib20772f8fc2484d34c69f5938818aaa81ded7ed8 Original-Signed-off-by: William wu <wulf@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/431015 Original-Commit-Ready: Caesar Wang <wxt@rock-chips.com> Original-Tested-by: Inno Park <ih.yoo.park@samsung.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18462 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
Diffstat (limited to 'src/mainboard/google/gru')
-rw-r--r--src/mainboard/google/gru/mainboard.c15
1 files changed, 10 insertions, 5 deletions
diff --git a/src/mainboard/google/gru/mainboard.c b/src/mainboard/google/gru/mainboard.c
index 5926e492cf..bb9b6fca98 100644
--- a/src/mainboard/google/gru/mainboard.c
+++ b/src/mainboard/google/gru/mainboard.c
@@ -260,15 +260,20 @@ static void setup_usb(void)
RK_CLRSETBITS(0xffff, 0xa7));
/*
- * Disable the pre-emphasize in eop state and chirp
+ * 1. Disable the pre-emphasize in eop state and chirp
* state to avoid mis-trigger the disconnect detection
* and also avoid high-speed handshake fail for PHY0
* and PHY1 consist of otg-port and host-port.
+ *
+ * 2. Configure PHY0 and PHY1 otg-ports squelch detection
+ * threshold to 125mV (default is 150mV).
*/
- write32(&rk3399_grf->usbphy0_ctrl[0], RK_CLRBITS(0x3));
- write32(&rk3399_grf->usbphy1_ctrl[0], RK_CLRBITS(0x3));
- write32(&rk3399_grf->usbphy0_ctrl[13], RK_CLRBITS(0x3));
- write32(&rk3399_grf->usbphy1_ctrl[13], RK_CLRBITS(0x3));
+ write32(&rk3399_grf->usbphy0_ctrl[0],
+ RK_CLRSETBITS(7 << 13 | 3 << 0, 6 << 13));
+ write32(&rk3399_grf->usbphy1_ctrl[0],
+ RK_CLRSETBITS(7 << 13 | 3 << 0, 6 << 13));
+ write32(&rk3399_grf->usbphy0_ctrl[13], RK_CLRBITS(3 << 0));
+ write32(&rk3399_grf->usbphy1_ctrl[13], RK_CLRBITS(3 << 0));
/*
* ODT auto compensation bypass, and set max driver